Question about 2003 Hyundai Santa Fe

1 Answer

How to replace a valve cover gasket 2003 hyundai santa fe

I'm look for diagrams of how to replace a valve cover gasket 2003 hyundai santa fe

Posted by on

  • Anonymous Mar 27, 2014

    labor guide. how many hours to replace

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 333 Answers

Just take a picture of it with digital camera or phone. And start removing wires and hoses until they are all out of way of cover. Then remove the bolts all way around cover and pull straight up and it will come right off. If not use a flat head screw driver to prise it off. Clean old gasket off of valvecover and engine. then put it bak together. Tighten bolts slowly, start with ones in center ov it and work your way out. Just finger tight. Then snug, then torque em down. Not too tight as if tostrip the bolt or break it off. Cause it be very expensive. also write down everywhere each wire go's unless you can remember

Posted on May 11, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is location of camshaft sensor on a 2001 Hyundai Santa Fe with a 2.7 v 6 motor


The Cam sensor is on the drivers side and in the front of the valve cover gasket it should have 3 wires headed into as well hopes this helps
/uploads/images/location-camshaft-sensor-2001-hyundai-35069396-3-1.jpg

Feb 24, 2015 | 2001 Hyundai Santa Fe

1 Answer

I need a diagram for the timing marks on a 2003 santa fe. Can you help me?


This is a common issue and the fix is on this site already. When this link:

Questions Answers for Hyundai Santa Fe timing marks diagram

Feb 09, 2015 | 2003 Hyundai Santa Fe

1 Answer

Oil leaking from rear valve cover gasket & getting burnt oil smell thru air vents inside vehicle


Thi depends on whether you want to do it yourself or not. It's an easy fix, just get the gasket and remove the valve cover. It's tidious but doable. Otherwise, get ready to spend $150-200 for a shop.

Mar 07, 2014 | 2003 Hyundai Santa Fe

1 Answer

Egr valve replacement diagram. cant find location of part on engine


her is a forum with a similar reqeust. you may be able to find information at the hyundai site this gentleman suggests.

http://en.allexperts.com/q/Hyundai-Repair-815/2003-Santa-Fe-2-2.htm

Jun 07, 2010 | 2003 Hyundai Santa Fe

1 Answer

Where is the PCV valve on 03 Hyundai Santa Fe, 6 cyl? Thanks


Open the hood, as you face the engine it is located on the L/H aft side of the forward valve cover. There is a exhause gas rubber tube going into it. It should be black in color.

Dec 31, 2009 | 2003 Hyundai Santa Fe

1 Answer

How to change blower motor in a 2003 hyundai santa fe


try these two websites www.alldatadiy.com and www.autozone.com and you should be able to get pictures and diagrams showing you how to repair your truck

Aug 02, 2009 | 2003 Hyundai Santa Fe

2 Answers

2.4l santa fe spark plug location


there are 2 covers that are over the plugs the first is the big silver and black cover that has four
10mm bolts remove them and then there is a small black cover that is inbetween the two humps on the valve cover i think that there 6 bolts that holdthat down remove this and the coils and plug wires are visable

Apr 12, 2009 | 2003 Hyundai Santa Fe

Not finding what you are looking for?
2003 Hyundai Santa Fe Logo

1,358 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8274 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...