Question about 2001 Mitsubishi Eclipse

Open Question

Need to have daytime running lights on my 2001 eclipse how do I get original lighting to work

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 13 Answers

SOURCE: Daytime running lights

the light sensor that tells lights when to come on that is located on dash is having problems

Posted on Aug 09, 2008

  • 62 Answers

SOURCE: daytime running lights override all other lights

Check and see if all your high and low beam bulbs work, if one is burned out that will cause problems. Then check the DRL resistor that is located in front of the drivers front tire below the headlamp. It will most likely be in two or more pieces and need to be replaced. Go see a saturn dealer and tell them you need the DRL resistor they should know exactly what you need.

Posted on Dec 17, 2008

handybc70
  • 25 Answers

SOURCE: Daytime Running Lights on 2005 Equinox

Hiya...if the green headlight logo in the instrument panel flashes a few times then went out, it indicates one of the low beam headlight lamp has burnt out.
It need a new headlight bulb...check it by turning the headlight on 'low' and see which one is burnt out is the one that need to be replaced.
You could replace it yourself by removing the 4 black plastic clips that holds the top grille brackets on the top(by the top radiator frame area), take the 3 bolts off the headlight brackets then slide your hand to gain access behind the grille/headlight to change the lightbulb--it's tight so do it with care.
Or you can take it in your local garage to do it.
The odometer bulb is burnt out as well so it require removal of the speedometer/instrument panel face off and locate the bulb inside...if you are brave to handle this repair yourself with your tools, try it or have the garage do it for you..your choice.
Take care!

Posted on Feb 02, 2009

  • 2 Answers

SOURCE: changing daytime running lights

give it some time.

Posted on May 03, 2009

emissionwiz
  • 75822 Answers

SOURCE: daytime running lights and blinkers do not work

the lights are controlled by a module, it is the DRL module, replace it. also try this
On the inside of the car next to the light switch there is your dome light button. GM made it to where you could turn off the daytime running lights by pushing it three times in and out. Turn the vehicle on then do this. Your daytime running lights should work after this.

Posted on May 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need help locating the drl microprocessor in my 2001 Pontiac sunfire


Pontiac Sunfire Questions - Daytime Running Lights ...

www.cargurus.com > Questions > Pontiac > Sunfire

CarGurusJul 22, 2009 - Daytime Running Lights - Relay clicks and then DRL shuts down. ... housing piece, but I couldn't seem to find any store or dealer to locate the specific part. ... The same EXACT thing is happening in my 2001 Pontiac Sunfire.Missing: microprocessor

Where is the DRL Module on a 2003 Sunfire? - Fixya

www.fixya.com/cars/t2791740-drl_module_2003_sunfire
Aug 24, 2009 - My wife's 2003 sunfire has a problem with the day time running lights and ... Your instrument cluster has a microprocessor which energizes the relay. .... Daytime Running light Module and relay on a 2001 Pontiac Sunfire GTX ...

DADRL - How To Disable DRLs


Jan 08, 2016 | 2001 Pontiac Sunfire

1 Answer

Fitted hid headlights now driving lights dont work


The problem with HID lights is that they require 12 volts or more to work. Daytime running lights on require 6-9 volts from the module. So when the original lights are replaced, the daytime running lights will not supply enough voltage to the HID ballasts to turn them on. The result? No Daytime Running lights. Another alternative is to purchase LED strips and place them around your headlights with a fused accessory power from the ignition switch. When the car is on the strips light up and you have Daytime Running Lights!

Jun 20, 2012 | Cars & Trucks

1 Answer

We have a 2001 Saturn SC2. When we turn the key on, a flashing headlight looking thing shows up on the left side and we don't know what this means. We cannot find the manual.


Hi:) That is a indicator light for the daytime running light's check the daytime running light's and make sure they are working it should be on till you put the headlight's on.

Mar 04, 2011 | 2001 Saturn SC

1 Answer

Daytime running lights Everytime I turn on my car my DRL relay clicks about six times and then stops,After that my daytime running lights don't work.


make sure daytime running lights are on,you may only need to pull the emergency brake pull handle up and same time lift the emergency brake pedal up by hand while you have the e-brake pull handle up. hope this helps and thank you for choosing fixya.com

Dec 31, 2010 | 2001 Chevrolet Cavalier

1 Answer

How do I disable the daytime running lights on a 1999 dodge durango? I installed hid headlights and when the ignition is on the lights flicker and the module makes a noise due to drl's


this actually happened to me. i would recommend locating the 'DayTime Running Lights' fuse and pull that fuse out. this worked for my 2001 Chevy Cavalier. Hope this helps
~milbrandt23

May 14, 2010 | 1999 Dodge Durango

1 Answer

Mazda daytime running lights


THERE IS A FUSE MARKED DRM IN THE FUSE PANEL [MAY NEED THE OWNERS MANUAL TO LOCATE IT].CHECK IT FIRST.IF IT'S GOOD YOU PROBABLY NEED A NEW MODUAL.FUSE MAY BE MARKED AS DLM.

Oct 07, 2009 | 2007 Mazda B4000

2 Answers

Daytime running lights no longer work after using handbrake.


When the parking brake is applied there is a switch that will cut off the daytime running lights, and they will not work as long as the parking brake is applied. If you have released the parking brake and they no longer work, either the switch that cuts them off is bad or the sensor for the lights is bad.

May 03, 2009 | Chevrolet Express Cars & Trucks

1 Answer

Daytime Running lights wont come on on my 2000 Grand Am SE.


Do your high beam headlights work? If you have a burnt high beam light the daytime running lights won't work and then the service vehicle soon light comes on.

Mar 22, 2009 | 2001 Pontiac Grand Am SE

1 Answer

Headlights alternate on and off left and right daytime/high beam


although the underhood relay panel is common, I'd check your headlamp bulbs first, these are cheaper than the fuse box. The daytime running lights work off the high beam circuit, thus, a blown highbeam bulb could be the culprit, the fusebox solution was more common on 2001 and up modles, although it's a definite possibility.

Feb 18, 2009 | 2000 Dodge Caravan

1 Answer

93 chev Blazer


perhaps i missed something here... lowbeams and daytime lights are about the same.... be that as it may... the merely obvious thing is that the low beams are burnt out.... next thing would be that the relay for the day time lights could be defective... it's often mounted on the firewall.

Robert

Nov 12, 2008 | 2001 Chevrolet Blazer

Not finding what you are looking for?
2001 Mitsubishi Eclipse Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...