Question about 2003 Chrysler PT Cruiser

Open Question

"no fuse" warning in odometer. Interior lights, mirrors, power locks, none work. ALL fuses test good.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
PitVipermd
  • 54 Answers

SOURCE: 1992 miata fuse diagram, location of power window

http://okmiataclub.com/spareparts/spareparts-images/1992wiring.pdf

Posted on Apr 24, 2009

Ad
  • 10 Answers

SOURCE: Power door locks quit working, both interior

motor1258.

how did you check the relays, to find the problem with the door locks you need to remove the door panel and test for power at the door lock actuator or you can just buy the master switch and put it in and see if it works.

Posted on Apr 29, 2009

carlsbiz
  • 1124 Answers

SOURCE: power windows, interior lights, mirrors, door

Probably a fuse or relay..
Find were they are in you manuel..

Hope this helps !!
Rate me good ;o)

Posted on Jul 13, 2009

moparownr
  • 667 Answers

SOURCE: 1998 Ford F150. windshield wipers,interior

check to see if you have corrosion in the fuse box or the GEM module, by removing the fuse box completely, disconnect the battery, take out the two screws and two 8mm bolts that hold the fuse box in, it will take some maneuvering to get it positioned right to disconnect the two wiring harnesses from the fuse box, they are bolted through the middle. Once removed, take the GEM module off the back of the fuse box and look for what would be something like the same corrosion you would see on your battery posts, usually one of these components is corroded and causing the problem, my buddy got a replacement fuse box for his from a wrecking yard for only 15 dollars, with all the fuses and relays. If you have this corrosion, then you probably have a windshield leak at the lower left hand corner of the windshield, it lets water drip onto the fuse box and GEM module. Hope this helps, let me know

Posted on Dec 07, 2009

Testimonial: "Mr. Guru, It was the GEM module. Thank you for helping with my problem. "

  • 12 Answers

SOURCE: Power windows stopped working

check the connections on the switch

Posted on Jun 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2000 Cadillac Escalate the power Mirrores,Vanity Mirrors,Reading Lamps the interior light not working The fuses are good what's next please helpe me to find the problem thanks ?


Check power connections, make sure none of the power connections to the fuse board are damaged, make sure the fuses are in the correct ports and that you used the correct fuses, check the main lights controller unit (usually a dimmer unit) it may be damaged.

Jan 28, 2015 | 2000 Cadillac Escalade

1 Answer

What could cause my power windows not to work?


Usually it is in the drivers window controller.There is a module that usually goes bad.

Dec 14, 2014 | Cars & Trucks

2 Answers

Doorlocks dont work except from passenger side. mirrors dont work. windows dont work from anywhere


First, check all fuses to make sure that none are blown.

If the door lock switch works on the passenger side, then the drivers side door lock switch is probably faulty. Use a multi-meter to test the Drivers Side Door Lock Switch (Black and Pink/Light Green wires unlock the vehicle, and the Black and Pink/Yellow wires lock the vehicle)
If the switch is tested and found to be operating properly, you may have a faulty Body Security Module or Drivers Side Door Lock Actuator.

If neither of your Power Mirrors are working, you probably have a faulty Exterior Rear View Mirror Switch, Power Mirror Module, or blown Central Junction Box Fuse.

If none of your Power Windows are working, you probably have a faulty Accessory Delay Relay or a blown fuse in your Central Junction Box or a faulty Master Window Adjust Switch (all of the Power Window Switches feed through this Master Window Switch). If the Power Windows didn't stop working at the same time, you may have faulty Window Adjust Switches, or faulty Power Window Motors, this is very unlikely though. It would also be a good idea to inspect the wiring for any obvious damage.

