Question about 2000 Oldsmobile Bravada

1 Answer

How do i change back brakes on 2000 olds bravada same as front

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Oldsmobile Master
  • 2,984 Answers

If the rear is disc...here ya go!

Removal & Installation

  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove or disconnect the following:
    • 2/3 of the brake fluid from the master cylinder
    • Wheels
  3. Place a C-clamp around the outer pad and caliper; tighten the C-clamp until the piston is fully compressed in the caliper.
    • Top caliper retainer, and rotate caliper away from rotor
    • Inboard pad and retaining spring from the caliper
    • Outboard pad from the caliper
To install:
  1. Clean and lubricate the sleeves and bushing with silicone lubricant
  2. Install or connect the following:
    • Sleeves and bushings into the caliper
    • Clip the retaining spring onto the inboard pad and install the pad in the caliper
    • Outboard pad into the caliper
    • Caliper in position over the rotor and install the mounting bolts
    • Wheel and tire assemblies
  3. Refill the master cylinder and pump pedal to attain full brake pedal before Road-testing the vehicle.

Posted on May 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2000 oldsmobile bravada I changed the front brake line but now I have no brake fluid going to the back brakes. I have tried to bleed them but only a little fluid will come out. What's wrong?


Are you just opening the bleeder and letting it run out? If so have someone pump the brakes and hold the pedal while you open and close the bleeder don't let off the brake pedal until bleeder is closed . Repeat this process until only fluid comes out . You probably have to bleed both sides . Keep an eye on the fluid so the resivor doesn't run out then you'll have start all over.

Nov 09, 2014 | 2000 Oldsmobile Bravada

1 Answer

Changed my differential in 2000 bravada and the front axle shaft keeps coming unclipped from insde the differential....... please help


try either googleing that question or google olds bravada forums or you could try chevy s10 blazer as its the same thing

Feb 07, 2013 | Cars & Trucks

1 Answer

Average cost for replacing rear brakes on 2000 Bravada


labor rates and pricing vary greatly town to town state to state. You best option would be to call around your local area to see what the going rate is for a standard rear brake service and a couple of rotors.

Typically the rear caliper slides freeze and the calipers need to be replaced.

You can expect from $200 to $800 dollars depending on what you actually need.

Let me know if you have any questions and I'll be happy to help. Thank you for using FixYa.com!

Jan 28, 2012 | 2000 Oldsmobile Bravada

1 Answer

2000 OLDS BRAVADA FIRING ORDER DIAGRAM , WE CHANGED PRESSURE REGULATOR, NOW TRUCK FEELS AS IF ITS MISFIRING. WE ONLY REMOVED THE 3 SPARK PLUG WIRES ON THE RIGHT SIDE OF VEHICLE, IF LOOKING FROM THE FRONT.


For the Oldsmobile Bravada 4.3L V6:

Firing Order
:
1-6-5-4-3-2

Cylinders:
......(back)......
|..6..|.......|..5..|
|..4..|.......|..3..|
|..2..|.......|..1..|
......(front)

Distributor Connections:
...........(back)
Coil-> o
6-----> o.......o <-----5
4-----> o.......o <-----1
2-----> o.......o <-----3
...........(front)

Let me now if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Apr 25, 2010 | 2000 Oldsmobile Bravada

2 Answers

2000 olds bravada rear brakes are draging. changed brake hose's to calupers and the center hose as well. with new brake and rotors still draging not sure what to do next.


I also have this problem on my 2000 Bravada - replaced all rotors and back calipers, brand new brake pads, new system and my rear caliper STILL chewed up a brand new brake pad in one week down to the metal. Checking for an emergency brake issue at this point - if anyone has any suggestions about how to unhook the E Brake, please share!

Jan 13, 2010 | 2000 Oldsmobile Bravada

1 Answer

ABS light is on, brake pedal makes noise


sounds like the r/f wheel brg needs replacing when you are coming to a stop and you hear the pedal making noise does it pull slightley to the left this would conferm the r/f is the problem

Jan 02, 2010 | 2000 Oldsmobile Bravada

1 Answer

How do you change a thermostat in an bravada


how do i change my thermostat in my 1999 old bravada

Sep 19, 2009 | 2000 Oldsmobile Bravada

1 Answer

Grinding noise on 2002 Olds Bravada


Try making tight turns to the right and then to the left. see if the grinding noise comes and goes. It could be your C/V joint and they need to be replaced. The noise will only come when your making the tight turns, you don't have to go fast. Walking speed will do and you can hear it with the window open or someone walking beside the Bravada. Good luck and keep me posted. Be glad to help.

Jun 16, 2009 | 2000 Oldsmobile Bravada

2 Answers

On a 2000 olds Bravada the key wont turn off all the way


you need to replace the whole ignition switch assembly, the swtch may be secured with what you call shear bolts which may have to be drilled out, only you can decide if you are capable of doin this, new bolts should be supplied with the new swith, when you retighten the bolts, the heads will shear off when they are tight enough, the aim of these are to prevent theives making a quick ignition change to steal your car

Feb 16, 2009 | 2000 Oldsmobile Bravada

Not finding what you are looking for?
2000 Oldsmobile Bravada Logo

296 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...