Question about 1996 Ford Taurus

Open Question

I have a ford taurus gl 1996 i blew headgasket water and oil mixed

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

GL model. What are the specs for brake lines and fittings


Hi Audrey, Just tell the sales person at the auto parts store you need brake pads for a 1996 gl ford taurus and they'll look up the parts for you, I hope this helps..........CHEERS..

May 07, 2016 | 1996 Ford Taurus

1 Answer

Where do I put in the transmission fluid in a 96 Ford Taurus 3.0 6-cylinder?


Look for the red dip stick the yellow is always engine oil the red is the transmission don't mix them up . You can add transmission fluid down this tube. However if your haveing shifting problems look at the color of the existing oil and smell it . It shouldn't smell burnt and should be red in color if it is you may need to have the flushed and serviced to keep it from dieing on you . Its a lot cheaper them replaceing the trany

Mar 17, 2012 | 1996 Ford Taurus

2 Answers

I have a 1992 ford taurus GL, 3.8ltr V6. the oil dip stick has water mixed with the oil,(the oil is white "frothy"), what are the possible causes of this? P.S. there is no oil on the ground...


HATE TO SAY YOU HAVE BLOWN HEAD GASKET.NEED TO FIX QUICK.CHANGE ENGINE OIL AND FILTER BECAUSE CONTAMINATED OIL WITH ANTIFREEZE WILL CAUSE ENGINE BEARING FAILURE.ANTIFREEZE WILL DILUTE ENGINE OIL.

May 06, 2011 | Ford Taurus Cars & Trucks

1 Answer

My car immediately overheats, white smoke from exhaust, and seems to be water getting in the oil. 1997 ford taurus gl 3.1 liter


white smoke is from the coolant getting mixed with the engine oil
Head gasket replacement is in order

Aug 22, 2010 | Ford Taurus Cars & Trucks

1 Answer

1994 audi80 petrol oil and water mixing.


How did you determine that there is petrol in the mix? Oil and water mixing will show grey on the oil dipstick. Clear indication that you have a blown headgasket. Get the cylinder head off, have it resurfaced(at an engineering shop), new headgasket, reassemble, and Bob's your uncle you're under way again.

Jun 22, 2010 | 1997 Audi A4

1 Answer

I overfilled my transmission fluid on my 96 taurus gl, now it won't shift into gear. Did i blow the trasmission?


It is probable that you blew out the seals and will need your transmission repaired. You can try to slip a small hose down the dip stick tube and draw out the extra fluid, there is a slight chance that your transmission will work if you get the fluid level back down where it should be.

Jun 06, 2010 | 1996 Ford Taurus

1 Answer

I need a new Trans for a 1996 ford Taurus GL wagon.


The best way is to use the vehicle VIN number, here is a link to a Ford Vin Number Look-up site, that will tell you the transmission code and the type of transmission you have:
https://www.fleet.ford.com/maintenance/vin_tools/default.asp

May 23, 2010 | 1996 Ford Taurus

2 Answers

I have a 1996 Ford Taurus GL and need to add freon


if the port you are trying to connect to is bigger than the connector on the hose, then that is the wrong one. that's the high side. you want to connect to the low side, which is a smaller fitting. the fittings for 134a are quick disconnect.

Mar 19, 2010 | Ford Taurus Cars & Trucks

1 Answer

I need a fusebox diagram for a 1996 ford taurus


For Fuses Location and Description, review the Taurus Owners Manual (page 125 and next).

I hope help with this (remember rated this help) Good luck.

Dec 15, 2009 | 1996 Ford Taurus

Not finding what you are looking for?
1996 Ford Taurus Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...