Question about 1993 Cadillac Fleetwood

1 Answer

Brake lights won't go off. Mechanic replaced a modular and a lot of electrical circuits. Nothing has worked.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,669 Answers

You have tried replacing the brake light switch i would assume right? They stay on with the brake light switch unplugged?

Posted on May 13, 2010

  • mdavis_cgc May 13, 2010

    I'm not too sure. It's my grandmother's car and she has taken it to this mechanic at least 5 times. I was messing with it last night and it seems like there is a short connected to the brake. I kept tapping the brake pedal and eventually the lights went off. Where is the brake light switch? Is it easy to replace? I can try and do it myself. Thanks for the insight!

  • Clint Smock
    Clint Smock May 14, 2010

    It is on the bracket right above the pedal. It should have a white wire and a orange wire going to it. I'm sure of the white wire but I think the other one is orange on this model. Unplug the switch and see if the lights go out.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

REPLACED BRAKE LIGHT SWITCH NO BRAKE LIGHTS OR RUNNING LIGHTS 3B/LIGHT WORKS


Don't listen to it could be combination switch , you could replace that an still not have the lights work . Do the center high mount brake lights work or none of the brake lights ? The thing to do is test B+ voltage an ground for those circuits , we test , not guess ! Go on youtube a watch videos on basic automotive electrical circuits trouble shooting , how to read a wiring diagram , voltage drop testing . Then go to http://bbbind.com/free_tsb.html free wiring diagrams , see what all is involved in those circuits ! Electric Testing Techniques You Need to Know If you don't know or understand what I'm telling you, you need to take your vehicle to qualified repair shop . Do go by I was told it was this or that . There are a lot of problems that can cause lights to not work .

Jun 07, 2016 | 2004 Cadillac Escalade

3 Answers

Why do the brake lights stay on after the brake switch is disconnected?


be sure that brake pedal is all the way up even if you have to pull it up or thers a wire shorted

Oct 15, 2014 | Cars & Trucks

1 Answer

My brake light and battery lights came on and stay on.


Oops!There seems to be an electrical problem... Ask someone to check it for you (engineer, mechanic, whoever knows how to do it...). Do not leave it as it is! It can be dangerous!

Jan 26, 2014 | Cars & Trucks

1 Answer

Brake light not working on one side only


A mechanic would check the socket for power on each circuit and the ground with a test light or meter.

Apr 03, 2013 | 2002 Chrysler Town & Country

3 Answers

2000 chevy venture brake lights won't work


Try the sensor that is triggered when you press the break to turn the lights on. Also check fuses and make sure your wiring is all good, Good grounds..

Mar 31, 2013 | 2003 Chevrolet Venture Passanger

2 Answers

1974 Super Beetle brake and tail lights won't work


pull your brake light assmb out and check your connections including ground

Dec 29, 2012 | Volkswagen Beetle Cars & Trucks

1 Answer

Running lights work but no rear turn signals or brake lights


All three circuits go thru the turn signal switch.
A mechanic would check for voltage there next.

Jul 11, 2012 | Chevrolet Silverado 1500 Cars & Trucks

2 Answers

My 1997 rodeo brake lights won't work


Have you replace or tested the brake light switch at the brake pedal arm under the dash? If not do so, it is likley the problem.

Jan 25, 2012 | 1997 Isuzu Rodeo

1 Answer

Code 48 appears with the 93 Allante. It says EBTCM modular problem or a Brake pressure modulator, Information center on car says Traction disabled, abs disabled and low brake fluid The red brake light...


Before replacing any expensive parts replace the brake fluid sensor. disconnect the electrical connector. squeeze the two tabs together and push it out slide the new one in and connect the electrical connector, then road test it. This sensor is on the bottom of the brake fluid reservior, you DO NOT have to drain the fluid out

Sep 11, 2010 | 1993 Cadillac Allante

1 Answer

When brakes applied brake light won,t work


If it just the brake light switch, should be under a $100.00.

Jul 21, 2010 | 1994 Nissan Altima

Not finding what you are looking for?
1993 Cadillac Fleetwood Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

75842 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...