Question about 2002 Dodge Grand Caravan

1 Answer

For quite awhile now my power window wouldn't go down. Yesterday with no one touching a button it went down now its completely down, and its stuck. help please.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,857 Answers

Most likely the switch is bad.. If were talking about the driver window then the driver switch is bad. If any other window is the problem then either the driver switch is bad or the swtch for the window in question is bad. Or you have wire that is shorting maybe in the door or the door jam area

Posted on May 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does the power window button blink on and off and the automatic feature doesn't work in the 2008 Toyota Sienna?


NOTE:
Anytime the batteryterminal has been disconnected, please initialize the driver's door power windowand front passenger's door power windowafter reconnecting the batteryterminal.

With ignition switchin the "ON" position, do the following:

1. Push down and hold the driver's door power windowswitch to completely open the window.
2. Pull and hold up the driver's door power windowswitch until the window closes.

Continue holding the switch for approximately one second until the switch changes from blinking to a constant illumination.
3. Check for proper operation of the "one-touch open and close" function by fully pushing the switch briefly to the "DOWN" and "UP" positions.

At this time the power window switchfor the passenger's door windowshould be blinking.
4. Push down and hold the passenger's door power windowswitch to completely open the window.
5. Pull and hold up the passenger's door power windowswitch until the window closes.
Continue holding the switch for approximately one second until the switch changes
from blinking to a constant illumination.
6. Check for proper operation of the "one-touch open and close" function by fully pushing the switch briefly to the "DOWN" and "UP" positions.

Feb 09, 2016 | Toyota Cars & Trucks

1 Answer

2010 Mazda 3 power steering quit warning light is on


Could be the power steering pump is bad.

Dec 06, 2014 | 2010 Mazda MAZDA6

1 Answer

Rear power windows don't work on 2002 envoy


may the switch from the front went out

if you can roll the back windows down the back doors then i would check the window motors

Sep 08, 2012 | 2002 GMC Envoy

1 Answer

Power windows and locks


look in the engine fuses and if that dont work pull em out one by one and check em all

Jun 17, 2009 | 1989 Toyota Camry

2 Answers

2002 Nissan Xterra drivers power window wont roll down


Quite possibly yes...I would first check any relays and/or fuses just in case.  A few dollars for a fuse or relay is much cheeper than say $100.00 and a few hours of labor.  
You can purchase just the window motors from any major auto parts stores.  You can also purchase the window motor with the regulator.  The regulator is kind of like a rope and pulley system to lift the window up and down and the motor is attached to this assembly.  It is a little more expensive but I would change both.  I always change both just in case the regulator is bad and it isn't the motor.  You will have to remove the plastic interior of the door in order to change either the motor or the motor/regulator assembly.

Any questions, feel free to ask!

Feb 04, 2009 | 2002 Nissan Xterra

Not finding what you are looking for?
2002 Dodge Grand Caravan Logo

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...