Question about 1997 Honda Accord

1 Answer

Fuel consumsion is very low. May be I am using wrong injectors

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,793 Answers

If you were using "the wrong injectors"the car would run like a pig.and your cat would last months,first fit a clean air filter on,then check fuel use.also contrary to some,leave o/d "on"Do not switch it off.then as your car is computer controlled try using higher octane gas,then check consumption...you could also check coolant temp,cos if too low,gas goes up.

Posted on May 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 mitsubishi eclipse GT 3.0L code P0401


There are more things that can cause a random misfire then the ignition system; even though it is the most common reason.. Have you checked the ignition coil's maximum output; it should be no less then 25KV (25,000 volts).
Yes the wrong PCV could cause an intermittent misfire; likely a lean misfire; the valve might be drawing to much vacuum.
Other things are engine mechanical; low compression, worn valve guides, worn/loose timing belt, or just general overall engine wear.
The fuel system; low fuel pressure, low fuel volume, plugged or leaking fuel injectors, injector(s) beginning to fail electrically, injector drivers (computer).
The exhaust system; a converter partially plugged; as in the monolith catalyst inside the converter is breaking up into pieces and intermittently plugging up the outlet of the converter. This could also answer the EGR flow insufficient code?

Jun 18, 2014 | 1998 Chevrolet S-10 Pickup

2 Answers

Hyundai santa fe 2001


Car error codes::


Diagnostic Trouble Code Storage Condition Remedy
P0100 Mass Air Flow Sensor Voltage High C-8
P0100 Mass Air Flow Sensor Voltage Low C-8
P0110 Intake Air Temperature Voltage High C-10
P0110 Intake Air Temperature Voltage Low C-10
P0115 Coolant Temperature Voltage High C-9
P0115 Coolant Temperature Voltage Low C-9
P0120 Throttle Position Sensor (TPS) Voltage High C-7
P0120 Throttle Position Sensor (TPS) Voltage Low C-7
P0130 O2 Sensor 1 Circuit Voltage High C-30
P0130 O2 Sensor 1 Circuit Voltage Low C-30
P0130 O2 Sensor 1 Open Circuit C-30
P0150 O2 Sensor 2 Circuit Voltage High C-31
P0150 O2 Sensor 2 Circuit Voltage Low C-31
P0150 O2 Sensor 2 Open Circuit C-31
P0201 Injector Valve 1 Voltage High C-20
P0201 Injector Valve 1 Voltage Low C-20
P0201 Injector Valve 1 Open Circuit C-20
P0202 Injector Valve 2 Voltage High C-21
P0202 Injector Valve 2 Voltage Low C-21
P0202 Injector Valve 2 Open Circuit C-21
P0203 Injector Valve 3 Voltage High C-22
P0203 Injector Valve 3 Voltage Low C-22
P0203 Injector Valve 3 Open Circuit C-22
P0204 Injector Valve 4 Voltage High C-23
P0204 Injector Valve 4 Voltage Low C-23
P0204 Injector Valve 4 Open Circuit C-23
P0205 Injector Valve 5 Voltage High C-24
P0205 Injector Valve 5 Voltage Low C-24
P0205 Injector Valve 5 Open Circuit C-24
P0206 Injector Valve 6 Voltage High C-25
P0206 Injector Valve 6 Voltage Low C-25
P0206 Injector Valve 6 Open Circuit C-25
P0230 Fuel Pump Relay Voltage High C-6
P0230 Fuel Pump Relay Voltage Low C-6
P0230 Fuel Pump Relay Open Circuit C-6
P0325 Knock Signal Circuit 1 C-26
P0330 Knock Signal Circuit 2 C-26
P0335 No Engine RPM Signal C-32
P0335 Incorrect RPM Signal C-32
P0340 Hall Sensor Voltage High C-15
P0340 Hall Sensor Voltage Low C-15
P0403 EGR Valve Voltage High C-28
P0403 EGR Valve Voltage Low C-28
P0403 EGR Valve Open Circuit C-28
P0410 Secondary Air Pump Voltage High C-27
P0410 Secondary Air Pump Voltage Low C-27
P0443 Fuel Tank Ventilation Valve Voltage High C-29
P0443 Fuel Tank Ventilation Valve Voltage Low C-29
P0443 Fuel Tank Ventilation Open Circuit C-29
P0500 Vehicle Speed Signal C-42
P0505 Idle Air Control Voltage High C-33
P0505 Idle Air Control Voltage Low C-33
P0550 Power Steering Voltage High C-14
P0550 Power Steering Voltage Low C-14
P0560 Battery Voltage High C-4
P0560 Battery Voltage Low C-4
P0602 Control Module Programming Error C-2
P1110 Intake Manifold Valve 1 Voltage High C-34
P1110 Intake Manifold Valve 1 Voltage Low C-34
P1111 Intake Manifold Valve 2 Voltage High C-35
P1111 Intake Manifold Valve 2 Voltage Low C-35
P1230 Power Supply Relay Secondary Circuit C-3
P1405 EGR Valve Feedb. Voltage High C-28
P1405 EGR Valve Feedb. Voltage Low C-28
P1405 EGR Valve Feedb. Incorrect Signal C-28
P1501 Immobiliser No or Wrong Coding C-5
P1502 Immobiliser No Signal C-5
P1503 Immobiliser Wrong Signal C-5
P1530 A/C Relay Voltage High C-41
P1530 A/C Relay Voltage Low C-41
P1600 Reprogram or Replace Electronic Control Unit (ECU) C-2
P1602 Knock Control Module; Replace ECU C-2
P1690 Check Light Voltage High C-43
P1690 Check Light Voltage Low C-43
P1690 Check Light Open Circuit C-43
P1740 Torque Control Voltage Low C-40
P1740 Continuous Torque Control C-40

