Question about 1997 Nissan Maxima

1 Answer

Does an idle control motor need to be repaired by an certified nissan mechnic?

Posted by on

Ad

1 Answer

No You never have to take a vehicle to a dealer. Not even a brand new one
You can replace the idle control motor yourself,if you know for a fact it needs to be replaced. You may have to go the dealers parts counter for the part.
Any repair shop can work on any make vehicle also. There is nothing that requires you to ever set foot into a dealership for repairs. It is your vehicle to do as you see fit

Posted on May 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Real up and reving in park fast idle in drive


motor revving - CarGurus

www.cargurus.com > Questions > Chrysler > Town & Country

CarGurusDec 28, 2012 - motor revving - Sometimes the motor revves up and the light go dim on... If in park it takes alot of rev. to make the pop sound. ... 1996 chrysler cirrus change a bad fuel injector and now the engine revs ... Used Nissan Quest".

Idle issues... cold runs great... after warms up it hesitates ...

forums.nicoclub.com/idle-issues-cold-runs-great-after-warms-up-it-hesita...
Feb 20, 2009 - TYC 800107P Nissan Altima Replacement Cabin Air Filter ... when i go to park the car and throw it in park it goes up to like about .... If I leave it in drive when the idling starts to hesitate it tends to make the car jump forward.

All Questions and Answers for Nissan Repair - AllExperts.com

en.allexperts.com > Autos > Auto Repair

Jan 13, 2016 | 1996 Nissan Quest

1 Answer

If you are driving the 1998 Oldsmobile Intrigue and it starts to tugg or stall what could it be


Tugg is not a technical term used in the auto repair industry , now stall on the other hand is . When does it do this ? at a idle , any speed etc... Vacuum leaks , tune up problem , low fuel pressure - clogged fuel filter . dirty throttle plate , idle air control motor or plugged air passages ! Several thing's can cause this . Your best bet is take it to a ASE certified repair facility >

Dec 31, 2015 | Oldsmobile Cars & Trucks

1 Answer

How can I disable the abs brakes on a 2006 Nissan maxima


I do not have any first hand experience with the Nissan Maxima but have pulled a 60 amp fuse in the box under the hood on Chevy trucks. Here is what I found on the web which may be helpful to you. First the link and then the text:
http://x.nissanhelp.com/forums/maxima/9112-06-maxima-abs-issue.html

The problem is corrosion in the rear hubs is causing the sensors to be pushed out of alignment with the sensor ring. DO NOT continue to drive the car with this problem. It will burn out the abs controller. That part costs $1300.00. First thing you should do is open the hood of the vehicle and follow the wire for the right front abs sensor. You will see a plug above where the motor mount connects to the passenger inner fender area. Unplug that connector. It will disable the abs system so the pump will stop running.

If you are mechanically inclined you could repair this. The rear hubs need to be removed and cleaned. Also the plastic cap behind the hub needs to be modified. After removing the hub you will be able to remove the plastic cap behind it. You will see a hole in the cap where the sensor goes through it. Cut the top portion of the cap so the hole looks like a U and reinstall it. Clean the corrosion around the bearing mating surfaces and reinstall the rest of the parts. Do this for both rear wheels. Be sure to reconnect the front sensor after the repairs are made. You will need to have the codes cleared after repairing. __________________
Nissan Master certified Technician
Hybrid and GTR certified
EV certified
ASE Master Certified.
Good Luck.

Nov 12, 2014 | 2006 Nissan Maxima

1 Answer

How do you adjust the idle on a '04 Nissan Pathfinder 3.5L V6


The idle is not adjustable, it is computer controlled and no adjustment is provided for. If the idle is to high or to low you have a problem and need the dealer to diagnose and repair it.

Oct 21, 2012 | 2004 Nissan Pathfinder

1 Answer

94 nissan altima won't start and iddle after cleaning IACV valve


An IAC (idle air control) motor is designed to adjust the engine idle RPM speed by opening and closing an air bypass passage inside the throttle body. The cars computer or PCM (powertrain control module) receives information from various sensors and will output signals to adjust the idle air control motor in or out to adjust engine idle speed by controlling engine idle air. An idle air control motor can fail one of two ways, either the motor short circuits and stops working or the motor will develop high resistance and cause the idle air control motor to react slowly, either failure can cause the engine to stall at idle. When a trouble code scan is performed it sometimes won't always detect a failed or weak idle air control motor.

Oct 08, 2012 | Nissan Altima Cars & Trucks

2 Answers

Oil engine light blinks on and off when the engine is idling. What can cause this?


This is an indication of low oil pressure. Either the oil level is too low and you need to add oil to the full line on the dip stick or you have a real oil pressure problem and need to have the problem diagnosed by a certified mechnic.
Let me know if you have any other comments or questions. Thanks.

Jul 05, 2011 | 2006 Mitsubishi Galant

1 Answer

Idling problem on nissan sentra super saloon 1996 b14


idling controller sir . The idle air control motor is just beneath the throttle housing and is controlled by the fuel injection computer. Things that can cause a rough idle and stalling can be vacuum leaks

Jun 24, 2011 | 1996 Nissan Sentra

2 Answers

What is throttle control motor relay circuit for nissan altima 2000 . have a code of p1126


This is the electronic control module to keep the idle of the revs correct it also allows the correct amount of fuel to air mixture the car needs to run. some are called EGR some are ICV idle control valve

Jan 19, 2010 | 2000 Nissan Altima

1 Answer

When ideling, the engine races up and down without touching the accelerator. when driving, the engine stalls while at a stand still and in gear.


Replace your IAC motor. This is the "idle air control"motor. This control the amount of air needed to keep the vehicles idle stable.

Oct 16, 2009 | 1995 Nissan Maxima

4 Answers

I have a 2000 nissan maxima and the problem that i


Idle air control valves short out all the time on these models. You can ohm the motor to check it, but the down side to a shorted iac valve is that it shorts out the ecm if not repaired quickly. when the valve shorts, 12 volts is supplied directly to the ecm and burns the circuit board. The other option is the air flow meter, this is also a very common problem but typically a p0171/p0174 would be stored in self diag.

Jun 14, 2009 | 2000 Nissan Maxima

Not finding what you are looking for?
1997 Nissan Maxima Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...