Question about Cars & Trucks

2 Answers

How to repair power window motor - Cars & Trucks

Posted by Anonymous on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,911 Answers

You take the door apart, generally means removing interior panel.
Generally makes more sense to replace the entire regulator assembly
than just the motor. You can find these on ebay, at auto parts stores, and at dealers. They get more expensive in that order. New is better than used as they have about the same life span so to put a used one in means you will be doing it again next year. There are often special tools, snaps, adapters required and often very large rivets must be removed and replaced. Thus while you can do it yourself if you have all this stuff on hand, it is easier and quicker to pay a glass shop to do it for you in a few hours for about $50.00.

Posted on May 12, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Replace the brushes in the motor for about $2. Get them from a hobbie shop. 1/4 or 5mm

Posted on Jun 19, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix a drivers side motor


Aaron, if you are talking about driver side power window motor, first check that power is getting to switch, if it is replace power window motor. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How To Diagnose your Power Window Problem Is the Switch or motor bad
AGCO Automotive Repair Service Baton Rouge LA Detailed Auto Topics...
How To Install Repair Replace Power Window Motor Chevy Impala 00 05 1AAuto...
How to Replace Power Window Motor

Apr 23, 2016 | Cars & Trucks

1 Answer

How to change left rear window motor on a 1997 f 350


Instructions
    • 1

      Remove the 1997 Ford F350's power window switch from the door panel with the trim tool. Unclip the window switch from the power window wiring harness by hand.

    • 2

      Remove the hex-head screws from the door panel with the socket set. Lift the door panel upward 1 inch before pulling it off the door by hand.



    • 3

      Elevate the window glass to the top of the window channel by hand. Tape the glass to the top of the door with packing tape to prevent it from descending into the door during the repair.

    • 4

      Unclip the F350's power window wiring harness from the power window motor by hand. Unbolt the old power window motor from the door and window regulator with the socket set.

    • 5

      Remove the old window motor before inserting the new power window motor in its place.

    • 6

      Bolt the new window motor to the window regulator and door with the socket set. Plug the power window wiring harness into the new window motor.

    • 7

      Reinstall the door panel by reversing the method employed to remove it.



Nov 05, 2012 | Ford Cars & Trucks

1 Answer

How do you get a power window down for replacement


In most cases you would need to disconnect the motor from the regulator or the regulator from the glass.

Sep 25, 2012 | 1998 Toyota Sienna

1 Answer

Where is the rear window relay located on the 2002 Ford Explorer sport trac. Not the rear door windows but the very back window.


  • The power rear window is inoperative (Explorer Sport Trac only)
  • Circuitry.
  • Battery Junction Box (BJB) fuse 3 (30A).
  • Central Junction Box (CJB) fuse 20 (7.5A).
  • Power rear window control switch.
  • Rear window glass motor.

NOTE: The power rear window motor is not on the multiplex link. Any diagnosis and testing carried out on the power rear window will not involve the GEM module. NOTE: The reinitialization procedure must be carried out when repairs are performed on any part of the power rear window system including when the power rear window motor is removed from the window regulator drum housing, a new power rear motor is installed, a new power rear window regulator is installed, a new power rear window module is installed, and any operation in which grease or lubricants are applied to the power rear window system.