These are the error codes:

Jul 08, 2008 | 2001 Hyundai Santa Fe

1 Answer

High fuel consumsion on ML 350,2005 model, how to solve


Scope it. The ratio is off and it might need the computer chip reset or reprogrammed. Does it smell like it is burning rich?

Sep 21, 2013 | Pontiac Cars & Trucks

2 Answers

Po261, po267, po270, po273, po276 po279


P0261 Cylinder I Injector Circuit Low P0270 Cylinder 4 Injector Circuit Low P0273 Cylinder 5 Injector Circuit Low P0276 Cylinder 6 Injector Circuit Low P0279 Cylinder 7 Injector Circuit Low this will hold true for each code you listed SymptomsPossible sumptoms of OBD code P0279
- Engine Light ON (or Service Engine Soon Warning Light) - Engine Misfire - Engine Run Rough - Low MPG CausesPossible causes of OBD code P0279
- Fuel Injector #7 - Faulty or Corroded Fuel Injector #7 Connector - Plugged #7 Fuel Injector - Dirty #7 Fuel Injector Possible Solutions- Clean Fuel Injector #7 Connector - Clean Fuel Injector #7 - Replaced Fuel Injector

May 31, 2011 | Ford F-250 Super Duty Cars & Trucks

1 Answer

I just recently replaced the spark plugs and wires on my 97 jeep wrangler, and the gas millege seems to have gotton a whole lot worse. What do you think could be wrong with it?


I would check to see if the fuel filter is clogged. You may have a gas leak. Your fuel injectors may be leaking as well. Make sure the tires are at correct inflation. If they are low, you will use more gas. You can also drop a fuel injector cleaner into the gas tank to see if that will help.

Feb 23, 2011 | 1997 Jeep Tj

1 Answer

My 95 camry won't cold start unless I use starter fluid a couple of times then low rpms til warm up then runs find. Checked spark,iac,throttleprosition,changed fuel pressure bypass


Maybe needs new fuel filter, possibly new fuel pump. Check fuel pressure, low fuel pressure would indicate a problem with fuel filter or fuel pump. If fuel pressure is sufficient, fuel injectors may be shot. Use a stethoscope, or screwdriver, to listen to each injector to check for a clicking sound, signaling that the injector is operating.

Apr 27, 2010 | 1995 Toyota Camry

2 Answers

I have an 1996 f250 powerstroke and it is running rough.


The most common problem is a bad fuel injector but if you haven't already done so--check to make sure your oil level is all the way up to full.Power Strokes use a high pressure oil pump to operate their injectors and if your oil is at a low level it can cause air pockets in the lines going to the injectors.It's not a real common problem but I 've seen it happen maybe 10 times.Another cause is using the wrong kind of oil.Some oils have a tendency to foam at high pressures and can produce air in those same injector supply lines. Good luck!

Mar 01, 2010 | 1996 Ford F250 Crew Cab

5 Answers

2001 blazer will crank fine but wont start unless


what is the fuel pump pressure for a 2001 chevrolet blazer 4.3

Oct 21, 2009 | Chevrolet Blazer Cars & Trucks

1 Answer

My 2002 silverado needed fuel (gas light on). Got


Check fuel pressure at injector rail. It should be at least 45psi.
If it is low replace fuel filter. If pressure is still low you will need a new fuel pump.
Dirt from the bottom of the fuel tank may have burned the pump or blocked filter.

Jun 24, 2009 | 2002 Chevrolet Silverado 2500HD

Not finding what you are looking for?
1997 Honda Accord Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...