Question about 2002 Ford F150 Regular Cab

1 Answer

2002 ford f150 4.2 is not starting has feul pressure ,spark on wires yet wont start

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 5,763 Answers

I would start off by scanning computer for codes,thses codes can help in the diagnoses, the next thing if there are no codes is to check for injector pulse at the injector.

Posted on May 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 f250 5.4l would not start. changed feul pump and filter still would not start. 20 mni later started. was cleaning engine while running 10 15 min later died wont start.


Check fuel pressure at the injector rail. Could be your fuel pump relay is cutting out. If fuel pressure is good, check for sparks at the plug wires. Read the link below for more info.
Do It Yourself Diagnosis and Repair

Jul 26, 2017 | Cars & Trucks

2 Answers

98 ford explorer replaced egnition. Now it wont start. Starting fluid does turn it over. But isn't getting feul


out of fueL, bad fuel , old fuel>?

replace what exactly , ignition parts t are many.
key switch.?
Igniton coil(or coils, or cops or coil packs)
Distributor.
spark wire, (not replaced 1 by 1 = fail..)
ok , the PCM monitors spark and that fails, (even if spark is good)
it will cut fuel. so what did you touch>?

i use a noid light, if pass I check fuel pressure
if noid fails, i find out why PCM is cutting fuel.
check fuses 1st. always. for ever. and ever

Jul 05, 2014 | Cars & Trucks

1 Answer

2002 ford zx2. I replaced the timing belt and the car is timed perfect but still wont start. Any suggestions?


Check for spark, if no spark check your crank position sensor, cam position sensor, plug wires, ignition coil, plugs properly gapped.

If you have good spark, check your fuel pressure, if good check your coolant temperature sensor.

Double check that you CORRECTLY aligned the marks on the timing belt, double overhead cam engines are more involved and require a specific procedure.

Oct 14, 2013 | Ford ZX2 Cars & Trucks

1 Answer

Why wont my car start


check you have feul, feul pressure and spark

Jul 01, 2013 | Cars & Trucks

1 Answer

The van cranks but wont start it got hot and shut off


dirty injectors / feul filters check air filter

Jan 12, 2013 | 2002 Kia Sedona

3 Answers

1997 ford f-150 starts then backfires thru intake and then shuts off.


most likely the feul pump. test the feul pressure with a gauge. look of ther little metal feul line on the intale manifold. tst pressure. have freind listen at the rear of the truck for the pump prime. key on only. then start the truck, friend should hear pump running. could also need a timming chain but pump is more tlikely

Dec 27, 2009 | Ford F-150 Cars & Trucks

1 Answer

I have a 2001 camaro with a 3800 v6 it cranks but wont start. no feul and the injectors are not firing. i can jump the feul pump relay and get feul pressure but the injectors will not fire.


The crank sensor is what pulses the ijectors,and makes the spark,so I would start at the crank sensor.Let me know how you come out.Check for any blown fuses also.Ecm fuse would cause this,but it may be called anything ,so check all fuses.

Sep 10, 2009 | 2001 Chevrolet Camaro

1 Answer

My 90 model prelude runs fine for about 10 to 15 mins then cuts out and wont restart but if you leave it for around 10 mins will start again. if i turn it off again same problem it wont start. it seems to...


ignition modual . net time it dies take one of the pluge wires off and check for spark by sitting it close to a ground and crank the engin . if no spark it very well could be a control mod

Jun 04, 2009 | 1990 Honda Prelude

1 Answer

Car will turn over but wont start.


Are you getting spark at plugs? Module on side of distributor was a pretty common thing to go in those, if you have no spark.

Jan 10, 2009 | 1988 Ford Taurus

Not finding what you are looking for?
2002 Ford F150 Regular Cab Logo

Related Topics:

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...