Question about 1998 Audi A6

1 Answer

Have just renewed two front brake noses that were damaged,abs l

Have just renewed two front brake noses that were damaged, and bled the brakes front and rear,all seems fine ,but my abs warning light has come on ,any idea,s on why this . my car is an audi a6 the year is 1998,need to fix it asap ,for my mot, cheers from simon dixon.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,874 Answers

ABS System must be obligatory bleeded also using a diagnostic scantool like VAS, VAG-COM, Bosch KTS, ... connected to the Data Link Connector (DLC) of the car. In the ABS Electronic Control Unit (ECU) menu, select the ABS bleeding option, then follow instructions on the screen !!!

Posted on May 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Installed new front brake lines, now after trying to bleed them it supposdly will not let the fluid to bypass the abs. system. ?


Before bleeding brakes make sure you disable abs system. I usually remove the abs fuse for that time. With abs on you cannot bleed brakes properly. If still having problems then check new brake lines for glitches that might have happened during the install.
PS: Don't forget to put back the abs fuse after you are done! Otherwise you still have brakes but not with abs feature.

Dec 04, 2013 | Cars & Trucks

1 Answer

No brake pressure...


I would keep bleeding. If there is not any brake fluid leaking, there must be air in the system. with the master cyl cap off, open one bleeder valve on the front and let it bleed for 10 mins. close and repeat with the rest. there must be an air bubble in the system! good luck

Nov 07, 2013 | Ford F-250 Cars & Trucks

1 Answer

Brakes on a Lincoln mark viii coupe 1995 fitted new M/cylinder L/front and R/rear wont bleed is somthing wrong in the abs and how much for a new unit


All four brakes must be bled to eliminate the trapped air...probably not anything else...try lubricating the bleeder fitting with PB Blaster before trying to open...be cautious as this valve can break off, and that means rebuild the caliper drill out broken fitting...or replace caliper...either way all 4 brakes must be bled...start with the rear farthest away from the master cylinder then other rear...then right front, then last is left front...Hope this helps.

Sep 06, 2012 | 1995 Lincoln Mark VIII

1 Answer

1937 ford coupe relpaced booster brake pressure when off/no pressure when started


Try checking with either propane or water mist on all hoses and surfaces where generated vacuum could escape.

Activator rod from Brake pedal to Master cylinder can be adjustable on some models.

Jul 20, 2017 | Ford C Cars & Trucks

1 Answer

No pressure on brake pedal 95 suburban 2500 4x4 7.4L


try bleeding your ABS block first, if that doesn not work could need a master or proportioning vavle. Some scan tools are capable of bleeding the ABS system on some vehicles, and some you have to bleed manually.

Apr 07, 2012 | 1995 Chevrolet Suburban

1 Answer

I changed the front brake rotors and pads also the rear cyliners and shoes and bled the rear brakes but not the front because i didnt disconect the front brake lines. So why is my brake pedal so soft? and...


keep bleeding and bleed the front as well the littlest amount of air will keep pedal spongy if the abs came on after doning brakes check the abs lines and connections up front the abs lines sometimes get banged up will doing brake job the abs sensor is the wire that runs from behind the rotor to the fire wall sometimes they get hit knocked into or damaged if wiring looks good have vehicle scanned for code .the code will make it easier to pinpoint what side-- if circuit problem--or if sensor went bad most auto stores offer scanning for free

Jul 07, 2011 | 1995 Chevrolet Tahoe

1 Answer

I have a 1987 bmw 535is, I replaced the abs pump,and bled the system, the left front brakes and rear right are not working. only two wheels are braking. how to solve this


normally abs system use two seperate module unit. each module control the front and rear whell by crossside like u said the front left and rear back are disfuntion. maybe ur replacement abs module have prob or trie 2 bled again

Mar 27, 2010 | 1987 BMW 5 Series

1 Answer

Abs problems i have a 98 k1500 the front right


Inspect the ABS sensor on the front wheels, make sure that there is no damage to the wire leads and that the ABS sensor is not damaged or touching the speed ring on the front wheel hub. You may be luck and the ABS sensor is dirty, it can be cleaned with a good spray of brake parts cleaner and make sure the ABS is not loose from the mounting bracket on the hub. Good luck and keep me posted.

Mar 06, 2010 | Chevrolet Silverado 1500 Cars & Trucks

2 Answers

1989 Ford F350 2 wheel drive dually 460 ci gas motor


5 Inspect Brake Fluid Type Brake fluid loss or contamination grey_line.gif 10 Inspect Master Cylinder (Brake System) Worn or leaking brake master cylinder. grey_line.gif 11 Inspect Brake Power Booster Damaged booster vacuum line/check valve, or diaphram

Nov 24, 2008 | 1989 Ford F 350

Not finding what you are looking for?
1998 Audi A6 Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14223 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...