Question about 1996 Oldsmobile LSS

1 Answer

Front driver headlight not working. just bought a new bulb

Talk to people they said it might be a electrical problem. was in a accident. it worked before now it doesnt wanted to know if their was anything i could do from home. kinda broke.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Try checking the fuses. I recently purchased a 96 Olds. 88 and it was wrecked on the right-front. Replaced the light and the fuse. I hope that helps.

Posted on Aug 23, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I have a 2007 Chrysler sebring and drivers low beams will not work.


try the fuses or wire fuse links , the only other thing in the circuit is the wires broken or the light low switch is bad

Nov 08, 2014 | 2007 Chrysler Sebring Sedan

1 Answer

Right lowbeam headlight out, bulb not bad


This is not a very reliable answer but my right headlight went out as we'll and before I bought a bulb I talked to different guys at work, they suggested giving the headlight a good solid tap on the outside and sure enough it came back on. Hopefully this might work for others as well!

Feb 22, 2013 | 2006 Nissan Altima

1 Answer

Removing low beam bulb on 05 subaruoutback


Whether they become damaged in an accident or simply burn out over time, your Subaru Outback's headlights may eventually need to be replaced. Fortunately, once you've purchased the right replacement bulb for your model year, performing the repair yourself is relatively easy. These instructions only apply to Outback models made after 2000.

  1. Undo the clips on the air intake ducts using a screwdriver and remove the duct from the engine compartment (driver's side bulb removal only.)

  2. 2

    Loosen the secured clip on the washer tank with a screwdriver and slide the tank horizontally to allow easier access to the headlight assembly (passenger's side bulb removal only.)

  3. 3

    Turn the bulb cover counterclockwise and remove it from the assembly.

  4. 4

    Disconnect the headlight electrical connector and undo the assembly retaining spring.

  5. 5

    Pull the old bulb directly out of the socket and replace it with the new one. Press the retaining spring back into place and reattach the electrical connector.

  6. 6

    Replace the bulb cover, and then turn on the engine. Test the new headlight to make sure it works before replacing the air intake duct or the washer tank and closing the hood.

    Replacing the High-Beam Bulbs
  1. 1

    Undo the clips on the air intake ducts using a screwdriver and remove the duct from the engine compartment ( drivers side bulb removal only.)

  2. 2

    Loosen the secured clip on the washer tank with a screwdriver and slide the tank horizontally to allow easier access to the headlight assembly (passenger's side bulb removal only.)

  3. 3

    Disconnect the headlight electrical connector and undo the assembly retaining spring.

  4. 4

    Turn the headlight bulb counterclockwise and pull it out of the socket.

  5. 5

    Reinstall the new bulb, replace the retaining spring and reconnect the electrical connector.

  6. 6

    Test the new headlight to make sure it works before replacing the air intake duct or the washer tank and closing the hood.

Sep 14, 2012 | Cars & Trucks

1 Answer

I recently had some front drivers side damage to my car. The head light was smashed and the wheel well pushed in far enough that it occasionally rubs against the wheel when I make right turns. I've managed...


Mr Pinske,

The rear running lights aren't on the same circuit as the headlight(s). To get the car legal for
night driving, replace the broken headlight (both need to work to drive legally at night),
and tackle the running lights as a separate project.
First thing to check on the running lights - the bulbs. Why: incandescent light bulbs that are
on at the time of an impact cannot withstand the impact and the filaments can fail, so fixing
your rear running lights may simply be a matter of replacing the two light bulbs.
If the bulbs are ok, your accident has caused a wiring fault, which you will locate
between the ignition switch and the rear running lights.
Here's the manual on how to replace the headlight:

1993 Buick Century
HEADLIGHT REMOVAL & INSTALLATION
Non-European Style
See Figures 1, 2, 3, 4 and 5
  1. Remove the headlamp trim panel attaching screws.

archaeology_17.jpg



Fig. 1: Remove the headlamp trim panel attaching screws

  1. Remove the headlamp bulb retaining screws. Do not touch the two headlamp aiming screws, (at the top and side of the retaining ring), or the headlamp aim will have to be readjusted.


archaeology_18.jpg


Fig. Fig. 2: Remove the headlamp trim panel assembly from it's mounting location

  1. Using a screwdriver, remove the retaining ring screws.
archaeology_19.jpg


Fig. 3: Using a screwdriver, remove the retaining ring screws

archaeology_20.jpg

Fig. 4: Once the retaining ring screws are removed, the ring can be pulled away

  1. Pull the bulb and ring forward then separate them. Unplug the electrical connector from the rear of the bulb.


archaeology_21.jpg


Fig. Fig. 5: Pull the bulb out and unplug the electrical connector
To install:

  1. Plug the new bulb into the electrical connector.
  2. Install the bulb into the retaining ring and install the ring and bulb.
  3. Install the trim panel.
Replacing the European style headlights is a slightly different procedure.

