Question about 1994 Dodge Stealth

1 Answer

1994 dodge steath will not start no spark or gas at spark plug

Hi i need help i just changed my clutch and starter in my 1994 stealth turbo and know it wont start it turns over but no spark when you turn the key. If you push start it the car starts. I tryed starting it for two days noe and i get no spark at the spark plug or gas it dosint flood itself if you keep turning it over but i do have power to the coil when i turn the keys please help? Could it be bad ground? cam sensor? crank sensor? or?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,309 Answers

Bad ignition switch not giving power on start mode

Posted on May 12, 2010

  • Terry Bradley Dec 28, 2013

    Is there a way to check an see if the ingnition switch is bad

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I have a 1994 Dodge Stealth 3.0 DOHC Non Turbo. It won't start. It only gets fire on one coil. All teh coils are good fule pump works, New crank sensor, New spark plugs and wires, motor been port and...


look did u replace the censor where harmonic balancer is an the an the crank censor they are both like magnitos theres a metal fan blade looking thing that rotates through it make sure its not damaged an locked down let me know my email is lildevil6290@gmail.com

Mar 15, 2011 | 1994 Dodge Stealth

2 Answers

I used cam locks and belieseems that my crank sensor is not working now so I would like to know how to double check my timing marks before I close it up again. Can you help?ve I followed all the...


You should be able to remove the upper front forward cam-dust covers. With these out you should be able to align the cams to their timing marks. As for the crank you'll have to rely on the timing mark on the forward crank pulley/harmonic balancer.
I hope this may have assited you. If you in need of further info or images please send a note back.
Best regards,
Tom

Nov 08, 2009 | 1994 Dodge Stealth

1 Answer

Timing marks on 94 dodge steath, 3.0 sohc basic model?


If there are timing marks on it they are most likely viewed through a small opening between the engine and transmission. There is usually a small black rubber type cover of the hole. This is assuming you have a regular distributor and not a coil pack that is used on other models.

Sep 10, 2009 | 1994 Dodge Stealth

2 Answers

Need to bleed clutch to get peddle


try to vacuum bleed the system at the master most hand vacuum kit come with adapters to fit over the master reservoir otherwise the system may need a new master or you may have a leak

Sep 04, 2009 | 1994 Dodge Stealth

1 Answer

Where is fuel pump relay on 1991 steath es


Hi,

The fuel pump relay is located on the pasenger side, in the engine compartment. Kind of forward of the strut tower. It may be marked MFI.


Hope i helped you.

Thanks for using "Fixya".

Jun 23, 2009 | 1991 Dodge Stealth

1 Answer

Clutch goes to floor will not engage


Bleeding won't fix it,If it can be put in gear and car doesn't move your clutch is no good.

May 28, 2009 | 1994 Dodge Stealth

2 Answers

I put a new clutch pressure plate and throw out bearing in my 1993 dodge stealth along with a new slave cylinder and itr wont disengage


Sounds like you may have some air in the clutch..Try and bleed the clutch a few times and see if that helps the problem..Hope this helps you and have great night....

Apr 06, 2009 | 1993 Dodge Stealth

Not finding what you are looking for?
1994 Dodge Stealth Logo

227 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...