Question about 1997 Dodge Ram 1500 Club Cab

1 Answer

How do I tell what type of transmission is in my 1997 Ram1500 with a 5.9L V8 eg.42RE 46RE 47RE?

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

There should be a sticker on the underside of your hood which lists transmission, axle(s), paint code, and so on. It may need a little cleaning to be readable.

Posted on May 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Can I put a 42RE Transmission from a V6 Dakota into my V8 that currently has a 46RE?


The transmissions are the same and can be interchanged. Remember to change the bell housing from the old to the new so the bolt patterns match up to the v8.

Mar 04, 2015 | Cars & Trucks

1 Answer

Will the 42re4 from 2000 wj have the same electronic plugs as a1999 wj


did you look at the parts page? (at the least the plug, huh)
jeep.com list both as different. buying whole transmission.
call the wrecker and ask for hollander lookup on compat?

here is one seller on ebay that show campat
buy the harness and see capat,

http://www.ebay.com/itm/Transmission-External-Wire-Harness-Repair-Kit-Splice-In-42RE-44RE-46RE-47RE-48RE-/331364693032?pt=Motors_Car_Truck_Parts_Accessories&hash=item4d26dff428&vxp=mtr

"A500 , 42RE1993 Up"
A500 , 44RE1996 Up
A518 , 46RE1996 Up
A618 , 47RE1996 Up
48RE



Jan 12, 2015 | 1999 Jeep Grand Cherokee

1 Answer

Transmission fluid capacity for a 1998 dodge ram 1500, V8


Transmission Fluid

42RE .................................................. 8.0-10.4L (8.4-11.0 Qt)
46RE .................................................. 9.0-11.0L (9.5-11.6 Qt)
47RE ................................................ 14.0-16.0L (14.8-16.9 Qt)

Jun 15, 2012 | Dodge Ram 1500 Cars & Trucks

1 Answer

I am trying to find out what transmissions will fit my 94 jeep grand cherokee


The 4.0L six-cylinder models have either a 42RE or a 42RH transmission. The 5.2L V8 models have either a 44RE, 46RH or 46RE transmission.

How to identify... e
very trans they made and what they put them in... jeeptech.com/trans

Hope helps.

Nov 03, 2010 | 1994 Jeep Grand Cherokee

1 Answer

What transmission is in a 1998 jeep grand cherokee laredo


What engine? It could have two different transmissions in it 4.0 usually has a 42re trans and 5.2 usually has a 46re. The 42re has a rectangular pan and the 46re pan is shaped the same but has a protruded edge of the pan on the drivers side front edge.

May 19, 2010 | 1998 Jeep Grand Cherokee

2 Answers

What transmission is in a 1997 dodge ram 1500 with a 360


If it is 2 wheel drive, than it is a 238-2 tranny

- 42RE with the 3.9L V6
- 46RE with the 5.2L and 5.9L V8
- 47RE with the 8.0L V10 and 5.9L Cummins diesel

(238 is the cubic inch displacement of the 3.9L V6.)

Sep 16, 2009 | 1997 Dodge Ram 1500 Club Cab

2 Answers

I have a 94 cherokee limited 5.2 v8. which transmissions are come


The 46rh is a hydraulic transmission as where the 46re is an electric transmission. With minor wiring you can replace the 46re with the 46rh but not the other way around. Your transmission would stay in limp mode and wouldn't shift out of 2nd gear. So the answer is no.

Aug 23, 2009 | 1994 Jeep Grand Cherokee

1 Answer

Jeep grand cherokee revs for to high before changing gear


Message:
My 2002 Dakota has been somewhat confused about shifting as well. It showed a code P1762. I dropped the pan to install a new fluid filter and fluid-(use only ATF+3 or ATF+4). Since the pan was off I decided to adjust the bands. The front band controls the 2nd gear cluster. The rear band controls the 3rd gear cluster and reverse. For a 2-3 shift, the transmission shifts back to 1st gear with the front band while the rear band engages 3rd gear. If the front band does not release the 2nd gear clutches before the third gear clutches engage, the transmission binds, which shortens the life of the transmission clutches. If the front band releases too early in the shift, the engine will overspeed (sounds and feels like a slip) during the 2-3 shift.
The front band adjusting screw is on the driver's side above the shift linkage. The rear band is inside the fluid pan near the filter.
1. Loosen band adjusting screw locknut. Then back locknut off 3-5 turns. Be sure adjusting screw turns freely in case. Apply lubricant to screw
threads if necessary. The front band adjuster is on the outside of the transmission and the locknut requires a 3/4" wrench.

2. Using Inch Pound Torque Wrench C-3380-A, a 3-in. extension and appropriate Torx� socket (T-40), tighten adjusting screw to 72 in-lb. CAUTION: If Adapter C-3705 (from SPX Miller) is needed to reach the adjusting screw, tighten the screw to only 47-50 in. lbs. torque.

