I need a detailed diagram of a '93 ford E250 rear drum brake assembly. I just bought the van and thought it would be a simple repair but the brake shoe assembly was pushed so far past needing replaced that the shoe backing has been pushed into a V shape and has almost disintigrated. Springs and cables have fallen off both sides and I need to know how to assemble the new parts.
SOURCE: Parking brake seized
Are the parking brakes on, or they won't go on? The cable from the front e-brake pedal back to the rear wheels has probably seized due to corrosion. Soak it over several days w/ wd-40 or some type of penetrating oil and it may loosen up the cable. If u have 4 wheel disk, just pull off rear tires for access to cable connection to brake pads. Use penetrating oil at any points where cable attaches to rear pads (don't get any on the pads ) good luck countrycurt0
SOURCE: Need Diagram 93 suburban rear brake shoe springs
make sure your star wheel is moving freely. usually located at the bottom betwwen the shoes that's your adjuster and when it seizes up then you lose adjust
SOURCE: re-assemble of front brakes on ford focus 04
This might sound dumb, but if you haven't used a C-Clamp to push the piston in the caliper back in, then you will not be able to get it back on. Also the guides for the two bolts will need to be gently pushed back so they are not in the way of the bracket. Hope this helps.
Chris
SOURCE: Mustang parking brake won't release tension on rear brakes
since the new pads are alot thicker than the old ones,the brake needs to be set properly.
something is not right for sure.
the retainer for the park brake cable may be not in the right spot.there is two places it can fit.
SOURCE: need picture of rear brakes to reinstall springs
go to youtr local library and they have manuals for most cars you can use and copy for free
474 views
Usually answered in minutes!
×