Question about Cars & Trucks

1 Answer

Remote auto start will not start a 2007 chevy suburban ltz

Posted by Anonymous on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 343 Answers

If the keyless remote works to unlock and lock the doors, then it should start the engine. In order to use this feature, you have to lock the doors (make sure that all door lock by pushing the lock button twice) with the remote by pushing the lock button, then you hold down the start button on the remote for 2 to 3 seconds and it should start. You can start and stop the engine with the remote 2 or 3 times with the remote, after that it will no longer let you use the remote start until you physically get in the car and start the engine to reset the system. Check your driver information center options using the steering wheel controls. There is an option to enable and disable the remote start option.

Posted on May 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I had my transmission fluid changed on a 2007 Chevy suburban LTZ and now it doesn't work properly. What to do?


Take it back to the shop that did the repair ... if you can not drive it have them come get it.

Nov 25, 2013 | Cars & Trucks

1 Answer

Where is the keyless remote located on a 2007 chevy suburban


Sounds like you've got something loose or broken inside the remote,open it and take a look, you may also have the rubber gasket that is not properly seating between the remote halves,also check to see if all buttons are fitting in properly.
If inside is broken or loose may need replacement, only obtainable from dealer.

Mar 03, 2013 | 2007 Chevrolet Suburban

2 Answers

My retractable running board on the drivers side of my chevy suburban sometimes won't drop down. You can open and close door several times and it finally will work. The dealership doesn't know how...


I've had numerous issues just this summer with my 2008 LTZ Suburban. The dealership has replaced the battery, some module and, it's back in as we speak to have both runnimg board motors replaced because they both locked up again! A friend of mine owns a 2009 LTZ Suburban and has started having intermittent problems with her running boards, too. When it's time to up-grade, I will NOT be getting retractable running boards again!!

Sep 25, 2011 | 2007 Chevrolet Suburban Three-Quarter-Ton...

1 Answer

When I auto start my 2007 chevy tahoe LTZ the air/heater doesn't come on. I leave it set the night before but it doesn't come on when I auto start.


the circuit that powers the blower motor for the heater. if this is a aftermarket auto starter i sugjest taking it back to who installed it

May 18, 2011 | 2007 Chevrolet Tahoe

1 Answer

I have recently purchased an 97 suburban it comes with a remote starter but i hae tried to start it via the remote and nothing happens i know that its soposed to work cause its the ltz model thanks for...


if you know the battery in the remote is good, you may need to reprogram the remote. does your keyless entry work? are they both on the same remote? ive reprogramed a replacement keyless entry for a 97 by using a short jumper wire on the obd II plug. you have to jump two of the pins and then hit the remote button a few times till it locks/unlocks then its synced. off hand i dont remeber which pins but google is your friend. not sure if this will also work on the remote start, if they use the same remote than it should.

Feb 21, 2011 | Chevrolet Suburban Cars & Trucks

2 Answers

Rear hatch does not open an latch or remote


I inadvertently hit the switch on my Denali between the sunroof controls and rear bucket seat auto fold down switches. The switch disables the automatic operation of the rear hatch. The dealer didn't enev know.

May 25, 2010 | 2007 GMC Yukon Denali

1 Answer

What should the oil pressure be for a 2007 chevy avalanche


Start up with the engine cold, should be 60-65 psi Start up with engine hot and also running in gear idling 42-48psi
Any other readings could be a bad oil pressure sending unit or a oil pressure relieve valve which is located on the block where the remote oil line is bolted to. Good luck and keep me posted.

Feb 22, 2010 | 2007 Chevrolet Avalanche LTZ

1 Answer

Chevy Subruban 2007 remote control


you will have to take it to a chevy dealer to have it reset...

Feb 28, 2009 | 2005 Chevrolet Suburban

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...