Help I have replaced the starter and the battery and it still does one click

There's a website that has all this information about all this and manuals everything totally free there are many actually but I personally like few .. let me know if u need help
thanks

You have bought a faulty Starter, Replace it

The solenoid click sounds very strong, implying that you have a charged battery and the ignition circuit is functioning out to the solenoid. Suspect an issue with the starter motor. Is the starter motor installed and connected properly?

Check battery connections and battery fuse. Battery may not be large enough for the size of your van

Its in engine compartment under hood.
On the lower side.
First test the starter before directly replacing it.

It can be faulty starter or there is loose connection from battery to starter. The starter assembly gets power from battery. Check voltages at starter wires and see if you are getting 12 volts or not. If not then its no power issue due to low battery volt or no connection between battery to starter.

------------

To solve these problem, I suggest you to refer these direct help links:-----

Click the link below: ------

-----------

How to test starter solenoid?

http://schematicsdiagram.blogspot.com/2011/06/how-to-test-starter-solenoid.html

--------------------

How to test cars starter?

http://schematicsdiagram.blogspot.com/2011/06/how-to-test-cars-starter.html

------------

How to replace starter in car?

http://schematicsdiagram.blogspot.com/2011/06/how-to-replace-starter-in-car.html

------------

These will help.

Thanks.

It can be faulty starter or there is loose connection from battery to starter.The starter assembly gets power from battery.Check voltages at starter wires and see if you are getting 12 volts or not.If not then its no power issue due to low battery volt or no connection between battery to starter.

------------
To solve these problem,i suggest you to refer these direct help links:-----
Click the link below :------
-----------
How to test starter solenoid? http://schematicsdiagram.blogspot.com/2011/06/how-to-test-starter-solenoid.html -------------------- How to test cars starter? http://schematicsdiagram.blogspot.com/2011/06/how-to-test-cars-starter.html
------------ How to replace starter in car? http://schematicsdiagram.blogspot.com/2011/06/how-to-replace-starter-in-car.html

------------

These will help.
Thanks.

It wont crank,just clicking noise. The battery terminals are not connected properly. Recheck battery connections.If battery connections are properly connected then its possible that starter and starter solenoid are not receiving voltage,due to this its just clicking. Most probably its connection issue between battery terminals or problem with starter and starter solenoid connections. ----- Click this link below for more troubleshooting:--- http://technoanswers.blogspot.com/2011/10/2002-ford-escape-will-not-startjust.html ---------- This will help.Thanks.Helpmech.

you may have a bad starter relay, or bad starter colenoid, best solution, have starter relay checked, if good, replace starter, does it click when you try to start?but won't? clicking indicates bad battery connections, bad starter colenoid, or simply bad starter. sometimes it's better to replace the whole starter, considering how much it costs to check all the above. suggest that you have battery checked for free at autozone or advance automotive for free. if battery checks good, replace starter. if you accept my solution and it works, let me know via fixya.com and thank you for choosing fixya.com

replace the starter, the selenoid is screwed (selenoid located on the starter) easier to replace the whole starter

sounds like starter relay or solenoid.