Question about 2003 Ford Crown Victoria

1 Answer

The car idles fine but makes a whirring noise when accelerator is depressed. The car shifts into gear but doesn't move when given gas.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 12 Answers

Transmission filter and fluid needs changing and, for 70 bucks, needs to be flushed. This maintenance should be done every 100000 miles, at most; I do mine at 70000.

Posted on May 10, 2010

  • John Shelton Jan 26, 2014

    I forgot to add that, every time you flush the transmission, most cars need the bands readjusted. I found this out the hard way on a 94 Ford sedan; the guy that did the flushing, as I dont have the machine, didnt adjust the bands. The transmission went 2 months later when nothing was wrong with it before maintenance.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine cut out


Sounds like you may have fuel filter problem. you may want to check the pump and filters located in or near the fuel tank.
Go directly to the source ( Fuel Tank, Pump, Filters, Fuel Pressure Regulator and Injectors )
You may have water or grit in the fuel
Hope this helps

Mar 22, 2014 | GMC Sonoma Cars & Trucks

1 Answer

89 manuel trans has lowd whirring noise when idling


The entire slave cyllinder & throw out assy
has to be replaced

Dec 13, 2012 | Dodge Cars & Trucks

1 Answer

I have a 96 Toyota Tercel 4 speed manual car. When I pull off it makes a rattling noise that comes from the front end. When I press the gas it makes the noise but when I am shifting gears the noise...


rattling noise from front, first rule out any loose heath shield check exhaust system, and also your engine mounts when given gas your engine shifs under torque and when you let off the gas to shift engine moves back(no load, torque) if loose or broken mounts may cause interierence on moving parts(binding). do this firts good luck

May 13, 2011 | 1996 Toyota Tercel

1 Answer

My Sable will turn on fine but when i try shifting the gear they won't go in the shifter just glides along and the car remains idle. The day it started doing this it made a loud screeching noise and...


If the shifter moves but does not feel like it is trying to put car in gear the cable that goes from the shifter to the transmition could have broke or came loose. If that happened while driving the gears may have tried to shift when tension was released from the cable.

May 10, 2011 | 1999 Mercury Sable

1 Answer

Wont shift out of 2nd gear but used to if you would let of the accelerator and let it idle down then it would shift but wont shift at all now


Check cable from throttle linkage to transmission that operates throttle valve on transmission. Not uncommon for the linkage at transmission to be pulled all the way when gas pedal pushed for quick acceleration, or passing, and stay stuck there. Engine off, wheels blocked for safety and/or park brake on, have someone depress gas pedal all the way to the floor slowly, while you watch linkage that cable is attached to on transmission. Then as they release pedal, it should move back in opposite direction. Spray it well, with WD-40 or similar lube and get it moving by hand if necessary to make sure it is fully returning. That may be all it is.

Dec 31, 2009 | 2006 Dodge Ram 2500

1 Answer

Gear shifting


Adust clutch cable.Test...start the car in first gear with clutch fully depressed, parking break off. Slowly release the clutch. determine when the vehicle starts to move. If clutch is fully depressed call that 100%, fully released is 0%. The vehicle should be moving at around the 55-45% range.

Dec 02, 2009 | 2002 Nissan Xterra

Not finding what you are looking for?
2003 Ford Crown Victoria Logo

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...