Question about 2001 Chrysler LHS

1 Answer

Engine light came on about 5 days ago, took it to a mechanic who turned light off, but it came back on later that day. went back to mechanic and he plugged his machine up and said a code came up indicating that i needed to have the transmission taken apart to diagnose problem. he asked if i had any problems the car shifting when i drive. and i have not had any problems. he said i could probably wait until something does happen cuz it could just be something as simple as a sensor, etc what do u recommend?

Posted by on

  • bmiraculo343 May 13, 2010

    i think the code is p0740, a torque convert code

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,317 Answers

I would consult a good transmission repair shop or a Dealership and get there opinion on the code that is coming up, if there is a real problem, it may be a simple fix, but if let go, it could possibly cause some real damage. Did he give you the code that came up?

Posted on May 13, 2010

  • bmiraculo343 May 13, 2010

    think the code is p0740, a torque convert code

  • James Milzheimer
    James Milzheimer May 13, 2010

    I would take the car to the dealer or a transmission shop that can perform the 41TE Transmission Diagnostic Procedure with a DRB3 or any high-end scanner capable of accessing operations of the 41TE trans.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have electrical issues on a 2004 mazda 3.


I would check every single fuse in the car. Blown fuses can cause weird issues like this. While the initial issue with the mechanic does sound like an alarm problem....the rest does not unless the shop that installed it really butchered the job.

Jul 18, 2016 | 2004 Mazda 3

2 Answers

Why is battery draining ford 2002 Taurus SES


Remove negative cable from battery, connect a test light to negative terminal, opposite end off light to negative battery post. ( let sit for 3 to 5 minutes). Then start pulling fuses, when the light goes out that's your bad circuit. God-Bless! Its worth a try.

Oct 01, 2015 | 2002 Ford Taurus

1 Answer

Service engine light


Need a different mechanic

They never tested anything,
if you got codes

Sep 16, 2013 | Saturn Cars & Trucks

1 Answer

My 2004 Pontiac Montana had the service engine soon light come on. It then took 2 times of turning the key for the van to start. Then two days later I went to leave work and it wouldn't start at all. Just...


good year are tire people trying to be mechanics
take it to an accredited service shop that has experience on your make of vehicle
have the new service center run the fault codes which is what goodyear should have done first up

May 23, 2017 | 2004 Pontiac Montana

2 Answers

A few days ago the check engine light turn on in my 2004 Chrysler Sebring and I got the code P0137. The light went off the next day but I still took the car into the dealer and they changed out the O2...


COULD HAVE SHORT IN WIRING CIRCUIT OR PCM PROBLEMS.IT WOULD NOT BE SAFE TO DRIVE CAR WITH O2 SENSOR FAULT. BECAUSE FUEL MIXTURE WOULD BE TOO RICH CAUSING CATALYTIC CONVERTER DAMAGE CAUSING IT TO OVERHEAT GET RED HOT UNDER CAR CAUSE FIRE AND YOU WOULD HAVE A LOT OF FUEL CONSUMPTION .I WOULD NOT DRIVE CAR.BETTER TO USE A RENTAL CAR FOR LONG TRIP GET CAR CHECK OUT AGAIN AT THE DEALERSHIP.

Jun 24, 2011 | 2004 Chrysler Sebring

1 Answer

Check engine light and knocked off rockers


Running rough and misfiring is usually a one or more bad spark plug wires. Don't go back to that dealer. Replace the wires or have your mechanic do it for you. If you replace them, take one off at a time and install the new one. If you put the wires back on in the wrong order, it will misfire.

May 25, 2010 | 2003 Jeep Liberty

1 Answer

Check engine light


U NEED TO TAKE IT TO A SHOP THAT HAS A VOVLO SPECIFIC SCAN TOOL.THE GENERIC SCAN TOOL HAVE TROUBLE READ THE VOLVO CODES ESPECIALLY IF U ARENOT DEALING WITH A TOP NOTCH TECHNICIAN

May 15, 2009 | 2004 Volvo S60

3 Answers

Check engine light


OK, what is the question you want answered?

Sep 03, 2008 | 2006 Volkswagen Touareg

Not finding what you are looking for?
2001 Chrysler LHS Logo

Related Topics:

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...