Question about 1999 Ford Expedition

1 Answer

How to change ac pulley on 1999 ford expedition

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Remove the bolt from the front of it pull the clutch off then there's a spring clip behind the clutch remove that then lightly pry between the OUTSIDE of the pulley and the compressor it should work off

Posted on Feb 13, 2011

  • 1 more comment 
  • trus220634 Jun 09, 2011

    Can you change out the pully without removeing the compresser.

  • Jared Marsden Jun 29, 2011

    Yes you can change it while its still installed in the vehicle

  • Jared Marsden Jun 29, 2011

    You certainly can and that's where I would recommend doing it so you don't have to drain and recharge the system

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cabin filter 1999 ford expedition


hey bill here's some photos and instructions for you
26383626-lw30xb3gqn3gwqtvkpmbzy1k-2-0.jpg now go to rock auto.com look up your truck you will see this filter in heat and ac then click on instructions for the pdf good luck stephen

Dec 03, 2016 | 1999 Ford Expedition

2 Answers

I need to know what I need to do to bypass the ac on a serpentine belt on a 1998 Ford Expedition. Is it a different belt that the regular one, or a different way to place it?


Well I will start by saying it can't be done.
Now, there might be a way if you can find a pickup truck without ac.
Standard pickup trucks with the 4.6 and 5.4 engines do come without ac in rare cases, especially ones sold in northern states. And the routing is the same for either truck engine without ac. But the belts are different between the pickup trucks and your Expedition. I don't know what difference is other than the Expedition belt is slightly shorter than the pickup truck belts with ac.
You may be able to run a shorter belt over the pulley above the crank and then over the pulley above the compressor, but I would expect to find bolts and brackets in the way.
And there is no way to know what the length would be without trying to measure the distance going that route, since engines without ac are routed differently. Some of the idler pulleys are in different places on the engines without ac.
And since all Expeditions come with ac, there is no belt listed without ac to get the length.

Feb 18, 2013 | 1998 Ford Expedition

1 Answer

1999 ford expedition heater not working


if it comes on but blowes cold air, or the ac still works it is the heater core, if it does not come on at all change the blower motor, make sure you check the fuses firs to make sure its not that!

Dec 07, 2010 | 1999 Ford Expedition

1 Answer

Humming noise under the hood when it is warming up?


There are many things that may cause this but the most common would be a bad belt pulley or an acc, like the ac compressor clutch or the alternater, you would need to remove the belt and spin each pulley by hand to see if there noisey or loose,

Nov 08, 2010 | 1999 Ford Expedition

1 Answer

Front AC not working, but back AC is working on a 1999 Ford Expedition, Where do I find a wiring diagram?


CHECK TO MAKE SYRE YOU HAVE A TEMPERATURE CHANGE WHEN GOING FROM HOT TO COLD WITH CONTROLER,IF NOT PROBABLE BROKEN TEMP BLEND DOOR

Aug 24, 2010 | 1999 Ford Expedition

1 Answer

Where is the low pressure AC servicing line in a


on passenger side engine of the vehicle in the receiver can

May 16, 2010 | 1999 Ford Expedition

1 Answer

Where is the AC Charger located for a 1999 Ford expedition.It is a v8


follow the large ac line/hoes from the ac compressor u will come to the small ac service port ,this is the one

Jul 05, 2009 | 1999 Ford Expedition

1 Answer

Cant find AC charger in a 1999 frod expedition. V8


look for the large ac line/hose coming from the ac compressor and follow it untill u come to the ac service port , it is the small port.

Jul 05, 2009 | 1999 Ford Expedition

Not finding what you are looking for?
1999 Ford Expedition Logo

Related Topics:

278 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...