Question about 1993 Dodge Caravan

2 Answers

How to remove the cover under the steering colum?

How to remove the plastic underneath the steering collun. What type of screw driver should I use?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 2,984 Answers

There is two pieces to the lower column plastic...3 screws for the piece closest to the steering wheel and two screws on the lower piece....a long phillips screwdriver (cross-tip) will remove them.




How to remove the cover under the steering colum? - b1821b3.gif

Posted on May 12, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 5,763 Answers

If i remember correctly it a trox head screw, so a trox screw driver, its a size t15 or t20,

Posted on May 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mazda Tribute removal of steering colume cover?


In most vehicles there's 4 to 6 screws normally phillips head under the wheel in the cover

Sep 30, 2015 | 2001 Mazda Tribute

1 Answer

How to remove steering column cover


hi most mercs of this age are mostley the same where the steering wheel is look underneath that where your peddles are that is a large panel with around 7 to 8 screws keeping it in place remove this pannel when this is removed you should be able to see more screws keeping the steering colum plastic in place you may also need t remove the steering wheel first disconect battery as the srs light will come on and will need reseting if not behind the wheel there are 2 screw holes which are small star keys this removes the air bag once air bag is removed the steering wheel not will be there hope this helps

Aug 30, 2014 | 2000 Mercedes-Benz SLK

1 Answer

My turn signals don't work on a 2000 ford


If you have tilt steering,after a while wires in colum tend to cut in half when tilting up and down. Not to complicated to fix. Take apart colum by removing the three screws underneath,philips(star screwdriver) then unscrew the handle that tilts the strring,you will see a flat part to the rod,,,then remove plastic that suronds the colum,all clip ons.Take a pointy tool or nail will do,put the key in the ignition,you will see a hole underneath the key cylinder,push in and the whole baril with key will come out.Now you can remove both plastics covering colum and the problem should be odvious,,,,,Be patient and enjoy your fix.

Sep 09, 2011 | 2000 Ford Expedition

1 Answer

I have to replace my ignition switch, trying to see how exactly to do it. also whats the best way and safest way putting on wheels. how long of lug bolts do i need for aftermarket wheels do i need spacers...


Remove the steering wheel center portion

if it has a driver airbag you will have to loosen the screws around the back of the steering wheel

if not the hooter potion should just clip off

once off remove the center bolt of the steering (unplug the airbag plugs if applicable)

mark where the steering wheel was located on the shaft so that you dont put it back scew.

remove the steering colum covers that go around the indicator and wiper switches.(there are usually a few scres that go in from underneath

Remove and unplug the wiper and indicator switches (usually just fastens with three very small screw from the front.

now you will see the ignition housing.

At the top side of the steering colum you will see a plate that pulles the ignition housing against the steering colum.

this plate is fastened with "break off bolts" the heads of the bolts break off once fastened as to prevent thieves loosening the ignition lock.

to loosen these screws use a centre punch and a hammer and work them in an anti clockwise direction.

Unplug the ignition switch at the back of the ignition.

please note that if the vehicle has airbags you should not switch on the ignition whilst the air bag is unplugged, this will activate the airbag fault lamp on the instrument cluster.

Install in reverse order.

Feb 15, 2011 | 1998 Volkswagen Jetta

2 Answers

My father is outside now trying to pop out the ignition lock to my 1996 Mazda B2300 to replace it. And a piece of it broke off inside of the terminal that the ignition goes into. What and how do we need to...


this model the colum has a split plastic shell that come apart screws are in some holes philups screwdriver or torx driver#15 plastic will come apart and u can access the ingnition switch

Jul 01, 2009 | Mazda B2300 Cars & Trucks

1 Answer

Want to remove the ignition lock cylinder since a broken key is stuck inside.


get a phillipshead un do about 4 screws from underneath plastic cover which hides steering colume. remove cover you will see white plug on the left hand side of ignition barrel disconect.then right hand side there will be acable disconect.now get a small chissel and anti clockwise tap bolts which have no heads on them that are on top of steering colume when they are alittle bit lose use plyers its easier pull bolts out clamp will then come of and then you can pull whole ignition of. now there is 2 brass pins which hold barrel in ignition up near the key end remove and barrel will come out but it might be easier to take whole ignition to locksmith and get them to do it and get new key for around 30 bucks i did a mates about couple months ago seeya orangepeel.

May 18, 2009 | 1995 Mazda 626

1 Answer

Headlights not working even after bulbs and fuses replaced


Replace your headlight switch. You need torx bits, a steering wheel puller, and bolts to perform the repair.

Disconnect your negative battery cable and wait at least 1 minute before going any further (this insures your airbags are disabled if your vehicle has them).

Remove the plastic covers that cover the steering colum. If applicable, remove the airbag from the steering wheel; if you don't have a airbag pull the horn switch from the center of the steering wheel. Remove the retaining clip from the center shaft in the steering colum. Remove the bolt that holds the steering wheel, then use a steering wheel puller to remove the steering wheel. Remove the torx screws from the headlight switch, and remove the electrical connectors. Install in reverse.

I hope this information helps you, and I wish you luck on your repair.

Apr 25, 2009 | 1996 Chevrolet Cavalier

1 Answer

I need to replave the key switch in a 1991 cavalier


First disconnect your negative battery cable. Then remove the plastic cover below your steering colum, and the covers that cover your headlight swith, turnsignal switch, ignition, ect. Remove the bolts that hold the steering colum to the dash, and allow it to lay on the drivers seat. Place a towel under the colum (to catch metal shavings), and drill out the two screws that hold the ignition in place.
Install your new ignition in reverse.

Apr 23, 2009 | 1991 Chevrolet Cavalier

2 Answers

2005 Pontiac Aztek the ignition will not unlock I can remove key


sounds like there is a problem somewhere in the linkage.

Mar 05, 2009 | 2001 Pontiac Aztek

2 Answers

Changing turn signal switch 1986 lincoln town car.


shouldn't have to... just remove the cowling surrounding the steering column between the steering wheel and the dash to give you access to the part

Feb 24, 2009 | 1986 Lincoln Town Car

Not finding what you are looking for?
1993 Dodge Caravan Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...