Question about 2008 Jeep Wrangler
Posted by Anonymous on
Though they show Jeeps and other 4x4's going through water and flying through the air, in reality they aren't much better protected from the elements than a passenger car. Those used for that are sealed better (even the intake and exhaust inlets and outlets are moved) You are going to need to unplug and dry out every sensor and wire connection, then spray with a good tuner/contact cleaner (sold at most radio shack stores etc)
It is possible that you blew out a diode in the alternator as well. Diodes are very hot and if splashed with water, they shatter. Check to see if the battery is low on voltage (if low, alternator is your first suspect).
Worst case imaginable is that you got water into the intake. If so, it may have hydro-locked one or more cylinders. If so, removing the spark plugs can help, but water is non-compressible and if it got into a cylinder, it can bend or break a connecting rod. (hope not but it can happen)
Hope this helped. Feel free to ask if you run into anything you don't understand and I'll be glad to help!
Posted on May 12, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jan 30, 2017 | 2013 Jeep Wrangler
Feb 11, 2015 | Cars & Trucks
Jul 17, 2011 | Ford Focus Cars & Trucks
Mar 18, 2010 | 2008 Jeep Wrangler
Feb 25, 2009 | 1997 Chevrolet Lumina
96 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: