Question about Cars & Trucks

1 Answer

1991 dodge brake problems

I have 91 dodge D-350/cummins diesel. I do not have brakes any where on the vehicle except the left front. There isnt any braking at the rear or right front. Is it possible the the equalizer/proportioning valve may not be working.

Posted by Anonymous on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 373 Answers

Its called a metering valve. Its located to the side of the master cylinder. To check this valve start engine and have someone to press down on brake pedal several times. Look at the metering valve and you will see a small black button on the front of the combination valve. If the valve is working correctly, the stem will extend and retract each time the brake pedal is depressed and released. If not then replace the combination valve. Hope thius will help you.

Posted on May 12, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2003 dodge Cummins will not steer left or right when applying brakes. What is problem?

I think it is called the hydraulic brake booster. It is on the fire wall, drivers side.

Aug 21, 2016 | Dodge Ram Cars & Trucks

1 Answer

1991 dodge dakota front brake sticks when driven 15 or 20 miles and pulls hard to the left

check the caliper it may be hanging up also check the rubber brake hose sometimes they collapse or swell causing drag either way you probably need 2 calipers and new lines(hoses) along with pads.

Aug 22, 2012 | 1991 Dodge Dakota

1 Answer


Never known a ballast resistor in a altenator but their is a zena diode ,this is not to say their isnt one on a american vehicle but iam in europe so never seen one but i would imagine the part would be available from a local bosch repair agent as they have everything else in our local agency

Sep 26, 2011 | 1991 Dodge Ram 350

2 Answers

When pushing the brake the truck steering wheel turn to the right

get the brakes checked , one side may not be working, also check steering arms ball joints and wheel bearings

Dec 18, 2010 | 1991 Dodge Ram 150

2 Answers

2001.5 Dodge Ram Diesel 2500 4x4 Brake Pedal drops to floor

It sounds like you have a bad mastercylinder cause when you panic brake it doesn't have time to bleed through the valve in the cylinder but under normal braking your foot is on pedal longer in turn giving the fluid time to bypass the valve in the mastercylinder in turn the pedal going to the floor.

Apr 21, 2010 | 2001 Dodge Ram 2500 Truck

2 Answers

I have a 2001 Dodge Ram 2500 5.9 Cummins Diesel No Brake Pedal

I worked on a Dodge car one time and I had a problem with the brakes almost similiar to yours.It turns out a cheap pair of brake pads can mess up your system. I would suggest Bendix pads I also noticed you didn't mention the rear shoes. Any way use better pads it might help.

Apr 06, 2010 | 2001 Dodge Grand Caravan

1 Answer

How do ya proprly bleed brake/power steering on a 97 dodge 3500 with 5.9 cummins

leave the cap off the top jack up front end and tern weels all the way to the right then to the left over and over till the flued isnt fomey..

Feb 07, 2010 | 1999 Dodge Ram 2500 4WD

1 Answer

1999 dodge cummins 2500 front axel seals

you need to pull off wheels,brakes, rotor /unit hub bearing, both axles and intermediate shaft, as well as the vac disconnec ton the front axle tube. if only the right side leaks then only then only pull the right axle and intermediate shaft and vac disco. it is a trick with a miller tool to replace the seal. the left side seal is inside the diff and the carrier has to come out to replace it. pete

Jun 09, 2009 | 2004 Dodge Ram 2500

1 Answer

2003 Dodge Ram 2500 diesel 4x4 wiring diagram


Apr 21, 2009 | 2001 Dodge Ram 2500 Truck

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

452 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides