Question about 2000 Chrysler Concorde

1 Answer

My engine light stays on, I had my care worked on about 3 wks ago and the light never came on now it's on. Took it to Auto Zone and it reads cyclinder misfiring??? What's up with that?? They replace the spark plugs and wires or vacuum problem, so what could it be??? It's not running bad and don't seem to skip.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Chrysler Master
  • 6,927 Answers

Miss fire can come from bad fuel,or a injector restriction,add a additive called lucas fuel treatment,and use as less fuel as possible ,to make it more consentrated.Also use a water dryer,one bottle,called heet,in the yellow bottle,it is the best.

Posted on May 13, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 1997 ford thunderbird lx check engine light flashed on and off then it stayed on

If a problem happens 3 times in a row the engine light will come on. Then the code must be read in order to find out what needs to be fixed. Auto Zone will read the code for you at no charge, if you don't have a reader.

May 27, 2014 | 1997 Ford Thunderbird LX

1 Answer

Check engine light on

erase code again , then disconnect battery for a few minutes, reconnect, see if code comes back. hopefully this resets computer. you don\'t have a reset button on steering wheel do you ? replace your fuel filter, if you haven\'t lately. maybe that will help.

Feb 20, 2013 | Dodge Stratus Cars & Trucks

1 Answer

2003 Chev C1500 truck Check Engine light came on.. Took to Auto Zone to read code and said coolent. I did have flush and new antifreeze put in at Sears about 1mth ago. Auto zone said not to worry, but...

When the service engine soon light a yellow light (Also called the check engine light or engine management light) is turned on this is to alert you to the fact that Powertrain Control Module (computer) has detected a failure somewhere in the systems it controls you may not feel any difference in the way the engine runs, this can be the transmission or the engine or emission system, there are fault codes set in the modules memory for these faults. What needs to happen now is to have the powertrain control module scanned with a special tool called an OBD2 electronic engine control scanner or a OBD2 code reader. Once the code(s) are read then you must perform the diagnostics for each code and make the appropriate repairs based on the findings of the diagnosis that was performed, this is called doing "Pinpoint" testing.

Dec 20, 2012 | Cars & Trucks

3 Answers

Check engine light is on took it to auto zone they said it was my egr valve and i replaced it and check engine light still on........ is it any other sensor that, the egr could have trigger

The check engine light will not go out on its own until usually after 20 or so starts.You need to back to Auto zone and have them hook up the analyzer again and clear the codes (they will do this for free). If the problem was your EGR valve, the light will then go out.

May 04, 2011 | 2002 Suzuki XL-7

1 Answer

Engine light came on approx. 1.5 wks ago and stays on after I start the engine. What's most likely to cause this? Is there anything I can try before taking it to a mechanic?

yes, go to a local auto parts store and have them test it. most do it for free. they will tell you whats causing it.

Apr 12, 2011 | 2007 Kia Rio5

1 Answer

The car keeps jumping gears sometimes and air gets in the pistons. service engine light only comes on randomly. i went to autozone for the code scanning and nothing showed up twice. took it to mechanic...

auto zone can only help you when the check engine light is "on" SUGGEST THAT YOU HAVE IT CODE READ AT AUTO ZONE THE NEXT TIME THE LIGHTS ON,WHEN IT DOES COME ON,LEAVE IT RUNNING THEN when you have someone with you,leave the car running,go inside auto zone and get them to come out and code read it while the lights on.the only way they can read it is if the check engine light is on. i understand that you have a new motor, you may have a bad idle control sensor. that jumps out at me. the silver canister on top of your engine that has only 2 screws holding it to the engine and has an electrical plug in. does the engine die after you start it sometimes? when you're at a light does it not want to take fuel when you press on the gas pedal? does the engine die sometimes for no apparent reason when it"s setting still? if any of these signs are correct,then a bad idle control sensor is suspect.if not that,then you may have a clogging or clogged fuel injector.if you suspect that,then i suggest adding lucas fuel injector cleaner to your gas tank. this stuff works great for unclogging fuel can find it for around $5.00 at auto zone,just add it to your fuel the engine and you will see a difference after the 1st 15 miles. no more missing or sputtering at stop lights or stop signs. thank you for choosing

Mar 24, 2011 | Saturn L300 Cars & Trucks

1 Answer

Almost 2 wks ago I left the windows open and it downpoured and the dashboard was wet. Then after the headlights and interior lights would stay on after I shut the car off but wld after a cple of mins shut...

Well, now you know why cars in floods don't sell too well or are undesireable.

The body control module probably got shorted out and is malfunctioning, or the relays are malfunctioning.

Anyway, take it to an auto electric shop to have it thoroughly checked out, because it's probably still drying out.

Good luck on this one.

Jun 25, 2010 | 2000 Dodge Caravan

1 Answer

Service Engine Soon Light came on took it to Auto Zone came up with gas cap, purchase another that was about four days ago, when I purchased gas cap the guy in Auto Zone said the light would go out by...

The petrol filler cap??? their having a laugh with you ,this light is service interval light thrown up by the speedo reading .There is most likely a procedure for putting the light out by say holding the footbrake on ,turning the sidelights on then holding the trip meter reset button in and then turn the ignition on.But i dont have an all data book covering the american build models.As for your fiscal attributes bruv,,,,,,,,,,,,,,,,,,,,,,,,,,,well two teenagers ,and now a young one ?? `had a vascetomy done many moons ago,stops accidents ??? know what i mean

Oct 23, 2009 | 2004 Chevrolet Blazer

1 Answer

Transmission Jerking

have car scanned places like auto zone and advanced auto do it for free sensor should show up as pending or a fault code

Oct 06, 2009 | 2006 Pontiac G6

1 Answer

Check engine light

auto zone will read the code for free and find the problem.

Nov 30, 2008 | 1999 Dodge Dakota

Not finding what you are looking for?
2000 Chrysler Concorde Logo

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8589 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides