Question about 1996 Isuzu Hombre

1 Answer

My new radiator blew out, the engine got hot and now it wont crank ?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,374 Answers

First call "1800 radiator 'and get yourself a new radiator delivered and warrantied CHEAP.
Then look over condition of battery, cables and ignition wires and coil distributor,rotor , coil pack,
(whatever is applicable to your vehicle) Something got wet. keep me posted.

Posted on May 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Blown radiator.. Jeep wont start?


About 271,000 results (0.50 seconds) Search Results

    1995 YJ 2.5 overheated BAD, blew radiator apart, now won't start ...

    www.jeepforum.com > ... > YJ Wrangler Technical Forum

    Jun 2, 2014 - 15 posts - ‎4 authors
    I ran a few searches here, read the tech sections, checked my hanes manual and so on, still a bit baffled. Was driving my 1995 2.5l automatic ...

    Part 1 -How to Test for a Blown Head Gasket (Jeep 4.0L)

    troubleshootmyvehicle.com > Jeep > 4.0L
    Apr 20, 2011 - 4.0L Jeep Wrangler, 4.0L Cherokee and Grand Cherokee. ... Before youstart any of them, take a look at the entire article first. ... engine oil and coolant, a burned head gasket won't be able to keep any of them separated. 3.

    Overheated replaced radiator hose won't start now what do I ...

    repairpal.com > Questions > Dodge > Caravan > 2005 Dodge Caravan
    Jul 2, 2013 - Blew a hole in radiator hose. Thermostat was stuck n failed. Replaced hose removed thermostat. Car will not start now. It started after hose ...

    Jeep GC 2000 Overheated and now won't start! - Tech Support Forum

    www.techsupportforum.com > ... > Automotive Support

    Jan 17, 2012 - 7 posts - ‎2 authors

Feb 03, 2016 | Jeep Cars & Trucks

1 Answer

05 ford ranger started knocking then blew of radiator hose now it wont start


The knocking (as opposed to pinging) could indicate lack of oil or a bad oil pump. If it was the lack of oil then that, in turn, could cause overheating and a subsequent blown radiator hose. In addition, depending on how long you ran the engiine while it was knocking, you could have driven off a pistion rod cap while the pistion seized up in the cylinder. If the engine won't crank or cranks with some undesirable metal on metal noise you may have an engine job (or a new short block)in your future. My arm wave analysis may be modified by some additional information.

Aug 02, 2012 | 2005 Ford Ranger

3 Answers

1992 geo prizm - radiator hose broke and replaced, but car won't start now - ideas?


you said it cranks then you said it wont turn over if it wont turn over you might have get the engine to hot and seized the engine please spesifiy if the engine turns over or not

Jun 09, 2012 | 1992 Geo Prizm

1 Answer

Audi A4 1.9tdi Quattro 1997- Blower fan was only blowing cold air. Changed intercooler radiator as it was leaking, but fan still blowing cold air. engine temp went over half and then came back down. Only...


REPLACE THERMOSTAT.MAKE SURE COOLANT SUPPLY PIPE OR COOLANT RETURN PIPE NOT STOPPED UP AND YOU HAVE ENOUGH COOLANT IN THE SYSTEM.REPLACE THERMOSTAT.CRANK ENGINE UP AND LET IDLE UNTIL WARM UP KEEP EYES ON TEMPERATURE GAUGE. WHEN ENGINE THERMOSTAT OPEN COOLANT HOSE SHOULD BE HOT.IF NOT TURN OFF ENGINE.USE LARGE RAG WAIT A WHILE BEFORE REMOVING RADIATOR CAP CHECK TO SEE IF COOLANT LEVEL DROPPING IF SO ADD MORE COOLANT.CRANK ENGINE UP UNTIL THERMOSTAT OPENS UP.HOSE WILL GET HOT.IF STILL COLD CHECK COOLANT LEVEL.ONCE YOU AIR OUT COOLANT SYSTEM RADIATOR HOSES WILL GET HOT SO YOU WILL GET HEAT.IF COOLANT LOW YOU WONT GET NO HEAT.

Jan 09, 2011 | Audi A4 Cars & Trucks

1 Answer

Car overheated and wont start, does crank over, it blew a radiator hose, replaced it, but still wont crank over


Sorry! sounds like this one is too far gone! If it blew the radiator hose off the engine, then the head gaskets or the cylinder head itself has failed. You will quite possibly need a new engine put in your Cavalier.

Nov 26, 2010 | 1991 Chevrolet Cavalier

1 Answer

Car turns over but does not start. Battery good


If it over heated, could have bad head gasket's, fill radiator with water, crank engine with radiator cap off, if water is push out of radiator while cranking, bad head gaskets', also remove spark plug's, crank engine if any water, bad head gasket, also when spark plug's removed, check for any water on them.If there is any water on plug's, bad head gasket, also could try doing a cylinder compression test, if bad compression, head gasket, no compression, wont start that way.

Aug 30, 2010 | 1990 Ford Thunderbird

2 Answers

Would my car still run if i had a blowen head gasket? it blew ati-freeze out the tail pipe but ppl that had it before me had a hole in the radiator and put sealer in it.so some are tell me it might nit be...


Blown head gasket if antifreeze is coming out from the tail pipe and yes the engine will still run, but not for long. Antifreeze is corrosive to the crank shaft bearing and will cause you a new engine if engine keep running with antifreeze mixed with the oil.

Feb 16, 2010 | 2000 Ford Taurus

2 Answers

Radiator blew at seam replaced radiator and cap, every thing systematic fan and all. now engine light came on engine and radiator hot to touch


Did you run engine from cold, and add coolant as needed, with HEATER ON, when you were re-filling the system after replacing rad? If not, do so, and leave cap off until rad fan comes on & off 2 or 3 times, then put cap back on & try it.

Oct 31, 2009 | 1994 Toyota Camry

1 Answer

Missing after s/r radiator and over heating


When it overheated you may have warped your cylinder head(s) and now coolant got into one or more cylinders. Take out your plugs and crank your engine and take note of any liquid being shot out of any cylinders. If you have a compression gauge, put it in each cylinder and crank the engine until you get the highest reading. Watch the gauge and if you see the pressure dropping, you have a pressure leak probably from a warped head from overheating.

Note: Never remove a spark plug from a hot engine if you have aluminum heads.

Apr 26, 2009 | 2005 Dodge Ram 1500

1 Answer

I have purchased a thermostat, water pump, and radiator. Then after all this a hose blew off, then eventually the radiator had holes in it. I took it back to where I bought the radiator and they replaced...


Sounds like bull sh*t to me. the only thing to look for is constant air bubbles when the engine is hot and the radiator cap is left off
(this would mean you had a leaking head gasket. If there was to much pressure the the radiator cap would leak steam before anything else blows. Are these secondhand radiators your trying? as they sound like rubbish if the hose blew it's most likely from a blocked secondhand radiator which needs to be repaired. Don't trust dodgy car wreckers. cheers

Mar 31, 2009 | 1998 Subaru Forester

Not finding what you are looking for?
1996 Isuzu Hombre Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14379 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...