Question about Isuzu Rodeo

1 Answer

There is a strange grinding/knocking noise coming from front of car.You can hear it only on start up and travelling at slow speeds. It seems to be more noticable from inside the car. The vehicle is a 2002 Isuzu Wizard V6 Petrol

Posted by on

  • frugalvance May 11, 2010

    It sounds like it is more under the bonnet

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,489 Answers

Double check the rims and make sure that no wheel weights are hitting the brake caliper. It could also be a worn wheel bearing. Raise the front the vehicle and grab the top and bottom of the wheel and shake to inspect for excessive play. Check the axles for anything rubbing against the hub. Let me know what you find.

Posted on May 11, 2010

  • Kori Policy
    Kori Policy May 11, 2010

    I would look at the pulleys that are driven by the belt. It very could be a tensioner or perhaps an component going bad. One thing you can do if there is nothing visable or obvious, remove the belt and see if the noise go away. Does the noise increase when accelerated at a standstill, in neutral?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Micra K13 Loud Noise at Higher Speeds


I've just bought a K13 Nissan Micra and it doesn't sound quite right. The noise I hear also seems to be coming from the back but it sounds like when you chop down a gear in a manual going down a hill and the engine revvs, well this is the noise I get in the automatic speeding up and slowing down, even just cruising at a steady speed. Any ideas people? Apart from this noise I love this car.

Aug 20, 2012 | Nissan Cars & Trucks

1 Answer

97 honda accord knocking and grinding noise in front end


i have a 1997 honda accord ex. i have a knocking noise in the front end up to 25mph and goes away until you hit about 55mph then it comes back but it also goes away with the slightest turn of the steering wheel. what could this be? please help me, i been stuck on this for 5 days now. thanks.

Apr 17, 2012 | Cars & Trucks

1 Answer

I hear a knocking nosie in the front of the car and it stops when i reach about 50 miles per hour and will start again when i slow down or stop at a light or stop sign. the cv joint has been replaced on...


so the noise changes with vehicle speed and NOT engine speed?

did they also replaced the intermittent shaft and bearing

however, this cause more of a humming noise than knocking

therefore start looking at transmission concerns

May 07, 2010 | 2000 Dodge Intrepid

1 Answer

Squeaking/grinding noise when turning the wheel


Are the front brake pads ok? Some have squeal indicators, it is a tin plate that touches the disc (without damaging) to warn you that the brakes are worn. On the initial stages it will happen more so on slow cornering but will quickly get louder over a matter of days.
Check the pads for thickness, should be min 6mm

Jan 09, 2010 | 2001 Dodge Stratus

1 Answer

There is a noise from the front end of my 2001 odyssey which became noticeable about 400 km ago. It started out as a clicking/knocking sound and is cyclical with wheel/driveline rotation/speed and would be...


it sure sounds like wheel bearings, however, the clicking/knocking sound is more related to the cv joints.
If the spindle nut was loose, it would account for a knocking sound/feel as well. Have the bearings checked before you spend crazy amounts on cv joints.

Nov 22, 2009 | 2005 Honda Odyssey

1 Answer

95 ford explorer, grinding noise/vibration at slow speeds.


CHECK YOUR UNIVERSAILS COULD BE WORN OR DRY U NEED TO PULL OUT THE SHAFT TO CHECK PROPLEY CHECK FOR STIFFNESS AND NOTCHEY MOVEMENT

Dec 16, 2008 | 1998 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...