Question about 1994 Chevrolet Cavalier

1 Answer

How many bolts on the power steering pump 94 cavalier

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,608 Answers

The 2.2 has 2 bolts in front and I believe the is one on the back with a bracket.The 3.1 has 3 bolts in front,behind the pulley.Hope this helps.Good luck.

Posted on May 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Diagram of 1999 Cavalier power steering pump


Chevrolet Cavaliers have power steering installed as standard equipment. The power steering is assisted with hydraulic pressure generated by the power steering pump. The pump circulates the fluid and makes turning the steering wheel very light and responsive to the touch. A sure sign the power steering pump is failing is when steering becomes more laborious; also look for leaking power steering fluid puddled under the car. Removing a power steering pump is not a difficult project and is the first step to repairing the power steering system.
Related Searches:

  1. Serpentine Belt
    • The serpentine belt on the front of the Cavalier's engine provides the power to operate the power steering pump. You have to first remove the belt to free the power steering pump's drive pulley. Underneath the Cavalier is a spring-tensioned pulley keeping the serpentine belt taut. Use a socket wrench to grab the center hex nut on the tension pulley and turn it so the belt becomes loose. Remove the belt from the pulley and then from the other wheels and pulleys on the engine.

    Tubing
    • A tube runs from the pump to the power steering assist mechanism in the Cavalier near the front axle. This hard tube has two fittings on each end for a connection. Use a box-end wrench to disconnect one end of the tube underneath the Cavalier. Be careful because some power steering fluid will leak. Just hold your finger over the hole and set a container underneath the tube and wait for the fluid to drain.

      Once the fluid finishes draining use the box-end wrench to disconnect the tube from the power steering pump. The tube is bent and twists to make its way through the engine bay from the pump to the power steering assist. There's no need to remove it from the bay. Just push it aside.

    Pump
    • The power steering pump is bolted directly onto the engine block. To remove the pump, unscrew the fasteners securing it to the engine. There may or may not be thread lock compound used to seal the bolts onto the engine. If the bolts do not easily turn use some force to break the thread lock. Do not worry about doing this. Breaking thread lock is the only way to get a bolt free. Once the bolts are out, lift the pump out of the engine bay. Again, though, be careful because as you move the pump some remaining power steering fluid may drain from the access port where the tubing was connected. You might want to get a shop towel to hold over the port when moving the pump to avoid a dripping mess.

Jan 12, 2012 | Chevrolet Cavalier Cars & Trucks

3 Answers

Remove power steering pump pulley as to replace belt tension er


you will need a power steering pump pulley removal tool in order to remove pulley and not cause damage. an intsallation tool is needed to reinstall also. if you don't have you can go to auto zone or pep boys and get a loaner from them. hope this helps.

Dec 31, 2010 | 1993 Chevrolet Cavalier

1 Answer

How to change a serpenteen belt on a 94 chevy cavalier


you need a long 3/8 wretched with long handle the tentsioner that is located under the power steering pump has a hole that the wretched fits into you take the tension out and pull the belt out ;




note berry important to see the way the belt is warped o round so u can put it back

Nov 04, 2010 | 1994 Chevrolet Cavalier

2 Answers

Timing Chain Cover, Chain, Sprockets, replacement


2.2L VIN 4 To Remove:
  1. Remove or disconnect the following:
    • Drive belt.
    • Drive belt tensioner.
    • Alternator.
    • Power steering pump. Place the pump aside with the lines attached.
  2. Lift the vehicle.
  3. Remove or disconnect the following:
    • Oil pan.
    • Crankshaft pulley and hub.
    • Timing cover bolts.
    • Timing cover. If necessary, tap with a rubber mallet to loosen the cover.
  4. Clean the mating surfaces.
To Install:
  1. Install or connect the following:
    • Timing cover gasket.
    • Timing cover and the bolts. Tighten the bolts to 11 Nm (97 in. lbs.).
    • Crankshaft pulley hub and the crankshaft pulley.
    • Oil pan.
  2. Lower the vehicle.
  3. Install or connect the following:
    • Power steering pump.
    • Alternator.
    • Drive belt tensioner.
    • Drive belt.

Aug 29, 2009 | 2002 Chevrolet Cavalier Coupe

2 Answers

Need help with belt problem on 94 chevy cavalier


  1. Disconnect negative battery cable and remove coolant reservoir.
  2. Remove serpentine belt. Refer to Drive Belts, Mounts, Brackets and Accessories / Drive Belt. See: Drive Belt\Service and Repair
  3. Remove two generator bolts.
  4. Remove power steering pump and position aside.
  5. Remove tensioner bolts and tensioner.
  6. Reverse procedure to install, Torquing tensioner bolts to 37 ft. lbs.

Jun 30, 2009 | 1994 Chevrolet Cavalier

3 Answers

Cannot turn the wheel easily there'floid in tank but there does not seem to be any pressure this is a 2.4 and no belt


No belt? I think we found your problem. :) Ned what drives your alteernater, water pump, A/C, and power steering pump?

Jun 22, 2009 | 1998 Chevrolet Cavalier

1 Answer

Where are the bolts located on the power steering pump?


you have power steering bolts in the accessed holes in the pulley.you have to turn pulley until the holes in pulley line up to the power steering bolts.

Apr 25, 2009 | 1998 Chevrolet Cavalier

2 Answers

Serpentine belt keeps coming off my 1992 Chevy Cavalier


Hi Chris. I would check all the pulleys with the belt off and make sure the alternator, ac pump, power steering pump are all turning fairly easy and that the pulleys havent come loose and started wobbleing alittle.

Mar 15, 2009 | 1994 Chevrolet Cavalier

1 Answer

Power steering pump


hi how are you?
1 remove the negative battery cable
2remove the drive belt
3remove the inlet and outlet lines from pump
4remove the 3 pump to bracket bolts then remove the pump
5if necessary,use a puller to remove the pump pully

Jan 15, 2009 | 1992 Chevrolet Cavalier

Not finding what you are looking for?
1994 Chevrolet Cavalier Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...