Question about 2006 Honda Odyssey

1 Answer

How to change rear tail light on 2006 honda odyssey

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

Lift the rear door, remove the rear tail light lense, replace the bulb and replace the tail light on the car.... once the screws have been removed, be sure all of them are removed,,, the lens/light cover may have to be pried off with a flat blade screw driver.... place a folded paper towel of something else to protect the paint.... before prying...... Check the owners manual for instructions.

Posted on Jul 17, 2010


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 486 Answers

SOURCE: Have a 2006 Honda Odyssey Touring - tail lights

dealer is and ***, there will be a fuse somewhere for that area, what else does not work, normally each sidelight is a separate curcuit, front and rear on each side on same curcuit, hence would guess bad earth curcuit in the unit. email honda and report dealer and ask same

Posted on Dec 22, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

The right side tail lights within the hatch of my 2006 Honda Odyssey are inop. I changed them and that didn't help. The outer lamps for the right tail light work OK. Where do I go now?

see if u have voltage at the socket. Try a working bulb, If not ck the wiring for a break. usually at the trunk hindge is a popular electrical short location.

Dec 14, 2016 | Honda Cars & Trucks

2 Answers

1995 honda odyssey - how do you remove the tail light lens cover to change the brake lights?

inside the rear cargo are are 2 pop out access flaps, remove them and peer inside. The Tail light guts are visible. Bolts to remove the entire assembly, or get some small hands to twist out the offending bulb sockets. Careful, body acces hoes have sharp edges.

May 10, 2011 | 1995 Honda Odyssey

1 Answer

Where is the rear license plate light fuse on a 2007 Honda Odyssey

Your license plates work on the same curcit as your tail lights so therefore have the same fuse, if you tail lights are working and your plate lights not it isn't the fuse. check the globe and contacts where the globe and globe holder fits.

A bit of penetrating oil often does the trick.

Feb 14, 2011 | 2007 Honda Odyssey

1 Answer

Honda odyssey tail light remove instruction

Open liftgate, remove two small flaps covering bolts, remove bolts, and pull light straight back towards the rear of the vehicle. Dont go towards the side of the vehicle. It will feel like its not going to budge when removing.

Mar 29, 2010 | 2005 Honda Odyssey

1 Answer

Have a 2006 Honda Odyssey Touring - tail lights went out but brake lights and turn signals both work. Dealer said there is no fuse for the tail lights (owners manual listing of fuses does not show any for...

dealer is and ***, there will be a fuse somewhere for that area, what else does not work, normally each sidelight is a separate curcuit, front and rear on each side on same curcuit, hence would guess bad earth curcuit in the unit. email honda and report dealer and ask same

Dec 22, 2009 | Honda Odyssey Cars & Trucks

2 Answers

Removing rear light assembly on honda odyssey 2006

Yes, there is a "spear point" plastic clip that is still engaged into a socket type holder in the front outboard portion of the tail lamp assembly. Pry gently with a tape wrapped screwdriver at the front outboard corner of the assembly and the clip will release. You will then be able to see how the clip works and will be able to align and engage it first when replacing the tail lamp assembly.


Jan 24, 2009 | 2007 Honda Odyssey

1 Answer

2003 Honda Odyssey Brake light replacement

open the rear hatch. Between the tail light housing and the rear hatch opening there is a trim strip with two flush fitted flap doors. Insert a small straight blade screwdriver into the small slot on the tail light side of the flap. Pry gently inboard and the small flap will open (the hinge side of the flap is on the side of the rear hatch opening.) Now you can remove the screws that hold the tail lamp assembly in place. Finally, there is still a "spear point" clip that fits into a socket near the front outboard corner of the assembly. Gently pry with a tape wrapped screwdriver (avoids scratches) and force the assembly straight back. The clip should release and free the assembly so you can change the bulb(s).

Jan 22, 2009 | 2003 Honda Odyssey

Not finding what you are looking for?
2006 Honda Odyssey Logo

958 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts


Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides