Question about 1997 Honda Prelude

Open Question

I have a 1998 honda prelude i need to know what code p1399 and p0325,p0300 is

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

pctech1
  • 1940 Answers

SOURCE: Engine Diagnostic code P1399 for

  1. This code means Random/Multiple Misfire Detected. Start by changing out your spark plugs and spark plug wires, most importantly the wires. If this doesn't fix the problem, you may need a new distributor cap/rotor, or ignition coil.
  2. In some rare cases, I have seen this problem caused for malfunctioning fuel injectors.

Posted on Mar 01, 2011

  • 14036 Answers

SOURCE: 2000 honda crv p1399 and p0301 check engine codes

CODE PO301 IS CYLINDER 1 MISFIRE DETECTED.POSSIBLE CAUSE.BAD PLUG AND WIRE.BAD COIL.BAD FUEL INJECTOR OR WORN VALVES TO THAT CYLINDER.OR LEAKING INTAKE AT THAT CYLINDER.

Posted on Mar 08, 2010

ZJLimited
  • 17970 Answers

SOURCE: I have a honda civic lx 1998 I need to know what

Get your self a EGR valve it is sticking or the EGR port is blocked i can tell you how to test it you have a volt meter but i am 100% THAT WHAT IT IS
Code P1399 is a pending misfire code.
HOW TO TEST

1. Check EGR position sensor voltage on the White/Black wire at idle - look for 1.1 - 1.2 volts with the EGR valve closed. If the EGR position sensor voltage is higher than 1.2 volts, the EGR valve is stuck open.

2. Can unplug the EGR valve and apply power to the terminal on the EGR valve that the Pink wire would normally go to and ground the terminal on the EGR valve that the Black wire would normally go to and see if the engine stalls at warm idle.

Posted on Oct 14, 2009

MARZX
  • 61 Answers

SOURCE: honda civic code p1399

My friend; Try this; Go to the net, find Honda civic Forums & post your problems & they'll immediately will help you. Enter the code at this site: http://www.iequus.com/3100.asp?CatShort=CodeDef It says it is a random/multiple cylinder misfire...... So mostly will not happen again. Then do these procedures to erase & rest it; Dis- connects the negative battery's cable; While the ignition switch in the ON position ?Don?t run the engine" So, for 10 - 15 minutes only. Reconnect the negative cable. Try it, & let me know if I add any benefits to you. I hope I add some thing valuable to you. Regards; MAR; soer2@yahoo.com

Posted on Nov 06, 2009

  • 1 Answer

SOURCE: honda civic code p1399

I had the same issue and the same code along with the misfire codes too. I replaced the spark plugs and I have had great success. Change the plugs, wires, and maybe the distributor cap :)

Posted on Dec 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

PROBLEM CODES;P0301,P0302,P0304,P0300,P1399,07-02,09-02,07-03


po301 to po304 are miss fire codes, 301 cylinder 1, 302 cylinder 2 Etc, p1399 means that this must be a Honda manufactured vehicle. All are misfire codes, Could be plugs, wires, coils. ETC, Check and you will find the problem. God-Bless!

May 23, 2015 | Cars & Trucks

1 Answer

Check engine light on and was reading a p0505 code drove to the store and engine like started blinking got home hooked the code reader and now have another code of p0309 and p1399


Code 505 is a problem with the idle air control valve.
Code 309 is noting a cylinder 9 missfire on engines with 10 cylinders which would not include yours. That may be a fluke or not the right number.
Code p1399 is brand specific and for Honda it usually means random miss.
The code 505 could be the idle control valve or a vac leak. The computer can not control idle speed by using the valve.
The miss codes mean the cylinders are not producing power when they should be. Which may or may not be ignition. It could also be fuel or mechanical problems.
If you have not replaced the plugs and done the usual maintenance stuff in the past year or two, I would start with the basics.
Be sure and look at the inside of the dist cap and rotor.

Jan 18, 2013 | 1998 Honda Civic

1 Answer

1997 accord dtc p1399,p0303


the po303 is cylinder 3 misfire and other code could be trans code or abs or body code i know yhe one for sure

Nov 11, 2012 | 1999 Honda Civic

1 Answer

I have a 99 Honda civic SI with p1399 code I've


CHECK THE DISTRIBUTOR AND DISTRIBUTOR CAP FOR CORROSION PRETTY COMMON ON THOSE HONDAS.

Jun 29, 2012 | Cars & Trucks

2 Answers

P0302,P0303,P0304;P0300 and P1399 found by the code reader on my honda CRV 2001 model.what those are means?


From www.hondasuv.com:

 

The P1399 random misfire along with one or more of these codes: P0301, P0302, P0303, P0304 -- indicates a problem with the valves. The B20 engines in the 1997-2001 CR-Vs are known to have problems with valves tightening and then 'burning'.

So the first question is when was the last time you adjusted the valves? If you don't know or never have, then have them adjusted. Soon...

Jan 04, 2011 | 2001 Honda CR-V

2 Answers

I have a honda civic lx 1998 I need to know what the troubleshooting code P1399 means? The engine number is D16Y7


Get your self a EGR valve it is sticking or the EGR port is blocked i can tell you how to test it you have a volt meter but i am 100% THAT WHAT IT IS
Code P1399 is a pending misfire code.
HOW TO TEST

1. Check EGR position sensor voltage on the White/Black wire at idle - look for 1.1 - 1.2 volts with the EGR valve closed. If the EGR position sensor voltage is higher than 1.2 volts, the EGR valve is stuck open.

2. Can unplug the EGR valve and apply power to the terminal on the EGR valve that the Pink wire would normally go to and ground the terminal on the EGR valve that the Black wire would normally go to and see if the engine stalls at warm idle.

Oct 14, 2009 | 1998 Honda Civic

1 Answer

Trouble code P0325 and P1444


Nissan code:
P1444 Canister Purge Volume Control Solenoid Valve

Generic OBD II code:
DTC Codes - P0300-P0399 – Ignition System or Misfire
P0325 Knock Sensor 1 Circuit Malfunction (Bank 1 or Single Sensor)

I hopes this helps you.
Replace or fix these two items should do the trick.
It's hard to diagnose a car over a computer.

Mar 23, 2009 | 1998 Nissan Altima

Not finding what you are looking for?
1997 Honda Prelude Logo

Related Topics:

240 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...