Question about 2001 GMC Yukon XL

1 Answer

Door pins - 2001 GMC Yukon XL

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,309 Answers

Go to popular mechanics auto shop and look up door pins or hinge pins

Posted on May 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove door bushings


The only door bushings I am aware of are the ones on the hinge pins. Correct? If not, please clarify what you mean.
New pins come with new bushings, and the hinges are welded on so the pins are pretty much the only items replaceable. Not a fun job - because of the door stop springs you will need a spring compressor, and you will also need a special tool to drive out the old pins. However, both are available from a parts store or Amazon.
Just open the door and support it from the bottom, and then go for it, one pin at a time - for the upper pin, compress and remove the small spring, drive out the old pin, drive in the new pin and put the spring back. No spring on the bottom hinge - just replace the pin.

Apr 02, 2014 | 2000 GMC Jimmy

1 Answer

How do yoiu get the door hindges off of a 89 chevy 1500


To get the door off you have to take out the door pins. The top pin goes in upwards and the bottom pin downward. Make sure you put a jack under the door frame to ease pressure on the pins. Tap pins lightly to remove them. Just like a house door. You will need new bushings. If you find that the bushings are not fitting snug to the hinge, loose, you may need to drill the hole out a bit bigger, and use an over sized pin and bushing to replace it. Good luck, I hope this helps, please rate this solution

Jan 11, 2013 | 1989 Chevrolet C1500

1 Answer

How do I replace the long screw that holds the door up on the door hinges,on a '97 gmc Sonoma?


I have done a 100 of these.

The hardest part is going to be to reinstall the spring on the lower hinge arm. this is not a screw but rather a pin.
There are two hinges that hold the door to body.
when the upper and lower pins are removed the door will come away from body, it is important that before you remove the pins you take a look at the hinges.
Pay close att. to the way the hinges sit inside each other and the way the pins go in. see if they go from top to bottom or from bottom to top. also note where the copper bushings sit in hinges. each hinge has one pin and two copper bushings top go into hinge.
Over time the pins and bushings wear out ,making door hard to open and close. When the pins and bushings get so bad that the bushing is worn out and then the pins are now wearing into the hinge hole itself then this get tricky. if hinge hole is egg shaped the new bushings will not last. the door will hang again in a few weeks. this is where is get costly, the hinges now need replacing. i have gotten good at welding the holes and filing them back to shape but this takes skill or hole will be wrong and bushing will not fit or line up.

Here is a youtube video to help you.
Take note. put jack stands under door with cloth to avoid scratching door.this is to hold door when pins are removed. have somone help you, they will hold door on stands. the wires will still run through door, pull door away from body a little to allow room to work.remove the spring, it will fall out as you remove pins, remove old bushings, clean hinge area and holes,next install new bushings, apply lube to holes for pins and on bushings, slide door back on frame hinges and install pins, next slide lock washers on pins to hold pins. last is the spring. you will need a spring tool, you may rent one at auto parts store. hope this helps good day.

Feb 26, 2012 | 1997 GMC Sonoma

1 Answer

Need instructions on replacing drivers side door hinge pins and bushings


  • 1. Place masking tape on the inside edges of the door, on both the inside and outside of the door. 2. Remove the door spring by using a door spring removal tool. Insert the tool into the door spring, turn the knob with a screwdriver to compress the spring, then pull out the tool. 3. Set a 5-gallon bucket under the door. This will help support the weight of the door. 4.Place a nail punch under the hinge pin, and strike it with a hammer. Repeat this until the hinge pin begins to come out of the hinge. 5.Place the end of a flat-head screwdriver under the top of the hinge pin, then strike the screwdriver with the hammer to force the hinge pin out of the hinge. 6. Place the bushing on top of the new door hinge pin, and tap it into place with the hammer. 7. Insert the new hinge pin into the hinge. Tap on the hinge pin with the hammer and nail punch to force the pin into the hinge. 8. Insert the hinge spring back into the door, and release the tension on the spring removal tool. 9. Spray the door hinge with a lubricating spray or apply grease.

