Question about 1994 Jeep Grand Cherokee

1 Answer

How can I disconnect secirity system for my 94 Jeep it is causing all kinds of issues

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 82 Answers

It depends on whether the system is oem or aftermarket. If it is OEM then you can refer to the owners manual. It will usually tell you which fuse is for the security system. The problem with if it is oem is that the fuse it probably linked to some other system that you might have to have to operate the vehicle.
If it is aftermarket there will be a fuse inline that you can pull and disable the system.
You might try to just take the key and lock and unlock the door and this should reset the system.
You can take the vehicle to most shops or audio shop for help disabling system.
I hope something here will be of help

Posted on May 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I had a problem you replied to on a 94 jeep cheroke you said to recycle the key i done that i came up with two numbers 12 then 55 how do i find out what they mean that is good info i have never heard of...


#12 means that the battery had been disconnected within the last 50 times the Jeep had been started.

#55 signals the end of the diagnostics test.

There's no problem. At least not one that's causing a code. 12 and 55 are normal.

Jan 19, 2011 | Jeep Cherokee Cars & Trucks

1 Answer

I need to locate thermostat on 94 jeep grand cherokee


If necessary, disconnect the coolant temperature sensor electrical connector. Disconnect the upper radiator hose from the thermostat housing. Remove the attaching bolts and lift the housing from the engine.

b1db910.jpg

d2da5ef.jpg

More details can find in ZJ-Secc-7-Cooling-System

Hope helped with thos (remember rated this help). Good luck.

Nov 30, 2009 | 1996 Jeep Grand Cherokee

1 Answer

94 Jeep Grand Cherokee heater coil has been replaced wont start


If you have a security system, close all the doors and then lock the drivers door with the key, then unlock it. That should re-set the system. I've had the computer completely disconnected from mine several times (used it to check another vehicle) and I don't have security...it started and ran fine...only difference between the two is the security so I'd try that.

May 24, 2009 | 1994 Jeep Grand Cherokee

2 Answers

Pcm trouble codes.


You can either use a auto scan tool to clear the code's, or you can unplug the battery negative cable, if you have a anti-theft system you may have problem's after disconnecting the battery?

Apr 21, 2009 | 2003 Jeep Wrangler

1 Answer

Battery charge spiked up on 1994 jeep grand cherokee ltd.


check the battery cable connections, are they clean and tight? This can cause the charging system to spike and go into the 16-17 volt range, the other thing is a problem with either the alternator or the voltage regulator, a diode that is failing can cause this issue.

Dec 18, 2008 | 1993 Jeep Grand Cherokee

2 Answers

Catalytic converter question 94 Jeep 4.0


Most likely yes, why remove it, it only pulls about 1-2 HP at wide open throttle.

Nov 25, 2008 | 1994 Jeep Wrangler

1 Answer

94 Jeep won't start Security system draining battery


Find and pull the fuse. Even aftermarket units have a fuse somewhere.You will need a new battery after you find the problem as starting batteries do not tolerate going flat too many times. They are not designed for it.

Nov 11, 2008 | 1994 Jeep Grand Cherokee

1 Answer

94 jeep wrangler overheating


Have the cooling system pressure tested. If it holds pressure, that's a good thing. If it doesn't hold pressure, you may have a leaking head gasket. What may be happening is the crack in the head gasket could be blowing hot air into the cooling system causing it to overheat.

Sep 27, 2008 | 1994 Jeep Wrangler

1 Answer

94 jeep cherokee ac blows cool on medium only. recent recharge freon help cool more.


could be anything overcharging the system, freon leak faulty componets like compressor or clogged lines or orfice tube or dirty evap. coil check for 12 volts comming into the blower motor with ur switch on high if ur getting 12 volts at the plug then replace ur blower motor

Jun 21, 2008 | 1994 Jeep Grand Cherokee

Not finding what you are looking for?
1994 Jeep Grand Cherokee Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...