Question about 1994 Isuzu Rodeo

1 Answer

Timing for 94 Isuzu; 3.2 litre? Trouble shooting on 94 Isuzu; 3.2 litre; 174,000 km.; no power; catalitic converter turned red; removed catalitic converter; it was o.k. and muffler o.k. - no blockage; running rich; removed spark plugs - left bank running rich and also misfired?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,309 Answers

You could be looking at a leaking injector, sprrk plug missfire, or exhaust valve not sealing

Posted on May 11, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


catalitic converter plugging , or the timing is way off

Feb 10, 2015 | 2002 Ford Mustang

1 Answer

Engine managment light as come on and going up hills lack of power

How many KM or Miles on vehicle, I have heard of the catalitic converter being plugged which can cause power loss and engine lights

Sep 05, 2012 | 2000 Hyundai Accent

1 Answer

Car starts no power in gear

sounds like your catalitic converter is stopped up,do you lose power the warmer the car gets?if so look under your car after uv run it, n see if your catalitic converter is glowing red.

Jun 20, 2012 | 2004 Nissan Altima

1 Answer

The after run the car for 2 miless or more the catalitic converter turns hot red and the the engine lose power and stops runing

The catalytic converter may be plugged up and in need of replacement, or too much unburnt fuel is entering the exhaust causing the catalytic converter to turn red hot due too much hydrocarbons being processed by the catalyst.

Good luck on this repair.

Jan 14, 2011 | 1996 Ford Thunderbird LX

1 Answer

The problem im having with the 93 rodeo is loss of power and it seems to be wasting lots of gas. ill start the truck up and after a few minutes i put into gear and apply brake then accelerate but the truck...

Check the catalitic converter.if you start it and the cat gets red hot after several minutes it is clogged. also start it and see if ti has any pressure coming out of the exhaust pipe. there should be plenty

Jun 22, 2010 | 1993 Isuzu Rodeo

1 Answer

I need a timing digram for a 1995 isuzu rodeo. i was told that the timing is off causing loss of power and poor fuel mixture

i need to know some things first.. you may not need the timming diagram. does your vehicle go still shift when you drive and does it go up hills at normal rate of speed or does it loos power and only go about 30 to 40 MPH. if this is what is happening than you need to check the catalitic convertor it may be clogged. my 94 suburban did this same thing and i replace hundreds of dollars worth of parts on it and nothing worked and this is what my problem was. you need to take the catalitic converter off or loos at the front of the engine and find out if this helps or fixes the problem.
please let me know

Aug 19, 2009 | 1995 Isuzu Rodeo

1 Answer

Accent 2001 won't start after driving for only 100km

you may want to see if your catalitic converter is clogged up. I had a car that had that problem, when you drove too much it would die and wouldn't start for a long time after that. I had the converter replaced and now it drives just fine. May not be the same problem but it could be. and most muffler shops will check for a small fee if not for free.

Nov 28, 2008 | 2001 Hyundai Accent

2 Answers

Crancshaft pullt jamming up

You must have #1 on TDC and the camshafts on the timing mark to fit a new belt , I rekon yer valves are fouling the piston .
Ignore the mark on the pump pulley .

Nov 25, 2008 | 1998 Isuzu Trooper

1 Answer

Holden 94 rodeo petrol

Good Day
Vale clearance cold
intake .006 in (.15 mm)
exhaust .010 in (.25 mm)

1. With transmission in Neutral or park, start engine and warm to normal operating temp. turn eng,and all accessories off. connect Tachometer. Connect timing light to no 1 spark plug wire.

2. Disconnect and plug fuel vapor canister purge hose and EGR vacuum hose. Start and ensure idle is 900 RPM. adjust idle as required. Check ignition timing ( 12 @ 900)

3. If adjustment is required, loosen distributor hold down bolt and turn until timing is within specification. Tighten distributor hold down bolt and recheck timing. adjust idle speed as required.

hope this helps


Aug 18, 2008 | 1994 Isuzu Rodeo

Not finding what you are looking for?
1994 Isuzu Rodeo Logo

Related Topics:

302 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts


Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14379 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides