Question about 2006 Jeep Liberty

2 Answers

2006 Jeep liberty sport remove door panel driver side

2006 Jeep liberty sport How do you remove the drives side door panel? I have remove the 2 screws and that's all I see. For some reason the window motor shaft keeps breaking I have had 2 replace on the drive side rear now its the front drive side.

Posted by Anonymous on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

The window regulator mechanism on these vehicles is faulty and failure is repetitive. There is a new model regulator which can be put in, but I understand that requires a new window also. A very good option is the regulator repair kit from Steiger which repairs the existing regulator and replaces the failure prone plastic part with a metal replacement. I have not seen one of these fail. The site for the kit is:
http://www.steigerperformance.com/products/sp13001.html

The kit is specific to the window so a front right works only on that door and no other, so be sure to order the correct kit for what you need. It comes with a good set of instructions; and you can, if you are a bit handy, do it yourself. You can download the instructions first before buying to give them a look. I would recommend this over ever using an original equipment part. I have now replaced every one on my liberty.

Posted on Jan 11, 2015

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

2005 jeep liberty,the key will not unlock the driver side door and the power lock will not unlock the driver sider door.

Posted on May 21, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I R&I the trim panel of the left side passenger door of an 2005 jeep liberty


read the fsm ?
read alldata.com?
google this see 1mil hits, same with youtube. dah?
or pry from bottom up, POP goes the rivet.? fastener.
all screws off first of all things on surface, sure.

Sep 02, 2014 | 2005 Jeep Liberty Sport

1 Answer

Need help replacing abs sensor on 2006 jeep liberty front driver side


You will find it bolted in to the hub assembly, behind the rotor, I believe you will need a 10mm wrench to remove it, pull straight up and out

Mar 31, 2012 | 2006 Jeep Liberty Sport

1 Answer

Air blend door jeep liberty 2010


My blend air door is stuck on my 2010 liberty. I have removed the actuator panel on the drivers side and the middle door that controls the air flow to the dash is completely seized. There are 4 blend air doors on this liberty, 2 control the heat/ac and 2 control the air flow.
there is no access to them from the drivers side and the passanger side looks like I have to cut into the air box to get to them.

Jan 03, 2012 | 2010 Jeep Liberty

1 Answer

Remove interior rear door panel


On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls.

May 13, 2010 | 2007 Jeep Liberty Sport

1 Answer

How do you remove rear drivers side door panel on 2002 jeep


Several steps in here; review the KJ-2002-Liberty-Service-Manual-PDF-Secc-23-Body (page 128 and next).

I hope help you with this. Remember rated this help, good luck.


Sep 04, 2009 | 2002 Jeep Liberty

2 Answers

I'm trying to change the brake light on the driver's side of my 06 Jeep Liberty but the rear door is in the way of the screws to remove the tail light assembly. Any solutions?


Open the tailgate all the way. From the inside, use a #25 star bit on a socket wrench with about a 6 or 8 inch extention.

Aug 06, 2009 | 2006 Jeep Liberty

1 Answer

2003 Jeep Liberty Power Window Off Track


its the window regulator. not to bad to change. just a couple of screws to remove the door panel. peel the liner back & remove the 6 10mm bolts and uunhook the electrical connector and the window from the regulator. installation is reverse

Jan 21, 2009 | 2007 Jeep Liberty Sport

1 Answer

Replace Driver's side mirror - Jeep Liberty 2002


The door panel has plastic clips that hold it in place also. Put a thin blade screwdriver between the panel and door. Pry the panel away from the door. The panel will make a loud snapping noise, that is the clip coming out of the retaining hole. Sometimes the clips break.

Dec 09, 2008 | 2002 Jeep Liberty

1 Answer

Rear passenger side window stuck in down position


1) Yes you are right to think that it is the regulator.
2) You can repair this.

Remove the screws that hold the door panel on.
Remove the door panel. There are alot of clips on the door panel that just need to be pulled out with panel while removing.
Remove debris shield.(plastic piece between door panel and door.
The regulator will be visible at this point.
Disconnect the electrical connector from the regulator. Separate Glass from regulator. Some use clips some use bolts to hold the glass to the regulator.
Remove regulator attaching bolts.

Thats it just reverse the procedure for installation.

Aug 29, 2008 | 2006 Jeep Liberty

Not finding what you are looking for?
2006 Jeep Liberty Logo

1,113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...