Question about 1984 Ford F 150

3 Answers

My distributor isnt getting any fire - 1984 Ford F 150

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

If it has the little grey retangle on the side of the distributor that is the ignition module. chances are that is your problem. u need a special tool to do it. but both are cheap and readily available at your local parts house. it is either that or the coil is bad. autozone can test both.

Posted on May 12, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

We have no fire we replaced coil rotor and cap and modgular. What else could it be?? i dont thint distributor was all the way down when started herd a crunk starting to wonder if thats it now. Have power to coil

Posted on Jul 30, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 93 Answers

Check the coil or a connection from the coil to the distributor

Posted on May 12, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

89 cheavy isnt getting fire all of a sudden

take distributor off and check the rotor underneath.

Dec 22, 2012 | 1985 Chevrolet S-10

1 Answer

Why isnt my engin firing in cylinder 5 and 2

This is a guess from general experience (I'm 55): You have a dirty distributor and/or worn/ damaged distributor cap.

Mar 25, 2012 | 2000 Buick Park Avenue

1 Answer

Distributor not putting out fire

Dreaded main relay failure will cut power to fuel and distributor.

Feb 18, 2012 | 1993 Honda Accord

1 Answer

Its not firing weve replaced the relay switch the distributor and coil and it still isnt firing

You say Distributor if this actually has a distributor and not a coil pack remove the distributor cap and watch the rotor as you crank the motor. If the rotor isn't spinning your timing belt is broken, if it is, check the relay in the power distribution box under the hood as well as the fuse there and in the interior fuse panel to make sure they are all functioning properly.

Sep 17, 2011 | 1995 Toyota Corolla

1 Answer

My stratus isnt geting power to the distibuter so it wont fir

stratus in the USA don't have distributor it has a crankshaft position sensor that fires a coil unless this auto is a European or some other country that still uses carburetor and distributor.

Jan 23, 2011 | 2000 Dodge Stratus

1 Answer

My truck wont fire I have replaced the distributor cap rotor in distributor and ignition control switch in the distributor what know replace the computer it ran fine last night but it wont start today

first you need to test circuits see where the fire is going in and coming out when you find the spot that you have no firing coming out theres your demon replace it also check your fuse if it didnt show signs of a problem befor you parked it make sure you ignition relay or fuse isnt blown also check your ignition control moule and pick up some call them stators

Sep 29, 2010 | 1989 GMC K2500

1 Answer

We have no fire coming out of the distributor, we have changed rotor buttons and distributors we have also changed the computer. Can you please advise were the ground is on the thermostat housing?

The ground for the distributor is actually on the backside of block under intake kinda in the harness it bolts directly to block and holds harness up. Make sure the distributor is turning when you spin it over if it isnt the timing belt have broke

Aug 05, 2009 | 1991 Honda Accord

1 Answer

03 mercury sable isnt getting fire to the spark plug.

you probably need a new distributor. You should have it tested.

Apr 27, 2009 | Mercury Sable Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers


Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides