Question about 2004 Chevrolet TrailBlazer

1 Answer

Engine light came on, code po410 came up.

Engine light came on code po410 came up.

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Chevrolet Master
  • 1,311 Answers

This has to do with the secondary air pump system, this system is used at cold start-up and involves three components; air pump, solenoid valve and a relay. Many times the valve becomes stuck or clogged, the relay has also been known to fail.

Posted on Oct 27, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code 410


code po410 on a 2004 gmc envoy is that there is a problem with the secondary air injection system, you will need to check the fuse located in the engine compartment first, the next step is to start the truck cold and listen for the air pump to turn on for a few seconds, this will sound like a jet engine but not that loud, after it runs for 5 min and you dont hear it then you may have a bad pump which is located under the driverside on frame but if you hear the pump then you may have a bad valve, this valve is located on the exhaust manifold area and has a hose from the pump to valve, remove the hose and check for water, drain any water in the hose, also remove hose at pump and drain, the most common cause for this code is the valve is not opening and the air pump gets water inside and goes bad, thats the po410 code. a quick note; if fuse is blown look under truck near pump and check relay as it fills with water and blows fuse, if this is the case replace relay and blow water out of connector.good day.

Dec 06, 2011 | 2004 GMC Envoy

1 Answer

Check engine light on w/po410 code what part is bad


Yours must have the California emission system. They use a secondary air injection system to help reduce emissions. It could be that the pump has gone bad. Have you tried to reset the code? I've seen cars that had this problem and just to erase the code took care of the check engine light. If that doesn't work, make sure your electrical wires are ok, and plugged in. Check to make sure you have voltage at the plug at the pump motor, you may have to start the car to check it. If there is no power there, then check your fuses and relays.

Mar 14, 2011 | 2000 Pontiac Montana

1 Answer

My check engine light is on i keep getting the code po410 and it is ideling really high sometimes


p0410 is an emission problem, Check the fuse for the air pump. Listen to see if it comes on when the engine is started, colder start. Make sure that the vacuum lines is still on, both ends. Common Problems That Trigger the P0410 Code.
  • Defective Air Pump Check Valve(s)
  • Faulty Air Pump or Air Pump Relay
  • Faulty air control solenoids or vacuum lines
  • System may be restricted or plugged with carbon.

Mar 05, 2011 | 2005 Saturn SC2

1 Answer

Engine code po307 AND PO410


Hey; Code 307 is a code for misfire on cylinder #7. It could be caused by bad spark plug, ignition module. If engine has a miss then I would replace the spark plug first. If that don't fix then it will require further diagnosis with a scan tool. Code PO410 is for the secondary air injection system. Make sure the vacuum hoses going to the valves on the front and rear cylinder banks are connected and the hose(s) not damaged. Also make sure the solenoid is connected both electrical and vaccum' Maybe this will help

Aug 30, 2010 | 2001 Cadillac DeVille

1 Answer

Engine light came on, code po410 came up.


http://www.obd-codes.com/p0410 at the very top of this site you will find your answer

Mar 19, 2010 | 2004 Chevrolet TrailBlazer

1 Answer

Engine light code P0410


a po410 code is, Secondary Air Injection System Malfunction.

Jan 30, 2010 | Saturn SL1 Cars & Trucks

1 Answer

Check engine light on pulled code po410


this is caused by a defective seconday air injection pump, replace the pump.

Apr 06, 2009 | 1999 Chevrolet K1500

2 Answers

Loud air sound


If there is an engine code po410 you have problems with your airpump. There are bulletins out on this situation.

Oct 16, 2008 | 2004 GMC Envoy

Not finding what you are looking for?
2004 Chevrolet TrailBlazer Logo

684 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...