    I know there are a few directions but it is fairly easy to do. If you have access to an air hammer and a compressor you can use this in place of a manual hammer to make the process a bit easier.

    Hope this helps.


  • Mar 10, 2011 | GMC Sierra 2500HD Cars & Trucks

    1 Answer

    Driver door has dropped about 1/2". I see a torx


    Before attempting to adjust the door, you need to check the wear on the hinge pins. Open the door fully and look at the middle of the hinge. See the pin there? Lift up on the latch side of the door as you watch the hinge pin. If you see the hinge moving around the pin or see the pin shifting back and forth then the metal grommet the pin goes through is worn and needs replacing. Motormite makes a replacement pin set that comes with new grommets ( or bushings to some). It's not so hard to change, but it can be a little tricky. Jack up the door to relieve the pressure on the pin.Start with the top pin. Watch the pin as you jack and keep going until the pin is in the middle of the movement range. Tap the old pin out and then inspect the grommet to see if it's worn past the outer edge of the metal. If it is worn past the edge then you'll need to replace that hinge. Otherwise, you can use that old pin to tap out the old grommet, and replace with the new one, then the new pin. slowly release the pressure on the jack and watch the new pin for excessive movement, then do the bottom pin and grommet.. Test door swing and alignment. If the door still hits low on the catch post, loosen those torq bolts after lifting the door slightly and now lift the door the distance it was low plus 1/8 inch. retighten torq bolts and release jack, then retest the door alignment to the catch post. Don't let the door strike the catch post hard - just let it slowly come into contact as you watch for alignment. Repeat procedure until door lines up centered on taht catch post.
    Good luck!!

    Nov 07, 2010 | 2001 Dodge Durango

    1 Answer

    The drivers door hinge pins are loose allow the


    Some local auto parts have replacement door/hinge pin-kits for Ford products. (If not order from your local Ford dealer) The pins may need heated with a torch and driven out with a long spline pin punch. You might want to get a mechanic to do this for you.

    Mar 15, 2010 | 1997 Lincoln Town Car

    1 Answer

    Diagram of the door pins


    AUTO PARTS STORES NOW CARRY REPLACEMENT DOOR PINS. A DIAGRAM SHOULD NOT BE REQUIRED AS THE DOORS IN HELD IN THE HINGE BY METAL DOWELS WHICH WE CALL PINS

    Mar 13, 2010 | 1992 Pontiac Firebird

    1 Answer

    I need to replace side mirror on the passenger side,but not sure how to remove door panal to getto the plug


    First roll down the window and remove the inside mirror cover the remove the push pins in the back of the door panel ( push the center in to the 1st click then remove the pin from the door panel . With the pin out of the door panel push the center pin back out of the push pin retainer so it will be ready to go back in)Then remove the screw cover behind the door pull (just pops out) remove the 2 screws . Use a door tirm tool to release the push pin retainers that hold the trim to the door and lift the door panel up and off the top edge of the door . disconnect the elec connectors.

    Feb 23, 2010 | 2006 Chevrolet Malibu

    2 Answers

    Pin for driver side door bottom hinge pin seems to have lost the bottom part of the pin, what is the easiest way to replace the pin?


    door pins are available at dealer and part store

    to change you have to remove the door from truck and change the pins

    Jul 09, 2009 | 2002 Chevrolet Blazer

    3 Answers

    Remove jeep door


    You just need to use a small drift pin punch to push the door pins out. Use a small drift pin punch and a small hammer to drive the pin up and out from the bottom. It is just stuck in the hole.

    Mar 17, 2009 | 2003 Jeep Wrangler

    Not finding what you are looking for?
    2001 GMC Yukon XL Logo

    Related Topics:

    57 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top GMC Experts

    yadayada
    yadayada

    Level 3 Expert

    75066 Answers

    Freddy

    Level 3 Expert

    1311 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Are you a GMC Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...