Question about 2001 Ford Windstar

1 Answer

How to change front driver side brakes - 2001 Ford Windstar

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 183 Answers

Well, first of all if the drivers side need a brake change, common sense would lead you to do both sides then, also the pads are sold in pairs, you cant just buy the front left ones. You jack up the car, take off the wheel, remove the bolts holding on the caliper, pull it off, replace the pads, push in on the piston and reinstall the caliper/bolts/wheel etc. that's it

Posted on May 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I bleed the brakes on a 2009 Pontiac G6?


when replacing the brakes you usually dont bleed the system ---usually bleed system when air gets in from like changing a line master cylinder or caliper-- and or master is empty .but to bleed you start at passenger rear first than drivers side rear,up to passenger side front ending at drivers side front

May 25, 2016 | 2009 Pontiac G6

1 Answer

95 Chevy lumina front brake caliper won't adjust


Are you saying the piston will not compress ?

Jun 22, 2013 | Cars & Trucks

1 Answer

I have oil leaking from the rear driver side tire after changing the front brake pads, (did not bleed the brakes)


you have a rear wheel cylinder leaking and its puerly coincidental that you saw it at the same time as changing the front brake pads

Jan 23, 2011 | 2004 Chevrolet Cavalier

1 Answer

Squealing sound - front driver's side brakes


This sounds like a wear indicator( a metal tab on the brake pad) is doing its job, warning you that the brake pads need replacement soon. you can bend the wear indicators away from the rotor so they won't make contact. This will stop the annoying noise. Replace the pads and check the brakes soon. Brake pads should always be changed on both wheels at thge same time, so change the other front pads also.

Nov 27, 2009 | 2002 Kia Sportage

1 Answer

Brakes still spongy


need to perform abs service bleed, as far as i know only the dealer can do

Jul 02, 2009 | 2006 Chevrolet Malibu Maxx

1 Answer

Brakes?


change the rotors you most likly have a thickness variation causing the brakes to pulsate

Oct 22, 2008 | 1999 Nissan Quest

1 Answer

Front brake pads for 1997 ford ecscort encore


The binding of the brakes is causing the pads to overheat, which is causing the smoke. You need pull the wheel and check things out. Your caliper must be bad (not releasing). You need to replace the caliper, brake pads, and have the rotor cut (a full service parts store or shop cuts the rotor perfectly smooth on both sides), or replaced (it may be cheaper to just buy a new rotor). You should also always change the pads (and check everything else) on the opposite side. So, if u do the brakes on the driver side front, always do the front pass. side at the same time, likewise if u do rear brakes.
Whenever you do brakes u should also flush out the brake lines (by bleeding the brakes) until the brake fluid flows absolutely clear. Old brake fluid is the #1 reason for caliper failure. I've seen many times people replace brake components w/out changing the brake fluid, only to have the brakes wear out very quickly, or not function properly. good luck! hope this helps> please rate this!couontrycurt0

Oct 12, 2008 | 1998 Ford Escort

1 Answer

Changing Brakes


you will need to bleed the brakes once you are done to get the air out of the lines.
if you need help chaing them please comment back. also you will have to bleed the breaks in a certain order.
start at the passanger side rear than move to the drivers side rear than the passangers side front than the drivers side front.

Aug 03, 2008 | 2005 Buick LeSabre

Not finding what you are looking for?
2001 Ford Windstar Logo

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...