Question about Cars & Trucks

1 Answer

When I turn the key it doesnt start. Battery is good I can by pass the relay in the motor area fuse block and it starts right up.i have by passed the clutch switchchanged the ignition switch all accessories work.i have changed the relay in the fuse box. Using a dc volt meter I know that the power is not getting to the relay...i am stumped

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

2003 nissian sentra wont start .I worked on it putting on valvs and gaskets put back together and now wont start . 2 rows of fuses are blown under hood and inside but could by pass relay under hood and would start . please help

Posted on Oct 16, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

When you turn the key it doesnt turn the motor. but you can turn the motor jumping the starter.cant figure it out


Bad ignition switch. If auto could be bad park sensing switch. Try starting in neutral

Apr 11, 2015 | Cars & Trucks

4 Answers

Turn key get nothing jump starter and sylenoid just spins


i cant dope out that symptoms.

does it crank or not. be clear there.

no car starts (but my 6sp) if it dont crank.

on A/T cars cranking is a first thing. so does it.?

Solenoids do not spin, the stroke only , it a linear motion.

the Sol. moves the pinion and the main contactor switch only.



my guess is the Starter spins and the crank don\'t spin,

you hear the starter motor spin up, it sings. like bird.

that means the starter /solenoid are bad. (crude)

if the battery is good and or jumper starting off a running car.



It can just be a dirty starter pinion, clean it , repeat.

fixed many for this. i have.



battery cable lugs clean, and good. no green rust.

bad cable usually just make a loud THUNK sound. no spin.

Sep 02, 2014 | 2005 Jeep Wrangler X

2 Answers

Pickup will not start. have new battery still nothing is there a fuse or relay to start motor


if it cranks over-it may be an ignition system fault/ if you turn the key and nothing happens at all with a good battery-it may be a bad starter motor-the starter motor has a very small wire connection not like the big fat starter motor battery connection-it is small and comes from the ignition switch - just apply 12 volts from the battery to that connector terminal and the motor will crank-key off it will not start-turn key to ignition on- it will start, so be in park and block the wheels and do not make a mistake

Apr 29, 2014 | 2001 Ford Ranger Regular Cab

1 Answer

When I turn the key nothing happens. The starter doesn't even try to draw power from the battery. However, if I by-pass the starter relay it will turn over the motor but will not provide spark or...


Hi! It sounds like a bad solenoid, or that you're not getting the 12 volts to the solenoid to engage the heavy amperage needed to turn thr starter motor.
When you say you bypass it,do you mean you are just crossing the large post of the solenoid with the battery cable connection at the starter?
When you turn the key,you should get 12 volts at least at the smaller post on the solenoid.If you have 12 volts there when the key is all the way to `start 'position,then the starter probably ought to be replaced.
This car being a 2000 is 13 yrs.old.Won't hurt to put a new starter on it.
don-ohio (:^)

Dec 17, 2012 | 2000 Ford Focus

1 Answer

Car doesnt want to start. all lights come on when in the on position however when I turn it to start nothing happens it dont even try to turn over it just clicks 2002 hyundai xg350


The starting system consists of:
  • starter motor
  • starter switch, part of the ignition switch
  • starter motor solenoid relay switch
  • starter solenoid
  • starter drive
When you turn your key to start your engine, it just clicks, right? If so, more than likely this is due to a bad battery. Even though your battery may appear to be fully charged, it may have a dead cell, or worse. If you get a jump, does the vehicle start? If so, replace your battery.

Possible sources of the problem if the engine does not crank or the relay clicks:
  1. Battery
  2. Starter motor
  3. Starter motor relay
  4. Ignition switch
  5. Damaged fuse
  6. Anti-theft system
  7. Circuitry

Mar 16, 2011 | Hyundai XG350 Cars & Trucks

1 Answer

The beast wont start on the key, battery ok , ign switch ok, blue relay on fuse box clicks when key turned , no clicks from under bonnet, connectors inspected cleaned etc no voltage drop at battery when...


Hello! The Inhibitor relay is more than likely not pulling...If the vehicle is an automatic the selector switch passes battery when in park on a yellow wire to the relay...If a standard the clutch switch passes ground...if manual, relay is called clutch interlock...located under hood...passenger side fender...Automatic...called interlock relay...drivers side fender to the right of air intake...diagram may be to small to read but I'm limited on size...Light Green wire on clutch switch supplies ground when switch is closed pulling relay...Yellow wire off gear selector switch (park) supplies battery to the inhibitor relay...Wish I knew if your vehicle was man. or auto...See if proper batt. or gnd. is present to pull relay...If proper potential is present and the relay does not pull it is defective...Send a comment...

Guru........Saailer








saailer_76.gif

Feb 06, 2011 | 1990 Nissan Hardbody King Cab

2 Answers

When I turn the key it doesnt start. battery is good, I can by pass the relay in the motor area fuse block and it starts right up.I have by passed the clutch switch,changed the ignition switch all...


If u changed the ignition switch u need to have the VATS (vehicle antitheft system) module reprogrammed, u are locked out by the Passlock system, u will need to get the dealer involved to do this programming..

Mar 17, 2010 | Chevrolet Cavalier Cars & Trucks

2 Answers

F150


check starter relay

Oct 26, 2009 | 1998 Ford F150 Regular Cab

3 Answers

The battery is new. 93 4runner. Turn Key, everything works, turn the key to start, hear the click and then nothing. No clock, no lights, on horn, nothing, as if the battery were disconnected. Jiggle wire...


Check the tremianls on the battery. also follow your ground cable to where it is attached to the frame, motor or body. if the cables are in good shape, cut off the old terminals and replace them with new ones from the parts store. They are only a couple of dollars each.

Aug 15, 2009 | 1993 Toyota 4Runner

1 Answer

Turn key wont start,new battery,good fuses,bench test starter ok?


Have you tried shifting into neutral to start? If yes then perhaps the key switch is bad. One other thing to check would be the starter relay.

Apr 25, 2009 | 1989 Chevrolet C1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...