Mar 15, 2011 | 2005 Ford F-150

2 Answers

Fuel Pump Fuse Number for a 1998 audi a4 2.8 quattro


Fuses: Fuse arrangement in fuse panel, behind instrument cluster, left
Fuse Arrangement In Fuse Panel 62624464

1 - Heated washer jets 5A 2 - Turn signals 10A 3 - Headlight washer (relay), illumination for glove
compartment, climate control, Automatic Transmission, instrument cluster 5A 4 - License plate light 5A 5 - Instrument cluster, seat heating, test connection
for cruise control, bulb monitor for auto-check display, Automatic Transmission display, switch
lighting, mirror switches and actuators, airbag
warning light, outside temperature indicator,
climate control 10A 6 - Central locking system 5A 7 - Anti-lock brake system (ABS) 10A 8 - Vacant 9 - Mirror heating 10A 10 - Vacant 11 - Cruise control (Automatic Transmission) 5A 12 - On board diagnostic system 10A 13 - Brake lights 10A 14 - Interior lights, reading lights, anti-theft alarm system, vanity mirror 10A 15 - Instrument cluster, power windows, climate control, automatic transmission 10A 16 - Anti-lock brake system (ABS), Anti-Slip Regulation (ASR) 5A 17 - Heated door locks 10A 18 - High-beam, right 10A 19 - High-beam, left 10A 20 - Low-beam, right 15A 21 - Low-beam, left 15A 22 - Side marker and tail light, right 5A 23 - Side marker and tail light, left 5A 24 - Wiper and washer system 25A 25 - Blower for heating, climate control 30A 26 - Rear window defogger, mirror heating 30A 27 - Rear window wiper 15A 28 - Fuel Pump 15A 29 - Engine timing 30A 30 - Sun roof 20A 31 - Tail lights, cruise control, automatic transmission 15A 32 - Engine timing 20A 33 - Cigarette lighter 15A 34 - Engine timing 15A 35 - Trailer recptacle 30A 36 - Fog lights 15A 37 - Radio 20A 38 - Luggage compartment light, central locking system 15A 39 - Emergency flasher system 15A 40 - Horn 25A 41 - Anti-lock brake system (ABS) 25A 42 - Vacant 43 - Vacant

Apr 05, 2010 | 1998 Audi A4

3 Answers

Brake lights not working even though the brake peddle is pushed down The switch still goes in and out. Fuse box has some fuses missing. The fuse box does not have a desription on every plug of what it is...


Here are the numbers on your fuseblock and fuses coresponding to the number that is on your fuse block.
1-20 amp (yellow)
Hazard flasher
2-10 amp (red)
back up lights, A/C clutch cycling Switch
3-30 amp (green)
Power windows
4-30 amp (yellow)
A/C or heater blower motor
5-20 amp (yellow)
Panel Lights, Side marker lights, Park, Taillights, Clock & radio display Intensity, License & panel lights.
#6-10 amp (red)
Stoplight, buzzers, Anti-lock brake module
#7-15 amp (lt. Blue)
Tachometer, horn & Relay
#8-8 amp (yellow)
Power Door locks
#9-10 amp (red)
Radio
#10-10 amp (red)
Rear Wheel Anti-lock module, Turn Signals
#11-20 amp (Yellow)
Windshield wiper & washers
#12-15 amp ( LT. Blue)
Cigarette Lighter
#13-5 amp (tan)
Speed Control, warning buzzers, gauges, indicator lights
#14-5 amp (tan)
Time/delay relay & under-hood light, dome light, power mirrors, readio & clock Memory, Interior lights, reading lights
#15-blank
Not used
#16-4 amp (pink)
Radio Lights & overdrive switch light 1989-91, Cluster lights, Cigarette Lighter light & as tray light, Cluster lights, A/C & heater controls.
#17-relay
Hazard Flasher warning
#18-relay
Relay
#19-Circuit breaker
#20-relay
Turn signal Flasher
#21-buzzer
Warning
#22-Relay
Horn

Aug 04, 2009 | 1991 Dodge Dakota

1 Answer

Below the odometer it indicates no fuse,


The IOD fuse is missing or burnt out. IOD is "ignition off draw" which serves as the dome lights, radio memory, locks and other things powered with the key off.

Jul 30, 2009 | 2002 Chrysler PT Cruiser

1 Answer

Gauges, Power Windows, Auto Lamps radio interior lights dont work


Sounds like an ignition switch problem, maybe even at the key.

Jan 09, 2009 | 2002 Ford F350 Super Duty DRW Reg. Cab

Not finding what you are looking for?
2003 Chrysler PT Cruiser Logo

Related Topics:

300 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...