Hi, have an e90 325i non idrive. cant access phone menu

To connect Bluetooth on an Audi A4b6 CD player (Concerts 2), you will need to follow these steps:

1. Make sure the CD player is turned on.
2. Press the "Menu" button on the CD player to access the main menu.
3. Navigate to the "Settings" menu using the arrow buttons on the CD player.
4. Select "Bluetooth Settings" from the menu.
5. Follow the prompts on the screen to enable Bluetooth on the CD player. This may involve turning on the Bluetooth function on your phone and selecting the CD player from the list of available devices.
6. Once the CD player is paired with your phone, you should be able to use the Bluetooth function to make and receive phone calls, stream music, and access other Bluetooth-enabled features.

Hi
Normally when you try and connect or pair your device it normally ask for code. mostly its 0000 or 1234

thanks

iDrive died - Bimmerpost

f30.bimmerpost.com/forums/showthread.php?t=957004
Mar 11, 2014 - 12 posts - ‎5 authors
The system shortcircuited and fuse 142, which is in the circuit together with iDrive, gotblown. The controller has also gone. BMW decided that ... Fuse box diagram
22 posts
Dec 19, 2013
Horn does not work AGAIN!
22 posts
Feb 4, 2013
More results from f30.bimmerpost.com

iDrive Controller dead. What fuse? - Bimmerforums

It's a feature you can set in iDrive that warns you when you go over a specific speed. You can change the limit or disable it in the settings menu through your iDrive.

Hi,

The bluetooth on car is not compatible with your phone.
Usually Nokia phone, can connect easily to other device in bluetooth pairing, so can try with this phone brand.

regards

I have a 2009 Buick Enclave...a few months ago out of the blue, my blue tooth does not work...the phone rings in, but when I press talk on steering wheel...it goes quiet...it's connected but they can't hear me and I can't hear them....the phone worked fine, then one day it just started acting goofy...any suggestions? I have deleted, paired, unpaired!

Try deleting the stereo from your bluetooth profile in your phone. Then try disconnecting the positive battery lead for a minute or so and reconnecting to reset the stereo. Then try again. If not, contact Kenwood support, and if it's still under warranty period, I would complain :)

You need to go to your bluetooth menu in your phone and search for audio devices but at the same time you need to search for the phone in your i drive menu in the buetooth funtion . Be carefull and dont go into communication menu in your idrive press down on the button and scroll down. when the vehicle and phone find each other enter 0000 as the passkey unless you have changed it. Jst bare in mind just because they both have bluetooth does not mean they are compatable. the year of your car determines the level of software in your control unit in the car but updates are available from bmw dealers

your '99 might be "equipped with bluetooth" which means the car is wired for it, but may not have the module(s) for it. same is true for the 6 disc changer in the trunk on the LH side. its wired for it, but not necessarily has it installed.

call your BMW dealership (parts dept) with your VIN (actually the last 7 numbers is all they should need) and they can tell you if the car is "wired for bluetooth" or actually has bluetooth installed.

Go to your cellular phone company and tell them the problem, they got t fix it. unless you didn't bought the Idrive from there... in that case buy a new Bluetooth from them and insure it.