Question about 1990 Toyota Camry
How do I replace interior door handles on a 1990 Toyota Camry?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There's two screws by the handle, pull those out and you'll see how it all connects on the inside. I was able to remove my broken one, and drill a hole into the plastic where it broke and reuse it - it's lasted over 4 years now.
Posted on Aug 12, 2008
My 96 Camry LE has 9 attachments that are visible. Some have plastic caps covering the screws; others do not. There are screws at the door handle, at the forward portion(with covers) when the door is open and the back edge (small covers). As I recall, there are several friction type fasteners around the perimiter of the panel that can be removed by prying carefully away from the metal portion of the door to free up the trim panel. Once these are loose, the trim around the inside door release handle (the one you pull to open the door) can be pryed in a backward motion. Then the entire panel can be removed by pulling upward and backward at the same time (it easier to do this with the window down). Then it is a matter of disconnecting the wires attached to the various controls for the electric windows and door locks to free up the panel itself. There is probably a plastic skin covering the metal portion of the door. Carefully pull that away to expose the inner workings of the door latch mechanisim. The rest of the procedure should become easy to figure out. I have not removed the exterior door handle itself; but it is a simple mechanism as I recall. Best of luck to you.
Posted on Mar 04, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If it's the inside handle, just disconnect the rod to the back of the handle to replace it. If it's the outside handle, pull back the weather seal and you'll be able to remove the bolts holding down the outer door handle
Posted on Sep 14, 2009
Testimonial: "thanks got the job done ....very good "
Tips for a great answer:
Mar 21, 2010 | 1990 Toyota Camry
Mar 07, 2010 | 2001 Toyota Camry
Feb 13, 2010 | 1995 Toyota Camry
Dec 31, 2009 | 1990 Toyota Camry
Nov 07, 2009 | 2001 Toyota Camry
Oct 06, 2009 | 1990 Toyota Camry
Sep 04, 2009 | 1995 Toyota Camry
Aug 03, 2009 | 1998 Toyota Camry
Feb 14, 2009 | 1995 Toyota Camry
158 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: