Question about 2001 Hyundai Elantra

1 Answer

+ Battery cable replacement 1999 Hyundai Elantra

How to remove positive battery cable on a hyundai elantra. I know to disconnect from battery, then from the starter. Is there anything that is complex in doing these two steps? anything in the way? can i do this at home?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hyundai Master
  • 14,036 Answers

Make sure your radio and ignition switch is off.first you disconnect negative cable first then the positive cable.then you replace new positive battery cable first then you hook the negative battery cable back up last.

Posted on May 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Is there a way to reset the alarm in a 2005 Hyundai Elantra


Bill, alarm reset procedure. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
how do you start disable alarm on elantra with no fob only the key Hyundai...
How to Reset Factory Car Alarm
https://answers.yahoo.com/question/index?qid=20090131072012AAj89Wh

Aug 27, 2016 | 2005 Hyundai Elantra

2 Answers

04 hyundai elantra positive battery cable needs to be replaced any instructions or tips?


Yes, just in case you have a theft deterrent system, do not leave the battery cable disconnected longer than 30 minutes as that will cause your radio to loose its smarts and not be able to turn on.

Apr 05, 2011 | 2001 Hyundai Elantra

1 Answer

My hyundai elantra needs a new fuel pump. does it have to be replaced professionally or can i do it myself?


From www.hmaservice.com

REMOVAL 1. Remove the rear seat cushion. 2. To reduce the internal pressure of the fuel lines and hoses, first start the engine and then disconnect the electrical fuel pump connector. Be sure to reduce the fuel pressure before disconnecting the fuel main pipe and hose otherwise fuel will spill out.

v5fl009a.gif 3. Disconnect the battery cable from the negative terminal of the battery. 4. Remove the high pressure hose and fuel return hose. 5. Remove the fuel pump assembly


Feb 04, 2011 | 2000 Hyundai Elantra

1 Answer

Can you please describe how to install a cd player in a 96 Hyundai Elantra?


Disconnect the negative battery terminal to prevent
an accidental short circuit. Pop out the dimmer
switch panel and remove (1) Phillips screw
exposed. Unsnap the gear shifter trim plate and
remove (1) Phillips screw exposed at the base of
the dash trim bezel. Reach under the driver's
side dash, locate the temperature control cable
and remove the cable from the white plastic
bracket. Position the gear shifter in low, pull the
dash panel away and disconnect all wiring harnesses.
Remove the trim bezel (the temperature
controlcable will be attached). Remove (4)
Phillips screws securing the factory head unit
and disconnect the wiring.

Feb 07, 2010 | Hyundai Motor 1996 Elantra

1 Answer

How to replace 2004 Hyundai Elantra starter


First, disconnect the battery. Then the only part that needs to be removed to access the starter is the rubber air plenum boot between the throttle body and the air filter housing. This allows enough room to get an arm in there to access the 14mm bolts that attach the starter to the transmission. After removing the bolts, the starter can be removed from underneath the car. lower it down as much as possible, and unbolt the power cable. You may have to twist and turn it a bit to get around the support between the engine block and intake manifold, but it will come out.

Feb 05, 2010 | 2004 Hyundai Elantra

1 Answer

How to replace the battery cables on a 1999 hyundai elantra


GET THE NEW ONES first and then as you take the possoff replace it with the new one and the same with the earth cable (the BLACKone) fit to same bolts ..
But take off the black term first and then do the red cable when on,, then you do the black one.

Oct 13, 2009 | 2001 Hyundai Elantra

1 Answer

How do you replace the cigarette lighter in a 2001 hyundai elantra?


The panel in which the lighter socket is mounted has to be removed.
The socket is held in place by a sleeve which screws onto the body of the socket from the back of the panel. Removing this sleeve will allow the socket to come out. When you do this, make sure negative battery cable is first disconnected.

If you need help removing the panel, please let me know.

Charlie

Oct 01, 2009 | 2001 Hyundai Elantra

1 Answer

How to replace an alternator on a 2000 hyundai elantra


CAUTION: Some models are equipped with anti-theft-radio make sure you have the activation code before disconnecting battery

  • Relieve the fuel system pressure
  • Disconnect the negative battery cable
  • If necessary remove the air cleaner assembly
  • Remove the clips and detach the hoses from the fuel filter then remove the filter bracket nuts and lift the assembly out of the engine compartment

Jun 11, 2009 | 2000 Hyundai Elantra

1 Answer

How to replace the revese light of hyundai elantra 2003


1. Disconnect the negative (-) battery terminal. 2. Remove the nuts holding the rear combination lamp. 3. Disconnect the connector and remove the lamp assembly.

It is located in the trunk, behind the furthest rearward panel. (right inboard of the light housing).

May 02, 2009 | 1993 Hyundai Elantra

1 Answer

A month ago I bought A used 2000 elantra it used to start fpr the first try In the same time I changed the engine oil and Trying to put a good battery when I finished it did not start.


Verify (test) the battery is good/charged. Verify good, clean cable connections (positive & negative, correct polarity). Inspect positive and negative cables for loosness (positive cable condition to starter connection - clean/tight) negative cable condition to ground connection clean/tight). Replace/repair/clean/tighten cable(s) as needed. Did you remove/disconnect any components from the engine when you replaced the battery? If so, did you remember to put/reconnect them back?

Apr 22, 2009 | 2000 Hyundai Elantra

Not finding what you are looking for?
2001 Hyundai Elantra Logo

622 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

79186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...