Question about Hyundai Motor 1993 Excel

Open Question

Replace the starter on a 1993 Hyundai Excel?

How difficult is it to replace the starter?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 12 Answers

SOURCE: Hyundai excel starter motor

hi,Joe---first of all take care using car stands! you can access the starter from the top or the bottom but small hands are an asset,--- disconnect the battery, using a 12mm spanner undo the main lead on the starter solenoid,and pull off the additional wire(push on, pull off) now you will need a socket,extension,and ratchet to undo the two only mounting bolts--do this successfully and out she will come----cheers

Posted on May 28, 2009

ghost4548
  • 776 Answers

SOURCE: Change front and rear speakers in 1999 Hyundai excel

Go to http://www.hmaservice.com/ and register (vehicle by VIN). Afterward, you'll have access to technical information (manuals, wiring diagrams, service bulletins, etc) about your vehicle.

Posted on Jun 26, 2009

ghost45
  • 1280 Answers

SOURCE: Engine torque wrench settings for Hyundai

Go to www.hmaservice.com and register( Vehicle by VIN). Afterward, you have access to shop manuals, service bulletins, wiring diagrams, etc. about your vehicle.

Posted on Oct 04, 2009

wracefans24
  • 1985 Answers

SOURCE: Is it difficult to replace a starter in a 1993

if its a four cylinder ,no
if its a 3.0 or 3.3 yes,tougher to get out

Posted on Dec 25, 2009

duane_wong
  • 6826 Answers

SOURCE: replacing a starter on a 1993 volvo 940 turbo. Is

It looks easy for the 940 but I am not sure about the 940 turbo, as maybe some of the turbo parts are in the way. I'm not sure about that, since there is no documentation on the turbo model vs. the 940 standard model. If you can follow the following instructions, then I would give it a whirl.

REMOVAL & INSTALLATION - 1993 Volvo 940

  1. Disconnect the negative battery cable at the battery.
  2. Disconnect the leads from the starter motor.
  3. Remove the starter motor retaining bolts.
  4. Remove the starter motor from the vehicle. To install:
  5. Position the starter motor to the flywheel housing.
  6. Apply locking compound to the bolt threads and install the retaining bolts finger-tight.
  7. Tighten the bolts to approximately 25 ft. lbs. (34 Nm).
  8. Connect the starter motor leads and the negative battery cable. Fig. 1: Unfasten the nut retaining the starter cables . . . 90952p12.jpg
    Fig. 2: . . . and remove the starter cables 90952p14.jpg
    Fig. 3: Unfasten the starter retaining bolts . . . 90952p11.jpg
    Fig. 4: . . . and remove the starter from the engine 90952p15.jpg
prev.gif next.gif

Posted on Oct 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 hyundai excel won't start


Hi there sound very much like a failed fuel pump, they are electric and is possibly under your back seat, turn ignition on a listen closely for a humming noise, if not there then I would say you need to replaces the pump, check to see if you have power to the pump first, use a test light, hope this helps cheers good luck

Mar 08, 2014 | Hyundai Motor 1993 Excel

1 Answer

1993 hyundai hesitates when shifting into 2nd gear.


sounds like the bands are getting week, if this is so they need replaced befor gets worse. good luck.

Mar 27, 2011 | Hyundai Motor 1993 Excel

3 Answers

Signs to look for for time to get timing belt looked at. I have just purchased a second hand Hyundai 1993 excel sprint (maual transmission) but service record doesn't show any replacement being done on...


look at mileage. the replacement of the timing belt needs to be done at 60,000 miles. you risk severe damage if this is not done. these belts costs around $300-400 to do.

Nov 15, 2009 | Hyundai Motor 1993 Excel

1 Answer

Engine torque wrench settings for Hyundai Excel,built 1993 cap 1500cc, in Australia


Go to www.hmaservice.com and register( Vehicle by VIN). Afterward, you have access to shop manuals, service bulletins, wiring diagrams, etc. about your vehicle.

Sep 26, 2009 | Hyundai Motor 1993 Excel

1 Answer

1993 Hyundai Excel motor runs very rich fuel mixture at idle and at all speeds. Fuel injected.Stalls easily at idle.Black smoke out of exhaust.Have replaced temp sensor to no avail.


sure he has an ecm installed .. its an injection based car.. probably air filter isn't that good .. also check if air intake pass is clear of any wastes

Apr 27, 2009 | Hyundai Motor 1993 Excel

1 Answer

Hyundai 1993 Excel 1.3 litre injected ,travels a few hundred Kilometres and stops only to go again a half hour later. Check Eng Light comes on. Cheers, Laurie.


it's an ecu related problem .. a component in the ecu is overheating and has to be replaced .. possibly a transistor in the power input area

Feb 20, 2009 | Hyundai Motor 1993 Excel

Not finding what you are looking for?
Hyundai Motor 1993 Excel Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...