Question about 1984 Dodge D150

1 Answer

How to remove a door lock from a 1970 dodge d-100

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 20 Answers

Should be pretty straight forward,

full the door trim off (usually just scews or torx scews)
(you may have trouble with the manual window regulator, advance sells a tool for like 6 bucks that'll help you get it off....or you can wedge a small rag under it and pull hard to dis-engage the clip that holds it on....this is rather difficult, i suggest buying the tool)

when you say door lock i assume you mean the locking mechanism that does the actual locking

so to get that off there are usually two screws on one side and maybe one more on the inside

then make sure you get it disconnected from the rods that open/close the door and you should be good to go

Hope this helps,
Thomas

Posted on May 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1970 dodge truck ignition switch wiring diagram


Ed, 1970 dodge truck ignition switch wiring diagram. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
http://www.sweptline.com/tech/70_awire.jpg
http://www.sweptline.com/tech/70wire.jpg
1970 dodge truck ignition switch wiring diagram Google Search

Aug 23, 2016 | Dodge Cars & Trucks

1 Answer

2000 caravan the door locks ingage when in motion how to shut off


when you get in the van lock the doors before you "take off" and that should fix that sound you hear when the doors lock. by locking the doors before you leave, the van will tell itself the doors are locked. i know having to lock the doors every time is a hassle, but this should solve your problem.

Aug 11, 2012 | 2000 Dodge Caravan

1 Answer

Both rear door locks not working


I had the same issue on my 2006 Caravan. Both door lock actuators were broken (within a couple of weeks of each other). I replaced them both myself; actuator switches were expensive (close to $100 each).

Jul 22, 2012 | 2006 Dodge Caravan

2 Answers

Power door locks how to disable


Look under the hood at the fuse/relay panel. Lift the top and look inside the lid,it will tell you witch fuse is controlling the door locks. remove the fuse to disable the locks. Or remove the door lock relay under the dash.Hope this will help.

May 24, 2010 | 1999 Dodge Caravan

3 Answers

2005 Dodge Ram drivers side door lock does not work, can only open door from inside using handle. Lock knob won't pull up.Key won't turn enough to unlock door


there is something jaming the handle or broken. remove door panel. check to see if or what is jamed bent or broken. easy to repair.

Mar 14, 2010 | 2004 Dodge Ram 1500

1 Answer

Can i order a key for a 1993 dodge dakota


You can call a dodge dealer, give them the vin# and
they used to be able to cut you a key from that.
But if that method is obsolete, you can try this.
If your key was original equipment, roll the window up
and remove the door panel. Remove the clip from the
linkage rod on the door lock. Remove the spring clip
from the door lock assy. and remove the lock.
The door and ignition lock use the same key. Take
the door lock to a locksmith and they will make a
key for you. Hope this helps.

Feb 05, 2010 | 1993 Dodge Dakota

2 Answers

Electric door locks lock and unlock all the time even if its not running


Hi:
The most likely cause of this is the power door lock control module. You can locate the fuse for the power door locks and pull that, to keep your durango secure. I am not 100% sure , but I think the module is located inside the drivers door.

Nov 18, 2009 | 2003 Dodge Durango

1 Answer

97 dodge p/u. electric door lock on pass. side


remove door panel, acess to latch/soniod *** and remove a couple of rods, one harness, 3 screws and its out. GOOD LUCK RDJRP

Jul 27, 2009 | Dodge Ram 1500 Cars & Trucks

3 Answers

Power door lock do not work. So far I have


2005 caravan's had software issue with power door lock operation..the body controller may need a software update..check with local dodge dealer to see if service bulletin applies to your vehicle..have seen body controller problems as well

Jun 18, 2009 | 2005 Dodge Grand Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...