3. Back off adjusting screw the number of turns listed below for your transmission.

4. Hold adjusting screw in place and tighten lock-nut to:

41 N�m (30 ft. lbs.) for the front band
34 N�m (25 ft. lbs.) for the rear band
The adjustment screw inside the case is a square head bolt. You will need a 1/4 square head socket to fit your torque wrench.
Band adjustments for each model year:
1994

* Front Band - tighten to 72 in-lb, back off 2-1/2 turns (all transmissions)
* Rear Band
o 32/42RH - Tighten to 72 in-LB, back off 4 turns
o 36/37/46/47RH - Tighten to 72 in-lb, back off 2 turns

1995-1996

* Front Band
o 42RH - tighten to 72 in-lb, back off 2-1/4 turns
o 46RH - tighten to 72 in-lb, back off 2-7/8 turns
o 47RH - tighten to 72 in-lb, back off 1-7/8 turns
* Rear Band
o 42RE/RH - tighten to 72 in-lb, back off 4 turns
o 46RE/RH - tighten to 72 in-lb, back off 2 turns
o 47RE/RH - tighten to 72 in-lb, back off 3 turns

1997-1998

* Front Band
o 42RE - tighten to 72 in-lb, back off 3-5/8 turns
o 46RE - tighten to 72 in-lb, back off 2-7/8 turns
o 47RE - tighten to 72 in-lb, back off 1-7/8 turns
* Rear Band
o 42RE - tighten to 72 in-lb, back off 4 turns
o 46RE - tighten to 72 in-lb, back off 2 turns
o 47RE - tighten to 72 in-lb, back off 3 turns

1999

* Front Band
o 42RE - tighten to 72 in-lb, back off 3 turns. (TSB 21-16-98)
o 47RE - tighten band adj. screw to 72 inch pounds, back off 1 7/8 turns
* Rear Band
o 47RE - tighten band adj. screw to 72 inch pounds, back off 3 turns
+ The 47RH rear band requires a 1/4" hex driver, the front band requires a
T-30 Torx driver, the filter is held in place by two screws which require a T-20 Torx drive

2000-2002

* Front Band
o 42RE - Tighten band adj. screw to 72 in-lb, back off 3 turns
o 44RE - Tighten band adj. screw to 72 in-lb, back off 1 7/8 turns
o 46RE - Tighten band adj. screw to 72 in-lb, back off 2 7/8 turns
o 47RE - Tighten band adj. screw to 72 in-lb, back off 1 7/8 turns
From Bill Konolday's 47RE notes: I usually go a little looser than factory
specs on this front band - backing off the adjustment screw 2 or 2 1/4 turns.
Depending on the circumstances I have backed off the band up to 2 1/2 turns.
* Rear Band
o 42RE - tighten band adj. screw to 72 inch pounds, back off 4 turns
o 44RE - tighten band adj. screw to 72 inch pounds, back off 4 turns
o 46RE - tighten band adj. screw to 72 inch pounds, back off 2 turns
o 47RE - tighten band adj. screw to 72 inch pounds, back off 3 turns

2003

* Front Band
o 48RE - tighten band adj. screw to 72 inch pounds, back off 1-3/4 turns
* Rear Band
o 48RE - tighten band adj. screw to 72 inch pounds, back off 3 turns

2005

* Front Band
o 48RE - tighten band adj. screw to 72 inch pounds,
back off front band adjusting screw 1-3/4 turns for diesel vehicles,
or 1-1/2 turns, for V-10 vehicles.
* Rear Band
o 48RE - tighten band adj. screw to 72 inch pounds, back off 3 turns

94+ Automatic Transmission Bolt and Nut Torque Specs

* Front band adjustment locknut - 30 ft-lb
* Rear band adjustment locknut - 25 ft-lb
* Transmission pan bolts - 13 ft-lb
I just replaced the solenoid with the recommended transducer and all is fine now. The transducer cost me about $50 at a nearby dealership.
Hope this helps. -zman. rroszman@yahoo.com

Dec 09, 2008 | 2001 Jeep Grand Cherokee

2 Answers

Transmission


Transmission
Typo and model:
1.- 4-speed automatic AW-30-40 (6cil start of 1993)
2.- 4-speed automatic 42RE ( 6cil 1993)
3.- 4-speed automatic 46RH ( V8, 1993-1995)
4.- 4-speed automatic 44RE ( 5.2L V8, 1996)
5.- 4-speed automatic 46RE ( 5.9L V8, 1998)
6.- 5-speed automatic 45RFE( 4.7L V8, 1999 in WJ)

Enter the VIN in here: http://jeep.avtograd.ru/VIN/vin_en.asp

Also cHeck this info: http://www.jeep.com/en/4x4/systems_by_vehicle/

Good luck!!!

Dec 05, 2008 | 1993 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

323 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...