Question about 1994 Ford Crown Victoria

1 Answer

1994 ford crown vic front pass. side power window regulator...

I have a 1994 ford crown vic lx and im trying to change the front pass. side power window regulator out, but looks like the window is riveted to the regulator but not sure?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,353 Answers

Yes it is. They will need to be drilled out. Thats the best way, some people try to put bolts on, but I dont advise it.

Posted on May 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to take rear inside door panel off 94 ford crown vic lx


michael_cass_313.jpg
Hope this helps you ?? ps. would have made picture bigger, but this web page won't allow it....

Jul 14, 2011 | 1994 Ford Crown Victoria

1 Answer

1994 Ford Crown Victoria power front window will not go up or down but I can still hear the motor


if it sounds kind of grinding the regulator is bad, it is cable driven and
whenit goes bad the window wont move but the motor still runs

Aug 06, 2010 | 1994 Ford Crown Victoria

1 Answer

Cylinder position 4.6 crown vic 2000


i hope this is wut u need! look at the front of the car! pass side front to back 1357 driver side front to back 2468

Jan 06, 2010 | 2000 Ford Crown Victoria

1 Answer

2003 CROWN VIC HAS NO SPARK AND NO POWER TO FUEL PUMP CHECKED RELAYS AND FUSES CHANGED CRANK AND CAM SESOR LOOKED FOR BAD GROUND AND BROKEN WIRES AND HELP PLEASE


DID YOU CHECK THE FUEL PUMP SHUTOFF SAFETY SWITCH ON THE LH/DRIVERS SIDE IN THE TRUNK & MAKE SURE IT IS DOWN ,& EVEN IF IT IS SOMETIMES YOU CAN TAKE SOMETHING & PUSH IT UP & THEN PUSH IT BACK DOWN & IT WILL CRANK,& BELOW THAT SWITCH IN THE TRUNK IS A FUEL PUMP DRIVER MODULE ,IT MAY BE BAD,THOSE ARE A COUPLE OF THINGS THAT HAVE WORKED FOR ME ,& THATS PRETTY MUCH ALL I DO IS WORK ON FORDS, & LX CROWN VICS & P71 POLICE CROWN VICS WHERE I AM WORKING, HOPE THAT IT MIGHT HELP YOU FIX IT. SEAN

Nov 02, 2009 | 2003 Ford Crown Victoria

2 Answers

I have a 94 vic lx. Cruise control has worked fine. All of a sudden it stopped working, no cruise light on dash, fuses are good.


since the fuses are ok i would try the servo this is the piece that looks like two face. it has a solid back on one side and a rubber front on the other it should be around your master cylinder. check to make sure that the wires arent frayed or have come loose.

Nov 01, 2009 | 1994 Ford Crown Victoria

1 Answer

1994 crown vic power door locs continuously cycle and one power window will not operate. Is this a wiring short?


Some what! the door locks are not easy.it could be the switch and it can also be one of the door lock acturators is stuck in one direction,they do this often on ford.
The window is either the switch or the motor is gone,sometime the motor can be good and the regulator goes bad,the cable assembly that the motor rides with.

Jul 28, 2009 | 1994 Ford Crown Victoria

1 Answer

Knocking noise from rear passe ger side 2003


Your axle bearing is more than likely shot. The right side goes out first for some reason. Fairly inexpensive if you can do it yourself.

Jul 09, 2009 | 2003 Ford Crown Victoria

1 Answer

1994 crown vic where is engine computer located im getting parts off another car what other parts be good to save


Look for a wiring harness on the passenger side of the car that leads to the right side of the dashboard - up underneath it - it should lead you to a rectangular aluminum box. That's your computer.

Jun 12, 2009 | 1994 Ford Crown Victoria

3 Answers

94 crown vic driver power window does not work can


The window regulator can be broke. Its made of plastic and they break often.

May 03, 2009 | 1994 Ford Crown Victoria

Not finding what you are looking for?
1994 Ford Crown Victoria Logo

Related Topics:

333 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...