Question about 2005 Chevrolet Cavalier

1 Answer

Horn not working the relay is good it maybe in the steering colon and wiring

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

1. disconnect your horn and take two wire from the battery and test if it goes on then they are ok ,the step 2

2.connect them back and check by your steering column there should be a pin or a plate check for possible won`t out

3.if still a problem check your wiring for possible open circuit

4. it shoul work if you say you fuses are ok and relays

Posted on May 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Horn dont work but fuse is good


Maybe the horn is faulty ...

Jan 08, 2018 | Cars & Trucks

1 Answer

AFTER SWITCHING RELAYS, HORN CONTINUES TO GO OFF. HOW TO FIX THIS AND FINISH FUSE RELAY WITH CAR?


The relay is powered at all times . In order to sound the horn the ground side of the relay needs to be grounded. It is grounded to the steering column through the horn button . In other words the horn button wire has been grounded to the steering column. Remove the steering wheel (requires a puller) and remove the locking plate, under the lock plate is a disc or cam, something in there is damaged maybe a wire with a spring, or the cam. Good luck.

May 15, 2016 | Cars & Trucks

1 Answer

Location horn relay on 82 cj7


The horn relay primary receives + full time and is actuated by receiving ground (-) from the horn button. Check ground continuity at the horn button (at the steering wheel) to make sure it is working first (most likely culprit). If the horn button is working, check to see if the horn relay is working (second most likely culprit). To test the horn relay, provide chassis or battery ground to the (-) primary terminal of the horn relay and see if the horn honks. If it does, that will tell you that the problem is in the wiring between the steering wheel and the relay, most likely a disconnected wire at the steering column.
The only other components in the system are the fuse for the horn circuit (if you have 12v at the horn relay, that is fine), and the horn itself. My bet is on the horn button pad itself.

May 25, 2014 | Jeep CJ7 Cars & Trucks

1 Answer

Horns not working,original relay 43yrs old !


You hear clicking at horns, and not the relay? Maybe the horns went bad, or maybe you need to check and clean the connections there.
Don\'t know why the cab light went dim, unless the horn wire was trying to make contact?
Yes, TJ, the horn wire should be hot. You are grounding that hot wire when you press for the horn. That hot wire comes from the coil side of the horn relay. Press for horn, it grounds the coil side of relay, and the relay can pass power to the horns.
Now back to the clicking no-honker horns: power gets to the horns when relay is energized, and there has to be a good ground for horns to work. I don\'t know if your horns are case grounded or a wire from horns goes to ground, but check the ground there. If case grounded, pull horns off and clean the ground. Also might try a known good horn. Keep at it, sounds like you are almost there.

Dec 30, 2012 | Cars & Trucks

1 Answer

Buick lesabre 1993 horn wiring diagram


is your horn relay good, swap another relay and see if that works, if not you should check wiring at lower steering column, you could splice wire from relay to wiring harnees at lower steering column inside vehicle

Sep 03, 2012 | Cars & Trucks

1 Answer

Have a 1995 Chevy K2500 pickup. The horn relay switch is good, horn is good but it will no sound when pushing the horn on sterring wheel. What could cause the problem?


your horn button and wiring is ground for the coil side of horn relay, usually. My guess is problem with horn wiring in steering column, maybe a clock-spring issue? I saw two different years listed for your vehicle? It may not make any difference?

Jan 11, 2012 | 1993 Chevrolet C/K 2500

3 Answers

I have a 63 Ford T-Bird that I can't get the horn to work. I have checked the wires and the grounds and they look good. The horns work when I tested them also but when I put the steering column together...


You missed something putting the column back together. IDK the design of the wheel, but if all the wires to the column are good, I'd look at the switch itself in the column. Probably not making contact.

Sep 12, 2010 | Ford Thunderbird Cars & Trucks

2 Answers

Bought an 2004 honda accord and the horn does not work. What is the procedure for repairing this issue?


simple circuit, but can be hard if problem is switch in steering wheel. First check fuse and relay at fuse box. relay should click when horn button on wheel is pushed. If relay doesn't click, either button or relay is bad. If relay clicks, test for voltage at horn. You can use a simple test light available at the auto parts store if you don't have a voltmeter. If there is voltage at the horn, replace horn.
If relay does not click, replace relay to see if that fixes your problem. If new relay doesn't fix, you have a bad switch in the steering wheel or possibly bad wiring. cannot help you with switch as it's different on every car. any questions--let me know.

Sep 06, 2010 | 2004 Honda Accord

1 Answer

Horn not working changed relay fuse is good.


Could be the horn button on the steering wheel, (When you push the button on the steering wheel do you hear the relay click on?). Other than that the horns are bad or the ground wires on them are corroded. (Pull the signal wires off the horns and try to sound them with a wire connected to (+) positive on the battery, be careful, you can get a shock engaging a horn with power.)

May 26, 2010 | 1992 Chevrolet Lumina

4 Answers

Van horn wont work


If your Air Bag light light is aluminated and The Cruise Control does not Work then the Problem is in the "CLOCK SPRING" this Component is Located Under the Steering Wheel and it requires the Steering Wheel to Be Removed.You Must have Complete Instructions on this Procedure or Injury Can Be the result.

Feb 02, 2009 | 1997 Dodge Caravan

Not finding what you are looking for?
2005 Chevrolet Cavalier Logo

204 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...