Question about 2001 GMC Yukon XL

1 Answer

Flat tire how do I change a flat tire?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 72 Answers

Your owners manual is a valuable source of information, but if you do not have it here is what you do: the vehicle should be on a flat hard surface then you need to locate your jack and lug wrench , with the vehicle still on the groung loosen each lug nut about one turn then make sure that your emergency break is on, place the jack under the vehicle in an appropreate spot to raise the wheel off the groung, once the wheel is off the ground you can remove the lug nuts and pull the wheel off. Then you can put the spare tire on and replace the lug nuts tighten them in a criss cross patern as tight as you can get them then lower the vehicle back to the ground and check the lugs again. I hope this helps, good luck !!

Posted on May 12, 2010

  • kenwiesner2 Sep 19, 2010

    I canot believe the RETARDED answers we get on this subect We are not children we can chance a freeking spare tire the asnwer we need regarding changing the tire is GETTING THE G DAMN SPARE ouit from under the car HOW IS THAT DONE the only solution i have so far is to cut the cable with a hack saw WHAT KINDA USLESS INCOPETANT car maufacturer would make it IMPOSABLE to get a spare tire out from its mouts while on the road with a flat DO YOU NEED A FREEKING MILLING MACHINE to cut threw the tire cable ???

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i change back tire


are you sure this is correct category, if not please add more detail and repost in the correct catrgory

Apr 24, 2016 | Cars & Trucks

1 Answer

How many kilometers can you drive with a tubeless tire puncture? will it harm the tire or the wheel? at what speed you can drive with the puncture?


Unless you have those "Run-Flat" tires, the answer is "No further than it takes you to safely get out of traffic. One should NEVER run on a flat if it can be avoided, as the sidewalls of the tire can be damaged very quickly. Even with run-flat tires, you still should change it ASAP, but you have a little longer before damage sets in. Your tubeless tires, completely flat and assuming 30 MPH, will probably start showing serious damage in a block or two. Note that tire sidewall damage can not be repaired.

Nov 27, 2014 | Cars & Trucks

1 Answer

Changing rear flat tire


Find jack follow instructions to raise vehicle after parking brake is on. Remove lug nuts and take wheel with flat tire off. Replace with the spare tire and tighten lug nuts. lower vehicle, put jack , lug wrench and flat tire in vehicle. Drive to a tire repair store and fix the problem.

Dec 11, 2010 | 1996 Dodge Caravan

1 Answer

How do i reset the flat tire light on the dash after i changed the tire?


After you have changed a tire and adjusted your tire pressures you will need to initial the tire pressure monitoring. If your vehicle does not have I-drive then with the iginition in the on position on the left steering wheel stalk, move the rocker switch up and cycle through until you see an icon in the cluster that says initailize. push the button on the end of the stalk inwards toward the steering wheel and hold until you see the icon in the cluster show a check mark. When it shows a check mark your finished.

May 21, 2010 | 2006 BMW 3 Series

2 Answers

Had a flat tire on my GMC Sonoma. Changed the


wheel rim damaged ?? locating pin for wheel not lined up

May 16, 2010 | 1993 Nissan Altima

2 Answers

How to change the flat tire? Can not remove tire off the rim. How i get the nuts off?


While there is road side assistance that can help in times of need. It's imperative that every driver should know about how to replace a flat tyre. After ascertaining that the tyre is flat, you should check the link which will guide you to change the flat tyre with the spare one, have a look
=> DIY 10 easy steps to change flat tyre
=> How to Change Flat Tire

flat tyres-o02zafysdhz3b5opc3ztqqcl-1-0.jpg

Dec 16, 2009 | 1998 Volvo S70

1 Answer

My 2003 wrx has increasing road noise - its getting hard to hear the radio - no grinding, no pops, grunting - just loud and louder humming above 40 mph - even when i put it in neutral. drives fine - could...


i want you to feel all 4 tires, feel for lots of flat spots. feel all the way around them. they might have flat spots on them. this will cause this noise. you neer to rotate your tires at 3,000 miles front to back. this will stop them from cupping out. thats what the tire store calls it. have your tires checked for balance when you rotate them. your tire with flat spots will make a good spare tire. switch the bad one to your spare to see if the noise gets changes

Jul 31, 2009 | Subaru Impreza Cars & Trucks

1 Answer

Flat Tire Monitor


well it could be a slow leak in your tire however it can also be because of the temperature change.I have seen many of times that tpms lights have come on and only 1 tire would be low.It only takes aproximately 3 pounds of difference in tire pressure to set the light on.You may also check your spare tire also they have sensors too.

Apr 22, 2009 | 2004 BMW 5 Series

1 Answer

Flat tire


if you want the cheap route do it yourself. the tools should be in the back of the car under the carpet. or if you dont want the hassle of changing to the spare just buy or borrow an air canister and take it to your nearest tire shop

Nov 01, 2008 | 1994 BMW 3 Series

Not finding what you are looking for?
2001 GMC Yukon XL Logo

232 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...