Question about 2003 Mitsubishi Outlander

Open Question

How to remove second and third row of seats of mitsubishi grandis, I need to transfer a lot of baggage so I do not need seats. thanks

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: removing the 2nd and 3rd row seats

3rd row, you simply pull the lever which makes the back fold down and then grip the handle located on the bottom and pull toward you slightly hard. They are heavy so it seems like they aren't coming out, just pull hard. second row, you flip all the way up and push with them standing up and they come unhooked. Good Luck! I didn't have any problems, except they are at least 50+lbs!

Posted on Jan 07, 2009

  • 6 Answers

SOURCE: How can I remove front row seat headrest?

Most volvo headrest can be removed by releasing the catches which are on the back of the headrest on some models and on the front on others I believe on 960 they are on the back. To release the seat on a 960 look where the shafts should be then follow it down on the back where the seat back top stops then goes in press around that area you should be able to find the catch there pull up on the headrest while releasing the catch you have to do this on both sides. The headrest should come off this also works on 740 and 760 series the volvo 780 is a different story the only way to get the headrest off on that is to disassemble the seat

Posted on Mar 14, 2009

  • 1 Answer

SOURCE: lifting up whole 2nd row seats to access fuel filter

supposed to unlock with levers to fold back rest down,my 2000 nm has same prob I have to get large flat blade screwdriver or similarobject and get in back(stow rear dicky seat first)and lever the catches that lock base to floor not hard after you have done it once and seee how it works.hope this helps and works for you.

Posted on May 22, 2009

ourhowse
  • 2007 Answers

SOURCE: How do you remove the headrests on the front and third row seats?

There is a small hole at the base of the headrest post. Use a nail and push in the hole to release them.

Posted on May 31, 2009

  • 61 Answers

SOURCE: my Mitsubishi Chariot Grandis GDI, V6 Royal N86W

205 is the width in mm. 65 is the hight of the sidewall (.65x205=133.25mm)65 percent of the with. 15 is the diamater in inches of the rim (tire hole) for example if you keep the same rims 205 75 15 would be the same width but slightly taller.
215 65 15 is wider and taller as 65% of 215 is 139.75 millimeters. if you go to 16 or 17 inch rims u can get much bigger. the width of the tire must not rub on the insides of the fenders. the hight must not contact the top of fender taking in consideration the suspension. u can look for car clubs of that model and chat with the members.

Posted on Jul 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I remove the third row seats on grandis?


Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Best Manuals

Jul 25, 2016 | 2006 Mitsubishi Grandis 2.0

1 Answer

How to remove back seats from 1998 Mitsubishi Chariot Grandis?


Jack up the car, look underneath where the seats are located and you will find the nuts attached to the bolts that hold the seats in place.

Feb 02, 2015 | Mitsubishi Cars & Trucks

1 Answer

How do I remove second row seat?


What type of vehicle are we talking about?

Nov 17, 2014 | 2005 Mitsubishi Montero

1 Answer

My power third row seat don't work, I tested the motors and they work fine when power directly. When I measure the voltage at the connectors I get about +/- 10 volts, from any of the 4 switches. I verified...


Your missing something's G-404 has nothing to do with it !
Seats - Third Row
The third row seat:
  • is three-passenger seat.
  • a 60/40 bench seat.
  • folds down for more cargo area.
  • has optional power fold down seats.
Third Row Power-Fold Seat
CAUTION: To prevent possible damage to the third row seat or the safety belts, make sure that the safety belts are not fastened when moving the seat to the load floor position.
CAUTION: Make sure that no objects such as books, purses or briefcases are on the floor in front of the third row seats or on the seat cushion before lowering the backrest(s).
The third row power-fold seat consists of the following electrical components:
  • right third row seat relay.
  • left third row seat relay.
  • right power-fold seat motor.
  • left power-fold seat motor.
  • right front third row seat switch (if equipped).
  • left front third row seat switch (if equipped).
  • right rear third row seat switch.
  • left rear third row seat switch.
For the third row power-fold seat to operate, a shared ground is supplied by the body security module (BSM) to both of the power-fold seat relays, enabling the seats to then be moved by pressing one of the third row power-fold seat switches. The third row power-fold seat operates only when the vehicle is in PARK and the liftgate glass, liftgate door or any entry door must be open.
The third row power-fold seat motors transfer movement to a drive gear assembly to raise and lower the seat backrest. The power-fold seat motors rotate a short drive cable which is connected to the drive gear assembly.
The relay's are located in Aux. relay box #2

May 24, 2017 | 2003 Ford Expedition

1 Answer

How to remove third row seats in 2001 Mitsubishi Chariot


same way as you slight the front seat forwart.lift the bar up underneed the seats

May 30, 2013 | 1998 Mercury Villager

1 Answer

Wet Floor at Third Seat


your ac drain is blocked

Jan 17, 2013 | 2008 Ford Expedition

2 Answers

2004 ford expedition: changed battery, now rear seats will not go up or down. One is up the other one is down. They were working fine before the battery was replaced. Wifes car need to fix, she is...


Call the dealership and ask them how to reset the electronic on your Ford Expedition after changing the battery. Anything else is happen? Maybe like the radio wont turn on, hit the turn signals and the windshield wiper turn on. ***** things happen after replace the battery. I know what it is, it the darn wigits. GB you....stewbison

Aug 21, 2011 | Ford Expedition Cars & Trucks

1 Answer

I have a 1991 7 seater Mitsubishi Pajero (Montero) and want to remove the rear (third row) of seats - how do I do it?


at the pole of the seat, on the floor... you can see the bolt for the seat. dismantle all the screws and...its done.

Nov 20, 2010 | 1991 Mitsubishi Montero

2 Answers

I want to make my 1999 Mercury Villager Sport into a cargo loader, with just the front seats kept and the rest of the back empty. How do I remove the other 3 seats? So far, I can't get any of them to budge...


the middle seats come out easily. There are 2 handles you have to lift up on each of the bucket seats, they are in the front of the seat down by the seat tracks. After you lift them, tilt the seat upward in the front and rotate them backward. Then lift out of the hooks. Each seat is held down by 4 hoks.

The 3rd row seat is not designed to come out xcept by a technician. It does slide forward all the way up to the front seat. It has a sliding seat track.
First, lift the T handle under the seat cushion on the left front side of the seat. This will allow you to lift the seat bottom up all the way to lcok in the full up position.
Then, lift the lever on the same side of the seat and slide the seat forward. It will stop in 4 places.
Rear -Rear
6 inches forward of that.
another two ft to the second row seating position
full frward against the front seats.

Pleae rate as fixya if this helps.

c4253aa.gif Seat —Third Row Bench Removal
sxv~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Removal of the third row bench seat requires more than one technician.
  1. Remove the second row seats. For additional information, refer to Seat—Second Row .
  1. Remove the floor mats.
  1. Lock the seat cushion in the upright position.
    1. Lift the handle to release the cushion.
    1. Lock the seat cushion in the upright position.
0235766.gif
  1. Move the third row bench seat to the second row position.
    • Lift the seat track release handle.
  1. Remove the two bolt covers.
  1. Remove the two seat track front bolts.
  1. Remove the four seat track rear bolts.
    1. Position the rear seat cushion floor cover aside.
    1. Remove the four seat track rear bolts.
  1. Remove the third row bench seat.

Mar 02, 2009 | 1997 Mercury Villager

Not finding what you are looking for?
2003 Mitsubishi Outlander Logo

Related Topics:

1,634 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...