Mar 15, 2011 | 1993 Buick Century

1 Answer

Driver of vehicle had a fender bender DS headlight and other parts replaced. The low beams work but highbeams do not.


if you had an accident, you either need a new bulb OR the accident had shorted the connection... check fuse.

Feb 09, 2011 | 2006 Pontiac G6

1 Answer

The drivers side headlight does not come on while driving. It is not the bulb. When I lock the car with the remote both headlights flash so I know that it gets power to the bulb and the bulb is good. I...


(it does not say if you out a new bulb in or not) I would just put a new bulb in. On my 2005 Cobalt. I drivers headlight didn't work but, when I locked the car it worked and my daytime runing lights did work.. so when I pulled into my drive way one was out and when I turned the key off. it came on.. It turned out to be the headlight bulb. Hope this helps..

Nov 22, 2010 | 2005 Chevrolet Cobalt

1 Answer

96 camry headlight dont work


Headlights are one of the most important safety features on your car, but they can only do their job if they're properly maintained. It's not just burned out headlights that cause problems; headlights that are dim or incorrectly aligned can also lead to accidents. Fortunately, learning how to repair headlights is something even the least mechanically inclined person can do. When you know how to repair headlights yourself, you can save up to several hundred dollars on mechanic's fees. Here are some tips on how to repair headlights with common problems.

Headlights that don't turn on
If you're headlights aren't working at all, the most likely cause is a burned out bulb. All you need to do to repair the headlights is replace the bulb. If you have plastic lenses, you can take out the old bulb by removing the lens and unscrewing the bulb from the back of the lens. With glass headlights, though, you'll need to replace the whole glass. Since you're buying new bulbs anyway, consider picking up one of the new, brighter types of bulbs, such as the halogen or xenon types.
When you've got your replacement bulb, install it and turn on the lights. If the headlights still don't work, it's a sign of an electrical problem. Because electrical problems are relatively complicated to repair, take your car to a mechanic before you try to do anything else with the headlights.
This will help. Thanks please keep updated. please please do rate the solution positively .thank you for using fixya

Mar 18, 2010 | 1996 Toyota Camry

1 Answer

How do I change the Driver's side Front Headlight on the 1998 Plymouth Grand Voyager?


  1. Unscrew the three screws that secure the headlight assembly to your Dodge Caravan. Put the screws in your pocket or another safe place, so you won't lose them before reinstalling the headlight assembly.
  2. Pull the headlight assembly away from the front of the vehicle. Turn the bulb retaining ring counterclockwise to unlock the electrical connector. Remove the electrical connector from the bulb assembly by pulling it straight out.
  3. Replace the old bulb with a new halogen headlight bulb. Connect the electrical connector and turn the bulb retaining ring clockwise to lock the bulb into place.
  4. Reinstall the headlight assembly and secure the screws tightly before closing the hood. Turn on your Dodge Caravan, flip on the headlights and verify they're working properly.

Oct 16, 2009 | 1998 Plymouth Grand Voyager

1 Answer

Fender bender, bought new assembly. How to remove old for replacement? "89 seville driver side headlight.


LIGHTING Headlights REMOVAL & INSTALLATION
  1. Unscrew the Torx retaining screws and remove the headlight bezel.
  2. Remove the headlight bulb retaining screws. These are the screws which hold the retaining ring for the bulb to the front of the car. Do not touch the two headlight aiming screws, at the top and the side of the retaining ring (these screws will have different heads), or the headlight aim will have to be re-adjusted.
  3. Pull the bulb and ring forward, then separate them. Unplug the electrical connector from the rear of the bulb.
  4. Plug the new bulb into the electrical connector. Install the bulb into the retaining ring and then install the ring and the bulb. Install the headlight beze

Aug 23, 2009 | 1989 Cadillac Seville

2 Answers

Lightbulb driver side 2008gmc 3500 6.6l


how to change driver side headlight bulbs?

May 30, 2009 | 2008 GMC Sierra 3500HD 2WD

Not finding what you are looking for?
1996 Oldsmobile LSS Logo

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...