Question about 1997 Mercury Mountaineer

1 Answer

We bought it used and we dont know the keyless

We bought it used and we dont know the keyless entry code. Can u help me find the code or reset the keyless entry its a 1997 mercury moutiouneer

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Take the plastic cover off of where the jack / wheel wrench is located on the rear left side. Standing in the back of the vehicle, look forward (toward the steering wheel) and you will see a computer module. The factory code is typed on that module. You might have to "carefully" pry the plastic out and do some mild acrobatics to see the code, but that is where it is. After you find the code, go to your owners manual and reset the code to your own numbers. You will have to do this every time the battery is disconnected, so you might want to just remember the factory code. Good Luck

Posted on May 22, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I just bought a used MercuryMountaineer 2004. I do not know the code to the side for numeric keyless entry. How would I reset it to my own code?


You need to go to the dealer, to get the
MFG Code and instructions for the
Keyless Entry System,then you can
put in your own code

Mar 11, 2011 | Mercury Mountaineer Cars & Trucks

1 Answer

I bought a used 1993 Sho Taurus want to find the code to reset the keyless entry


the easiest way to go about resetting the keyless entry is to take it to a ford dealer or specialist to reset it is fairly cheap and to have a new one installed isnt bad either

Jan 14, 2011 | Ford Taurus Cars & Trucks

2 Answers

2001 ford explorer sport, door keypad reset


How to find the Security Keyless Keypad Code on the 1995-2001 Ford Explorer or Mountaineer and how to use the Keypad functions. The factory code is also printed on a label which is installed on the Remote Anti-theft Personality (RAP) Module. This is the module that controls the keyless entry system. It is located in the left rear quarter behind the removable panel (see photo). You will need to turn the two thumb screws counter clockwise and take the plastic panel off to be able to see the unit. A flashlight may be helpful in seeing the code. You are looking for the module and the 5 digit code on it like the one shown below.

1948e32.jpg


Now that you’ve got the code I’ll tell you how to use the Keyless entry and set-up your own code.Make sure when pressing the controls on the keyless entry keypad you press the middle of the buttons to ensure good contact with the controls.

4f796b1.jpg

Check this for Programing the Keypad.

Hope this help (remember rated this comment).

Mar 29, 2010 | 2001 Ford Explorer Sport

2 Answers

Keyless entry


I bought a Ford and luckily the owner knew the code. Ford told me I would have to bring it to them if I didn't have code.

Mar 17, 2010 | 1994 Ford Thunderbird

2 Answers

How to reset factory code on keyless entry ford five hundred


if you do not already know the factory code, the only way it can be obtained is by your local ford dealer. the proprietary computer equiptment they have can access the code that is programed in vehicles security module. if you purchased it used..it is often that the keyless entry code id card is still withe the owners manual..it is a 5 digit code printed on an credit card sized card that is white in color..i hope this helps you...good luck

Jun 07, 2009 | 2005 Ford Five Hundred

1 Answer

I bought a used freestyle without knowing the keyless entry code and need to know where the computer module is.


The dealer will have to recover the code for you. Look at spending about 100 bucks unless you are getting other work done they will usually do it for free if you have other biz with them.

Jun 01, 2009 | 2005 Ford Freestyle

2 Answers

I need the keyless entry code for my car


It should be on the computer. But this computer is behind the panel in the left, rear part of the vehicle. But if the code doesn't work then either the past owner changed it or there is another issue.

May 23, 2009 | 1993 Nissan Maxima

1 Answer

Resetting keyless entry lock on door, dont know the old code


dealer can help you out but i think the orignal one will always be in the computer even when you change it

Mar 01, 2009 | 2006 Ford F-150

1 Answer

Keyless entry code


They normally stamp the Keyless entry code in the trunk and if not I belive the Computer that controls this is located behind the Glove box and they normally have the code printed on it.

Jan 11, 2009 | 1987 Lincoln Mark VII

2 Answers

Keyless door pads


Go to www.customersaskford.com - type in the text box - keyless entry - then press the "ask" button

Jun 21, 2008 | 2002 Mercury Mountaineer

Not finding what you are looking for?
1997 Mercury Mountaineer Logo

594 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

fordexpert

Level 3 Expert

5537 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...