Rear Window Motor Initialization s1r~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Make sure that no obstructions are present in the power rear window system when carrying out this procedure.
NOTE: This procedure must be carried out when repairs are performed on any part of the power rear window system including when: the power rear window motor is removed from the window regulator drum housing, a new power rear motor is installed, a new power rear window regulator is installed, a new power rear window module is installed, and any operation in which grease or lubricants are applied to the power rear window system.
NOTE: All power rear window components (window glass module, window regulator, window motor, and glass runs) must be installed and torqued to specification before carrying out this procedure.
NOTE: Steps 1-6 must be completed within 30 seconds. The entire procedure must be completed within five minutes.
NOTE: Once the ignition key is turned to the ON position in Step 6, it must remain on until the entire procedure is completed.
NOTE: Steps 7 and 9 require that the power rear window control switch be held in the closed position until the power rear window motor stalls the window in the upper header seal. Step 8 requires that the window control switch be momentarily turned to the open position.
  1. Start with the ignition in the OFF position.
  1. Turn the ignition to the ON position.
  1. Press the power rear window control switch vent button six times.
  1. Turn the ignition to the OFF position.
  1. Press the power rear window control switch vent button six times.
  1. Turn the ignition to the ON position. The power rear window will move up-down-up-down approximately 20 mm (0.8 in). This movement indicates that the power rear window motor has entered initialized mode.
  1. Rotate and hold the power rear window control switch to the closed position until the window stalls in the upper header seal.
  1. Momentarily rotate the power rear window control switch to the open position and release. The power rear window will carry out a one-touch down operation until the window stalls at the bottom of the travel stop designed into the window regulator.
  1. Rotate and hold the power rear window control switch to the closed position until the window stalls into the upper header seal. Once this operation is complete, the window will move up-down-up-down approximately 20 mm (0.8 in). This movement indicates that the power rear window motor has been successfully initialized.
  1. Verify correct operation of the power rear window by moving the window to the fully open, vent, then fully closed positions
---------------------------------------------------------------------------------------------

Nov 16, 2010 | 2001 Ford Explorer Sport Trac

1 Answer

2003 Mitsubishi Outlander power window repair. I


just repair the broken wire with heatshrink[after youve respliced it] and check operation of motor.if it works,make sure wiring is securely cabletied out of the way,when reassembled

Sep 12, 2010 | 2003 Mitsubishi Outlander

2 Answers

Power window wont go up is it the fuse or motor


Ok in my travels over the years of auto repairs I have yet to find an actual fuse that controlls the power windows, so here is my educated guess from what you are telling me here, the power window wont go up, usually it is the motor inside the door, sometimes it is the power window switch and rarely it is a bad connection or broken wire, so here we go; first press the poer window in the close position...with the dome light on(interior light) does the dome light dim a little wuith you pressing the window switch yet the window wont budge? If you said yes the light does flicker itt is safe to say the window switch is fine and the problem is the power window motor...part should be appro. 75.00-100.00 after market, if the window switch shows no signs of the interior light dimming ever so slightly, I suspect the window switch is at fault, replace the switch panel, most repair parts stores stock them if not get one ordered from the dealership.

Apr 14, 2010 | 2003 Oldsmobile Silhouette

1 Answer

Car power window failed - need to get closed


You would have to remove door panel and remove the two nuts fastening the window to the window motor regulator then slide window up and use tape to hold it up until you can get it repaired

Nov 26, 2009 | 2000 Pontiac Montana

1 Answer

I need instructions on how to replace power window motor for the front driver side window of a 2002 Grand Cherokee


Power Window Motor: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the window regulator from the door.
3. Place the window regulator on a suitable work surface and remove the screws that secure the power window motor to the window regulator.
4. Remove the power window motor from the window regulator.
INSTALLATION
1. Position the power window motor onto the window regulator.
2. Install and tighten the screws that secure the power window motor to the window regulator. Tighten the screws to 9 Nm (80 in. lbs.).
3. Install the window regulator onto the door.
4. Reconnect the battery negative cable.

Oct 30, 2009 | 2002 Jeep Grand Cherokee

2 Answers

Power window problems


http://www.paulstravelpictures.com/Grand-Prix-Window-Motor/Grand-Prix-Window-Motor-02.html try this site if it will not work anymore. it has step by step instructions.

Jul 11, 2008 | 2000 Pontiac Grand Prix

1 Answer

Power window problems


Repair procedure: REAR POWER WINDOW MOTOR INSPECTION 1. Remove the rear door trim panel. (Refer to BD group-Rear door) 2. Disconnect the 2P connector from the motor.f07bc65.gif 3. Connect the motor terminals directly to battery voltage (12V) and check that the motor operates smoothly. Next, reverse the polarity and check that the motor operates smoothly in the reverse direction. If the operation is abnormal, replace the motor.

Jun 16, 2008 | 2000 Hyundai Accent

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,637 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...