Question about 1998 Chevrolet Blazer

1 Answer

Security system wont let it start and i have no electric lock override key lock

Posted by on

  • boomer2277 May 13, 2010

    i sure appreciate the help and yourright. i was thinking the 3prong plug under the ignition switch

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 2,019 Answers

Not familiar with the particular system, but if it has an inductive ring around the ignition switch requiring a key proximity, then all you have to do is unplug the ring and decide which 2 wires need to be shunted or opened.

You could also do the bypass at the central control system.

Or you could just wire your own momentary contact push button starter switch. They sell these at Radio Shack, because you only have to power the starter solenoid, which is not that much current.

Posted on May 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Security system operations on 2001 olds alero


Turn the key to acc and wait about 10 minuter for the security light to go solid or stop blinking

Jun 14, 2014 | 2001 Oldsmobile Alero

1 Answer

2003 grand am security system signal car wont start


Turn the key to the on position, leave it on until the security light stops flashing. (About 10 minutes) turn key off, then try to start. If it starts it's a bad body control module. Google override directions.

Feb 17, 2013 | 2003 Pontiac Grand Am

1 Answer

96 ford taurus won't turn over


You can't override the security system on this car, if it was easy what good would it be. You will need the dealer to scan the system to see why it is activating and locking out the engine start.

Nov 01, 2012 | Cars & Trucks

1 Answer

2000 dodge ram 1500 electrical issue


When you turn key on does it click repeatedly? When an alternator is going bad the electrical goes all kinds of crazy sometimes, you may want to start there if you havent chkd that yet.

Oct 31, 2012 | Cars & Trucks

1 Answer

I have a 98 Camry. The ignition switch had been replaced prior to purchase, so there is a different key for the ignition than the doors. Who ever installed the switch tiewrapped the old key to the side of...


I WOULD GO AND GET NEW IGNITION SWITCH THEY TIEWAPPED OLD KID? YA I WOULD SAY START BY REPLACING SWITCH THE RIGHT WAY. THEN IS PROBLUM IS FIXED AND U WANT ONE KEY FOR ALL GO TO A LOCK SMITH SO HE CAN MACH UP TUMBLERS IN SIDE LOCK SO ONE KEY WORKS ALL

Apr 24, 2012 | 1998 Toyota Camry

2 Answers

Is there away to override or reset the security system my car was running fine now it wont turn over and the security light comes on when you try to start it


to disable the security, make sure all doors are closed, and the key out of the ignition, go to the passengers side lock and unlock it a couple of times with the key, do the same to the drivers side.. most of the time this will disable any security that the vehicle has got...also just saw last week, a family member of mine went without a vehicle 3 days because it wouldnt start and had a security light on...i went and looked at it.. used the same key he always used, i noticed that it was a key that was duplicated, and not the original.. i had him get me the original, and the vehicle started right up... never done that to him before, not sure why it started doing it.. but the key had a chip in it that the ignition reads, and if the key isnt the factory chiped key the vehicle wont start.. dont know if your vehicle is the same, but its something to think about.. hope this helps

Dec 10, 2010 | 1992 Cadillac DeVille

1 Answer

My mark 7 wont start, it cranks but wont fire.the day before it ran and drove fine


is the security light flashing? its usually a problem with the security system. try locking and unlocking the doors with the electric locks and trying again. also if you have another key you might try that the ford house can check your keys are working properly

May 05, 2009 | 1998 Lincoln Mark VIII

2 Answers

2000 Alero Security light flashing and wont start


With the new lock cylinder in it, turn the key on. The security light should blink. Leave the key on for 10 minutes, the security light will quit blinking and go out after 10 min. This will reprogram your security system and the car should start. Also leave a battery charger on it while the key is on, If the battery goes dead during the 10 minute reprogram sequence, you will have to start over again.

Mar 08, 2009 | 2000 Oldsmobile Alero

2 Answers

Security system installed by ford on a 1996 f250


YOU MAY TRY PUSHING LOCK AND UNLOCK AT THE SAME TIME FOR 15 SECONDS ON YOUR CONTROLER TO RESET IT ?

Jan 27, 2009 | 1996 Ford F250 Crew Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...