Question about 1996 Jeep Grand Cherokee

2 Answers

What is the firing order for a grand cherokee laredo. I change the distributor for sgrand cherokee laredo jeep. I lined up tdc, had the rotor turned to number 1, but it is still missing.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 2,984 Answers

You didn't post your engine size so please choose the apprpriate diagram:



what is the firing order for a grand cherokee - 148dbd9.gif

1989-98 2.5L Engine firing order: 1-3-4-2 Distributor rotation: Clockwise



cc5a81b.gif


2.8L Engine firing order: 1-2-3-4-5-6 Distributor rotation: Clockwiwhat is the firing order for a grand cherokee - 427e129.gifbr />

427e129.gif

4.0L Engine firing what is the firing order for a grand cherokee - 35fbd17.gif3-6-2-4 Distributor rotation: Clockwise



35fbd17.gif

5.2L and 5.9L Engine firing order: 1-8-4-3-6-5-7-2 Distributor rotation: Clockwise

Posted on May 12, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,353 Answers

V8??? 1 8 4 3 6 5 7 2. 6Cyl 1 5 3 6 2 4

Posted on May 12, 2010

  • Thomas Smith Oct 06, 2011

    timming check your timming marks on timming chain cover with timming light, some use magnetic pickup? i am not familliar with the latter
    the purpose is to make sure that your inital timming is set properly
    if to high,or to low, it can cause a miss , rough idle,and stalling,or even back fire through exaust , or intake

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2005 Jeep Grand Cherokee Laredo it misfires when idleing I changed the plugs yesterday it didn't start doing that until I changed the plugs


Carefully check your routing and make sure that all spark plug wires are attached to the correct spark plugs otherwise your firing order will be mixed up and cause the issue you are having. Also make sure that the wires are firmly seated on the coil packs or distributor, whichever is on your vehicle.

May 28, 2015 | 2005 Jeep Grand Cherokee Laredo

1 Answer

My jeep grand cherokee 94 mOdel will turn over but


have you check fuel pressure and timing marks of crank at TDC #1 and location of rotor pointing when on cyl #1, does it point to were #1 is on the distributer cap.

Aug 31, 2014 | Cars & Trucks

1 Answer

1996 jeep Gc laredo 4.0 should the dist rotor point to #1 cyl at tdc


at tdc your rotor has to be pointed at five o' clock for the engine to start. first position the oil pump slot at 5 and 11 o"clock and when the distributor seats the rotor must point at 5 o clock. it will not be centered on the #1 cylinder position, but a little before.

Mar 04, 2013 | 1996 Jeep Grand Cherokee

2 Answers

Jeep 4.0 firing order


1999 Jeep Cherokee 4WD 4.0 liter L6 VIN "S"

71cf96f.gif

Hope this helps (remember rated this).

Aug 09, 2010 | 1998 Jeep Cherokee

1 Answer

Need firing order for 1998 Jeep Cherokee gand


For the 1998 Jeep Grand Cherokee Laredo:
I do not know if you have the 4.0L In-Line 6-Cylinder, the 5.2L V8, or the 5.9L V8; however I have included ALL below:

For the 4.0L In-Line 6-Cylinder:
Firing Order:
1-5-3-6-2-4
Cylinders:
(back)
...6
...5
...4
...3
...2
...1
(front)

Distributor:
....(back)
.....5....3..(+)-screw
1.............6
(+).4....2

For the 5.2L V8: AND 5.9L V8:
Firing Order:
1-8-4-3-6-5-7-2
Cylinders:
.......(back).......
|..8..|.........|..7..|
|..6..|.........|..5..|
|..4..|.........|..3..|
|..2..|.........|..1..|
.......(front)
Distributor:
.....(back)
.......3
..4.........6

8.............5
..1.........7
.......2
......(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

May 28, 2010 | 1998 Jeep Grand Cherokee

1 Answer

1996 Jeep Grand Cherokee 4.0 4 wd - changed wires, distributor cap and rotor - now it will not start? Did verify the firing and that all were plugged in correctly.


If the wires are in the correct order, also make sure that you used the correct starting point, otherwise the base timing can be off by as much as 60 degrees. Turn the engine till the crank damper timing mark is pointing to 0 or tdc on the timing scale. If the rotor is pointing towards the engine, turn one more time. #1 is roughly when the rotor is pointing towards the passenger headlamp. Order is in the direction the rotor turns when cranking. If the engine was running with no problems before the change, only other thing could be that you inadvertently unplugged something or the security system armed. Other possibility is that if you did the change due to a running problem, whatever was causing that finally failed.
If when you remove the cap again you find that the rotor is damaged, check the dist shaft for side play.
Are you getting spark?

May 25, 2010 | 1996 Jeep Grand Cherokee

1 Answer

I have a 1991 jeep cherokee and i just changed the


Turn the engine to TDC, so the line on the crankshaft balancer lines up with the zero. (Number one cylinder all the way up, and it should be blowing air with your finger in the spark plug hole on it's way up. This is TDC) Note, make sure you turn it the same direction as when it is running!!!! (Turn it with a socket on the end of the crankshaft, clockwise facing the front of the vehicle) Now with the distributor cap off, the rotor should be pointed at where the number one spark plug wire goes into the cap.

Apr 29, 2010 | 1991 Jeep Cherokee Limited

1 Answer

1996 Jeep Grand Cherokee Laredo won't fire. Was


check the cam sensor and crank sensor, also is the distributor turning,possible distributor gear pin broke

Nov 08, 2009 | 1996 Jeep Grand Cherokee

1 Answer

1993 jeep grand cherokee laredo 4.0 no spark


First I would change the plugs, wires, distributor, and rotor button next I would make sure the firing order is correct then have timing checked if all check out have the cylinders tested.I hope this get your Jeep up and running. Please Rate Me . And you can always ask me wutxtye0rjd9d9ekmodqt1eoxkvn9hr9qjz1l3dabggyud7sdgr36czsrfxqenadhnijx9nfayi+sz1sug0aaaaasuvork5cyii=

Apr 26, 2009 | 1993 Jeep Grand Cherokee

2 Answers

Distributor cap wiring diagram


Check this info... Wiring Diagrams with the graphic firing order for 6 and 8 cilinders.

Good luck!!!

Apr 22, 2009 | 1993 Jeep Grand Cherokee

Not finding what you are looking for?
1996 Jeep Grand Cherokee Logo

1,861 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

77194 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...